json parse error 1454

[whitewidow73]

could someone point me in the right direction and tell me were ive gone wrong I'm very new to all this . thanks in advance. /*

• GPU configuration. You should play around with threads and blocks as the fastest settings will vary.
• index - GPU index number usually starts from 0.
• threads - Number of GPU threads (nothing to do with CPU threads).
• blocks - Number of GPU blocks (nothing to do with CPU threads).
• bfactor - Enables running the Cryptonight kernel in smaller pieces.
• Increase if you want to reduce GPU lag. Recommended setting on GUI systems - 8
• bsleep - Insert a delay of X microseconds between kernel launches.
• Increase if you want to reduce GPU lag. Recommended setting on GUI systems - 100
• affine_to_cpu - This will affine the thread to a CPU. This can make a GPU miner play along nicer with a CPU miner.
• On the first run the miner will look at your system and suggest a basic configuration that will work,
• you can try to tweak it from there to get the best performance.
• A filled out configuration should look like this:
• "gpu_threads_conf" :
• [
• { "index" : 0, "threads" : 64, "blocks" : 45, "bfactor" : 6, "bsleep" : 25, "affine_to_cpu" : false},
• ],
  { "index" : 1, "threads" : 64, "blocks" : 45, "bfactor" : 6, "bsleep" : 25, "affine_to_cpu" : false}, ],
  { "index" : 2, "threads" : 64, "blocks" : 45, "bfactor" : 6, "bsleep" : 25, "affine_to_cpu" : false}, */ "gpu_threads_conf" : null, [ { "index" : 0, "threads" : 64, "blocks" : 45, "bfactor" : 6, "bsleep" : 50, "affine_to_cpu" : false},
• ],
  { "index" : 1, "threads" : 64, "blocks" : 45, "bfactor" : 6, "bsleep" : 50, "affine_to_cpu" : false}, ],
  { "index" : 2, "threads" : 64, "blocks" : 45, "bfactor" : 6, "bsleep" : 50, "affine_to_cpu" : false}, / /
• TLS Settings
• If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption
• to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.
• use_tls - This option will make us connect using Transport Layer Security.
• tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.
• tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it. */ "use_tls" : false, "tls_secure_algo" : true, "tls_fingerprint" : "",

/*

• pool_address - "",
• wallet_address - "",
• pool_password - "x", */ "pool_address" : "pool.minexmr.com:7777", "wallet_address" : "left out for this post", "pool_password" : "x",

/*

• Network timeouts.
• Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make
• sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for
• nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -
• long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the
• server usually takes to process our calls.
• call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.
• retry_time - How long should we wait before another connection attempt.
• Both values are in seconds.
• giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners
• don't mine while the connection is lost, so your computer's power usage goes down to idle. */ "call_timeout" : 10, "retry_time" : 10, "giveup_limit" : 0,

/*

• Output control.
• Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal
• really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal
• performance monitors, there is very little reason to spew out pages of text instead of concise reports.
• Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.
• verbose_level - 0 - Don't print anything.
• 1 - Print intro, connection event, disconnect event
• 2 - All of level 1, and new job (block) event if the difficulty is different from the last job
• 3 - All of level 1, and new job (block) event in all cases, result submission event.
• 4 - All of level 3, and automatic hashrate report printing */ "verbose_level" : 3,

/*

• Automatic hashrate report
• h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.
• This option has no effect if verbose_level is not 4. */ "h_print_time" : 60,

/*

• Output file
• output_file - This option will log all output to a file.

• */ "output_file" : "C:\Users\micha\Desktop\xmr-stak",

/*

• Built-in web server
• I like checking my hashrate on my phone. Don't you?
• Keep in mind that you will need to set up port forwarding on your router if you want to access it from
• outside of your home network. Ports lower than 1024 on Linux systems will require root.
• httpd_port - Port we should listen on. Default, 0, will switch off the server. */ "httpd_port" : 0,

/*

• prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?
• This setting will only be needed in 2020's. No need to worry about it now. */ "prefer_ipv4" : "true",