search

firemodels / fds

Fire Dynamics Simulator
https://pages.nist.gov/fds-smv/
Other
635 stars 613 forks source link

FDS issue wioth main.f90 and geom.f90 #12796

Open Dancwr2911 opened 4 months ago

Dancwr2911 commented 4 months ago

I am with uni and using FDS 6.7.5 The error I get here is:

forrtl: severe (157): Program Exception - access violation Image PC Routine Line Source fds.exe 00007FF6533E8449 COMPLEXGEOMETRY 12943 geom.f90 fds.exe 00007FF6533F25F4 Unknown Unknown Unknown fds.exe 00007FF65311062B MAIN__ 779 main.f90 fds.exe 00007FF6530CF09E Unknown Unknown Unknown fds.exe 00007FF653A66664 Unknown Unknown Unknown KERNEL32.DLL 00007FFAF595257D Unknown Unknown Unknown ntdll.dll 00007FFAF738AA58 Unknown Unknown Unknown

It is not allowing me to attach so here is my code:

Title

&HEAD CHID='assignment_fire', TITLE='assignment_fire' /

Mesh

&MESH XB= 0.0, 70.0, 0.0, 50.0, 0.0, 9.0, IJK= 280, 200, 36 /

Time

&TIME T_END=180. / DT=0.1

Boundary Conditions

Fire properties

&REAC FUEL = 'PROPANE', SOOT_YIELD=0.02

&SURF ID='FIRE', RAMP_Q='tsquared', HRRPUA=168.8, COLOR='RED' / &RAMP ID='tsquared', T= 0.0, F=0.0000 / &RAMP ID='tsquared', T= 10.0, F=0.0278 / &RAMP ID='tsquared', T= 20.0, F=0.1111 / &RAMP ID='tsquared', T= 30.0, F=0.2500 / &RAMP ID='tsquared', T= 40.0, F=0.4444 / &RAMP ID='tsquared', T= 50.0, F=0.6944 / &RAMP ID='tsquared', T= 60.0, F=1.0000 /

&VENT XB= 39.5,41,14.5,16,0,0, SURF_ID='FIRE', COLOR='RED'/

Devices

&DEVC ID='CO-rest', XYZ=47,11.5,8.25, QUANTITY='FED', SPEC_ID='CARBON DIOXIDE' / &DEVC ID='CO2-rest', XYZ=47,11.5,8.25 QUANTITY='FED', SPEC_ID='CARBON MONOXIDE' / &DEVC ID='O-rest', XYZ=47,11.5,8.25, QUANTITY='FED', SPEC_ID='OXYGEN' / &DEVC ID='visibility-rest', XYZ=47,11.5,8.25, QUANTITY='VISIBILITY' / &DEVC ID='CO-lift', XYZ=50.5,23.5,8.25, QUANTITY='FED', SPEC_ID='CARBON DIOXIDE' / &DEVC ID='CO2-lift', XYZ=50.5,23.5,8.25, QUANTITY='FED', SPEC_ID='CARBON MONOXIDE' / &DEVC ID='O-lift', XYZ=50.5,23.5,8.25, QUANTITY='FED', SPEC_ID='OXYGEN' / &DEVC ID='visibility-lift', XYZ=50.5,23.5,8.25, QUANTITY='VISIBILITY' / &DEVC ID='CO-showroom', XYZ=21,40,8.25, QUANTITY='FED', SPEC_ID='CARBON DIOXIDE' / &DEVC ID='CO2-showroom', XYZ=21,40,8.25, QUANTITY='FED', SPEC_ID='CARBON MONOXIDE' / &DEVC ID='O-showroom', XYZ=21,40,8.25, QUANTITY='FED', SPEC_ID='OXYGEN' / &DEVC ID='visibility-showroom', XYZ=21,40,8.25, QUANTITY='VISIBILITY' /

Obstructions

&SURF ID='Triangle_Surface', RGB=0,255,0 / &SURF ID='RAMP_SURFACE', RGB=0,0,255 / &SURF ID='WALL', RGB=255,0,0 /

Second floor

&OBST XB=31.0, 70.0, 0.0, 2.0, 3.5, 5.5, COLOR='GREEN'/

&GEOM ID='Triangle_Extrusion', SURF_ID='Triangle_Surface', VERTS=31.0, 1.75, 3.5, 31.0, 22.0, 3.5, 70.0, 1.75, 3.5, POLY=1, 2, 3, EXTRUDE=-2.0 COLOR='GREEN' /

&GEOM ID='Outside_Wall', SURF_ID='WALL', VERTS=24.0, 15.0, 0.0, 24.0, 15.0, 3.5, 54.0, 30.0, 3.5, 54.0, 30.0, 0.0 POLY=1, 2, 3, 4, EXTRUDE=10.0 COLOR='BLACK' /

&OBST XB=25.0, 36.0, 22.0, 30.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=35.0, 53.75, 27.0, 30.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=49.0, 52.0, 23.0, 28.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=25.0, 36.0, 0.0, 30.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=0.0, 32.0, 22.0, 50.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=31.0, 42.0, 30.0, 50.0, 3.5, 5.5, COLOR='GREEN'/

Solid Walls

Building Boundaries

&OBST XB=0.0, 25.0, 21.0, 22.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=24.0, 25.0, 0.0, 22.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=42.0, 43.0, 30.0, 50.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=42.0, 54.0, 30.0, 31.0, 0.0, 9.0, COLOR='BLACK'/

Slanted wall

&OBST XB=67.4, 70.0, 6.0, 10.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=64.9, 67.5, 10.0, 14.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=62.4, 65.0, 14.0, 18.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=59.9, 62.5, 18.0, 22.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=57.4, 60.0, 22.0, 26.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=53.9, 57.5, 26.0, 30.0, 0.0, 9.0, COLOR='BLACK'/

Stairs

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=52.0, 26.0, 5.5, 54, 23, 4.25, 56, 23.5, 4.25, 54, 26.5, 5.5, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Landing', SURF_ID='RAMP_SURFACE', VERTS=54, 23, 4.25, 55, 21.5, 4.25, 57, 22, 4.25, 56, 23.5, 4.25, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=55, 21.5, 4.25, 57, 18.5, 3.0, 59, 19, 3.0, 57, 22, 4.25, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Landing', SURF_ID='RAMP_SURFACE', VERTS=57, 18.5, 3.0, 58, 17, 3.0, 60, 17.5, 3.0, 59, 19, 3.0, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=58, 17, 3.0, 60, 14, 1.75, 62, 14.5, 1.75, 60, 17.5, 3.0, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Landing', SURF_ID='RAMP_SURFACE', VERTS=60, 14, 1.75, 61, 12.5, 1.75, 63, 13, 1.75, 62, 14.5, 1.75, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=61, 12.5, 1.75, 63, 9.5, 0.5, 65, 10, 0.5, 63, 13, 1.75, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Landing', SURF_ID='RAMP_SURFACE', VERTS=63, 10, 0.5, 66, 10, 0.5, 66, 5, 0.5, 63, 5, 0.5, POLY=1, 2, 3, 4, EXTRUDE=0.25, COLOR ='RED' /

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=63, 10, 0.5, 60, 10, 0.0, 60, 5, 0.0, 63, 5, 0.5, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

Internal Walls

Restaurant

&OBST XB=47.5, 48.5, 0.0, 11.0, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=36.0, 42.0,14.5, 14, 5.5, 9.0, COLOR='BLUE'/

DIAGONALS

&MULT ID='WALL', DX=-0.5, DY=0.25, N_LOWER=0, N_UPPER=8/ &OBST XB=45.5,46.5,12.0,12.25,5.5,9.0, MULT_ID='WALL', COLOR='BLUE'/ &MULT ID='DOOR', DX=-0.5, DY=0.25, N_LOWER=0, N_UPPER=4/ &OBST XB=47.5,48.5,11.0,11.25,8,9, MULT_ID='DOOR', COLOR='BLUE'/

Studios behind Restaurant

&OBST XB=36, 35.5,5.0, 14.0, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=36.0, 34.0,5.5, 5, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=33.5, 34,5.0, 22.5, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=34.0, 25,22, 22.5, 5.5, 9.0, COLOR='BLUE'/

Gallery Section

&OBST XB=32, 42,30.0, 30.5, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=32.0, 32.5,30, 39, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=28, 32,39.0, 38.5, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=20.0, 20.5,22, 50, 5.5, 9.0, COLOR='BLUE'/

Second Enclosure

&MULT ID='WALL2', DX=-0.5, DY=-0.5, N_LOWER=0, N_UPPER=8/ &OBST XB=28.5,29,40.0,39.5,5.5,9.0, MULT_ID='WALL2', COLOR='BLUE'/ &OBST XB=24.5,25,48.0,47.5,5.5,9.0, MULT_ID='WALL2', COLOR='BLUE'/ &MULT ID='WALL3', DX=-0.25, DY=0.5, N_LOWER=0, N_UPPER=16/ &OBST XB=28.5,28.75,40.0,39.5,5.5,9, MULT_ID='WALL3', COLOR='BLUE'/ &OBST XB=24.5,25,36.0,35.5,5.5,9, MULT_ID='WALL3', COLOR='BLUE'/

&SLCF PBY = 15, QUANTITY='TEMPERATURE'/ &SLCF PBY = 15, QUANTITY='VOLUME FRACTION', SPEC_ID='CARBON DIOXIDE' / &SLCF PBY = 15, QUANTITY='VOLUME FRACTION', SPEC_ID='CARBON MONOXIDE' / &SLCF QUANTITY='VISIBILITY', PBY=15/

&TAIL /

gforney commented 4 months ago

To attach first append a .txt extension to your file

On Sat, Apr 13, 2024, 7:07 PM Dancwr2911 @.***> wrote:

I am with uni and using FDS 6.7.5 The error I get here is:

forrtl: severe (157): Program Exception - access violation Image PC Routine Line Source fds.exe 00007FF6533E8449 COMPLEXGEOMETRY 12943 geom.f90 fds.exe 00007FF6533F25F4 Unknown Unknown Unknown fds.exe 00007FF65311062B MAIN__ 779 main.f90 fds.exe 00007FF6530CF09E Unknown Unknown Unknown fds.exe 00007FF653A66664 Unknown Unknown Unknown KERNEL32.DLL 00007FFAF595257D Unknown Unknown Unknown ntdll.dll 00007FFAF738AA58 Unknown Unknown Unknown

It is not allowing me to attach so here is my code:

Title

&HEAD CHID='assignment_fire', TITLE='assignment_fire' /

Mesh

&MESH XB= 0.0, 70.0, 0.0, 50.0, 0.0, 9.0, IJK= 280, 200, 36 /

Time

&TIME T_END=180. / DT=0.1

Boundary Conditions

Fire properties

&REAC FUEL = 'PROPANE', SOOT_YIELD=0.02

&SURF ID='FIRE', RAMP_Q='tsquared', HRRPUA=168.8, COLOR='RED' / &RAMP ID='tsquared', T= 0.0, F=0.0000 / &RAMP ID='tsquared', T= 10.0, F=0.0278 / &RAMP ID='tsquared', T= 20.0, F=0.1111 / &RAMP ID='tsquared', T= 30.0, F=0.2500 / &RAMP ID='tsquared', T= 40.0, F=0.4444 / &RAMP ID='tsquared', T= 50.0, F=0.6944 / &RAMP ID='tsquared', T= 60.0, F=1.0000 /

&VENT XB= 39.5,41,14.5,16,0,0, SURF_ID='FIRE', COLOR='RED'/

Devices

&DEVC ID='CO-rest', XYZ=47,11.5,8.25, QUANTITY='FED', SPEC_ID='CARBON DIOXIDE' / &DEVC ID='CO2-rest', XYZ=47,11.5,8.25 QUANTITY='FED', SPEC_ID='CARBON MONOXIDE' / &DEVC ID='O-rest', XYZ=47,11.5,8.25, QUANTITY='FED', SPEC_ID='OXYGEN' / &DEVC ID='visibility-rest', XYZ=47,11.5,8.25, QUANTITY='VISIBILITY' / &DEVC ID='CO-lift', XYZ=50.5,23.5,8.25, QUANTITY='FED', SPEC_ID='CARBON DIOXIDE' / &DEVC ID='CO2-lift', XYZ=50.5,23.5,8.25, QUANTITY='FED', SPEC_ID='CARBON MONOXIDE' / &DEVC ID='O-lift', XYZ=50.5,23.5,8.25, QUANTITY='FED', SPEC_ID='OXYGEN' / &DEVC ID='visibility-lift', XYZ=50.5,23.5,8.25, QUANTITY='VISIBILITY' / &DEVC ID='CO-showroom', XYZ=21,40,8.25, QUANTITY='FED', SPEC_ID='CARBON DIOXIDE' / &DEVC ID='CO2-showroom', XYZ=21,40,8.25, QUANTITY='FED', SPEC_ID='CARBON MONOXIDE' / &DEVC ID='O-showroom', XYZ=21,40,8.25, QUANTITY='FED', SPEC_ID='OXYGEN' / &DEVC ID='visibility-showroom', XYZ=21,40,8.25, QUANTITY='VISIBILITY' /

Obstructions

&SURF ID='Triangle_Surface', RGB=0,255,0 / &SURF ID='RAMP_SURFACE', RGB=0,0,255 / &SURF ID='WALL', RGB=255,0,0 /

Second floor

&OBST XB=31.0, 70.0, 0.0, 2.0, 3.5, 5.5, COLOR='GREEN'/

&GEOM ID='Triangle_Extrusion', SURF_ID='Triangle_Surface', VERTS=31.0, 1.75, 3.5, 31.0, 22.0, 3.5, 70.0, 1.75, 3.5, POLY=1, 2, 3, EXTRUDE=-2.0 COLOR='GREEN' /

&GEOM ID='Outside_Wall', SURF_ID='WALL', VERTS=24.0, 15.0, 0.0, 24.0, 15.0, 3.5, 54.0, 30.0, 3.5, 54.0, 30.0, 0.0 POLY=1, 2, 3, 4, EXTRUDE=10.0 COLOR='BLACK' /

&OBST XB=25.0, 36.0, 22.0, 30.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=35.0, 53.75, 27.0, 30.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=49.0, 52.0, 23.0, 28.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=25.0, 36.0, 0.0, 30.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=0.0, 32.0, 22.0, 50.0, 3.5, 5.5, COLOR='GREEN'/ &OBST XB=31.0, 42.0, 30.0, 50.0, 3.5, 5.5, COLOR='GREEN'/

Solid Walls

Building Boundaries

&OBST XB=0.0, 25.0, 21.0, 22.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=24.0, 25.0, 0.0, 22.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=42.0, 43.0, 30.0, 50.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=42.0, 54.0, 30.0, 31.0, 0.0, 9.0, COLOR='BLACK'/

Slanted wall

&OBST XB=67.4, 70.0, 6.0, 10.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=64.9, 67.5, 10.0, 14.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=62.4, 65.0, 14.0, 18.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=59.9, 62.5, 18.0, 22.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=57.4, 60.0, 22.0, 26.0, 0.0, 9.0, COLOR='BLACK'/ &OBST XB=53.9, 57.5, 26.0, 30.0, 0.0, 9.0, COLOR='BLACK'/

Stairs

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=52.0, 26.0, 5.5, 54, 23, 4.25, 56, 23.5, 4.25, 54, 26.5, 5.5, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Landing', SURF_ID='RAMP_SURFACE', VERTS=54, 23, 4.25, 55, 21.5, 4.25, 57, 22, 4.25, 56, 23.5, 4.25, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=55, 21.5, 4.25, 57, 18.5, 3.0, 59, 19, 3.0, 57, 22, 4.25, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Landing', SURF_ID='RAMP_SURFACE', VERTS=57, 18.5, 3.0, 58, 17, 3.0, 60, 17.5, 3.0, 59, 19, 3.0, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=58, 17, 3.0, 60, 14, 1.75, 62, 14.5, 1.75, 60, 17.5, 3.0, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Landing', SURF_ID='RAMP_SURFACE', VERTS=60, 14, 1.75, 61, 12.5, 1.75, 63, 13, 1.75, 62, 14.5, 1.75, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=61, 12.5, 1.75, 63, 9.5, 0.5, 65, 10, 0.5, 63, 13, 1.75, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

&GEOM ID='Landing', SURF_ID='RAMP_SURFACE', VERTS=63, 10, 0.5, 66, 10, 0.5, 66, 5, 0.5, 63, 5, 0.5, POLY=1, 2, 3, 4, EXTRUDE=0.25, COLOR ='RED' /

&GEOM ID='Ramp', SURF_ID='RAMP_SURFACE', VERTS=63, 10, 0.5, 60, 10, 0.0, 60, 5, 0.0, 63, 5, 0.5, POLY=1, 2, 3, 4, EXTRUDE=-0.25, COLOR ='RED' /

Internal Walls

Restaurant

&OBST XB=47.5, 48.5, 0.0, 11.0, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=36.0, 42.0,14.5, 14, 5.5, 9.0, COLOR='BLUE'/

DIAGONALS

&MULT ID='WALL', DX=-0.5, DY=0.25, N_LOWER=0, N_UPPER=8/ &OBST XB=45.5,46.5,12.0,12.25,5.5,9.0, MULT_ID='WALL', COLOR='BLUE'/ &MULT ID='DOOR', DX=-0.5, DY=0.25, N_LOWER=0, N_UPPER=4/ &OBST XB=47.5,48.5,11.0,11.25,8,9, MULT_ID='DOOR', COLOR='BLUE'/

Studios behind Restaurant

&OBST XB=36, 35.5,5.0, 14.0, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=36.0, 34.0,5.5, 5, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=33.5, 34,5.0, 22.5, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=34.0, 25,22, 22.5, 5.5, 9.0, COLOR='BLUE'/

Gallery Section

&OBST XB=32, 42,30.0, 30.5, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=32.0, 32.5,30, 39, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=28, 32,39.0, 38.5, 5.5, 9.0, COLOR='BLUE'/ &OBST XB=20.0, 20.5,22, 50, 5.5, 9.0, COLOR='BLUE'/

Second Enclosure

&MULT ID='WALL2', DX=-0.5, DY=-0.5, N_LOWER=0, N_UPPER=8/ &OBST XB=28.5,29,40.0,39.5,5.5,9.0, MULT_ID='WALL2', COLOR='BLUE'/ &OBST XB=24.5,25,48.0,47.5,5.5,9.0, MULT_ID='WALL2', COLOR='BLUE'/ &MULT ID='WALL3', DX=-0.25, DY=0.5, N_LOWER=0, N_UPPER=16/ &OBST XB=28.5,28.75,40.0,39.5,5.5,9, MULT_ID='WALL3', COLOR='BLUE'/ &OBST XB=24.5,25,36.0,35.5,5.5,9, MULT_ID='WALL3', COLOR='BLUE'/

&SLCF PBY = 15, QUANTITY='TEMPERATURE'/ &SLCF PBY = 15, QUANTITY='VOLUME FRACTION', SPEC_ID='CARBON DIOXIDE' / &SLCF PBY = 15, QUANTITY='VOLUME FRACTION', SPEC_ID='CARBON MONOXIDE' / &SLCF QUANTITY='VISIBILITY', PBY=15/

&TAIL /

— Reply to this email directly, view it on GitHub https://github.com/firemodels/fds/issues/12796, or unsubscribe https://github.com/notifications/unsubscribe-auth/AC6UCRS5UZ2EJJATHIJ3LZTY5G3BZAVCNFSM6AAAAABGFZ5KNGVHI2DSMVQWIX3LMV43ASLTON2WKOZSGI2DCOBRGE2DGOA . You are receiving this because you are subscribed to this thread.Message ID: @.***>

Dancwr2911 commented 4 months ago

#Title.txt

drjfloyd commented 4 months ago

first try your case with the current release

Dancwr2911 commented 4 months ago

tried and no luck

marcosvanella commented 4 months ago

Thank you @Dancwr2911, I'll try the case. You have a single 2 million cell mesh, split your domain in 100k+ cell meshes. Otherwise, the ULMAT Poisson solver used with geom will use tens of Gigabytes on the factorization matrix.

From: Dancwr2911 @.> Sent: Saturday, April 13, 2024 08:29 PM To: firemodels/fds @.> Cc: Subscribed @.***> Subject: Re: [firemodels/fds] FDS issue wioth main.f90 and geom.f90 (Issue #12796)

tried and no luck

— Reply to this email directly, view it on GitHubhttps://github.com/firemodels/fds/issues/12796#issuecomment-2053818865, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABY23VKY3YPVREG4IBOM2DTY5HEUZAVCNFSM6AAAAABGFZ5KNGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJTHAYTQOBWGU. You are receiving this because you are subscribed to this thread.Message ID: @.***>

marcosvanella commented 4 months ago

@Dancwr2911 swap your single mesh by this one:

&MULT ID='MyMult', DX=17.5, DY=12.5, I_UPPER=3, J_UPPER=3 / &MESH XB= 0.0, 17.5, 0.0, 12.5, 0.0, 9.0, IJK= 70, 50, 36, MULT_ID='MyMult' /

Note you will have to run the case with 16 cores. A couple of things we need to work on:

obscureed commented 1 month ago

I am not associated with NIST or FDS developers, so you are welcome to prioritize the advice from the real experts. I took a quick look at your model and can offer a few comments: • FDS 6.7.5 is old (released 2020). As @drjfloyd said, use a recent release, specifically 6.9.1. It's not a difficult installation process (in my experience). • Having said that, beta features bring complications. If you can proceed without them, you are more likely to make progress. • Your case runs (slowly) in FDS6.9.1 when I remove all the &GEOM commands. (Actually, to my surprise, it runs slowly with the &GEOM commands as well, needing only 10GB or so of RAM.) • If you decompose the mesh into several chunks, this brings the opportunity to reduce the cell count. You have several enclosed spaces that are not connected to the fire compartment. (And they have no other influence from the fire compartment, because you have adiabatic walls and no conduction.) These are presumably not useful parts of your model, so you can assemble &MESH blocks that don't fill these parts of space. • Where there are still irrelevant enclosed spaces in the model (for example, on the other side of a stair-stepped angled wall), I would generally try to fill them in. Solid blocks of &OBST take less computational effort than idle regions of fluid, and have no potential to cause instability. Actually, enclosed fluid with not even slight heating from conduction should have zero flow, so perhaps instability is not a risk in this case. (FDS is better than many CFD codes at letting stagnant fluid do nothing. Usually, the risk with enclosed fluid spaces is that they will get some heat input from conduction, the air will expand and the pressure will zoom up.) • Your fire compartment is also fully enclosed -- walls all around. The fire is not large compared to the space, but you will find that pressure builds up inside this enclosed space, almost certainly unrealistically. It will help stability (and realism) if you add a small amount of leakage somewhere. (My preferred method for this would be a small patch of "&VENT SURF_ID='OPEN', XB=..." on the exterior boundary, probably at least 2 pixels 2 pixels. No need to involve the HVAC solver.) • See the FDS User Guide about the default thermal boundary conditions for walls -- search for 'INERT'. This is almost never what you want; FDS declines to offer you a more realistic option, because it varies so much from case to case. You can see concrete and plasterboard, for example in the Bittern_Sprinkler_Experiments cases in the Validation examples. • For an exploratory model, I would add a lot* more postprocessing. (For example: slices of several quantities, including velocity vectors, at several heights and through a few vertical slices. The fire is unlikely to get close to underventilation, but you should prove that to yourself with a slice of oxygen mass fraction through the fire bed. Whenever I see a doorway in a model, I want to know the flowrate through it -- not easy for an angled doorway, but you'll find a way.) • I wouldn't use red color for geometry next to a red fire bed. • I don't know what you're hoping for when you specify a species (SPEC_ID=...) in "&DEVC QUANTITY='FED' ...". I suspect this is an example where FDS lets you specify something but does not use that input at all. • Talking of which, your text "DT=0.1" early in the input file does nothing -- it is silently interpreted as a comment. Anything outside of a known command "&XXXX ... /" is a comment. In my view, this is a dangerous syntax, but it's probably too well embedded to challenge. A good way to start a comment (including at the end of a line inside a multiline command) is with "!".

Good luck! Ed