Originally posted by **nsarifds** April 15, 2024
Hello everyone, I have posted some pictures to describe my problem. At image 1 you can see all of my cable targets setup in Pyrosim. Image 2 is the beginning of the simulation, all my obstructions have disappeared. Image 3 is a slice of the temperature, there the obstructions are visible through the different temperature gradient. At this temperature these obstructions should have ignited. Image 4 is the HRR in the simulation volume, it is equal to the fire's HRR, therefore there was no ignition of the cables. Any ideas what is happening? This is the FDS version just before the release of 6.9.0.
![1](https://github.com/firemodels/fds/assets/161325698/8c839475-dbf7-4ac7-bf97-511a2b7fc63f)
![2](https://github.com/firemodels/fds/assets/161325698/278992d3-b9e8-46a6-bb3f-e7258cef150d)
![3](https://github.com/firemodels/fds/assets/161325698/9f756a06-10b2-4d18-a936-32a6eeed8f4c)
![4](https://github.com/firemodels/fds/assets/161325698/04b26899-94a9-468e-8135-846d788951ec)
Discussed in https://github.com/firemodels/fds/discussions/12800