Closed cxp484 closed 3 months ago
Let me check.
On Fri, Jun 7, 2024 at 6:27 PM Randy McDermott @.***> wrote:
@cxp484 https://github.com/cxp484 Please have a look at this case on blaze ignition_delay_T1200K_Phi0p6, it is giving a CVODE error. Please check if this is critical or a warning. If it is ok and just a warning we need to mark it as such. Thanks
— Reply to this email directly, view it on GitHub https://github.com/firemodels/fds/pull/13040#issuecomment-2155650954, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHF23ERY2CIBO76OFZZQIFTZGIXTTAVCNFSM6AAAAABI7KCDPGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNJVGY2TAOJVGQ . You are receiving this because you were mentioned.Message ID: @.***>
I just tried after taking latest. The release solver. (Impi_intel_linux) did run successfully without warning in blaze for T1200 and Phi 0.6 . @rmcdermo can you check again if you still see the problem?
OK, I'll double check.
@rmcdermo I can see the warning in debug solver. I will change the ramp and submit the changes.
@cxp484 I just tried rerunning the cases on blaze with the latest source using impi_intel_linux. When I tail *.err
I see this.
Let me run the cases in blaze. I will modify the ramps for the files which gives warning message.
@cxp484 Sorry, with latest, I now get this.
@cxp484 Please have a look at this case on blaze
ignition_delay_T1200K_Phi0p6
, it is giving a CVODE error. Please check if this is critical or a warning. If it is ok and just a warning we need to mark it as such. Thanks