fixelsan
commented
2 years ago can you provide some pictures?
Closed calaerial closed 1 year ago
fixelsan
commented
2 years ago can you provide some pictures?
calaerial
commented
1 year ago Hello Felix,
Of course, i'm away this evening but should be able to open up the 3DO tomorrow afternoon and send through some pictures.
It may be that there are reasons why this method are less than optimal for some, but it certainly seems to be working for me :)
Kind regards,
Mark
On Sat, 12 Nov 2022 at 19:20, Felix Lazarev @.***> wrote:
can you provide some pictures?
— Reply to this email directly, view it on GitHub https://github.com/fixelsan/3do-ode-firmware/issues/7#issuecomment-1312554657, or unsubscribe https://github.com/notifications/unsubscribe-auth/ASAHMTN4KMYP7ZLBVJDJPKDWH7UXTANCNFSM6AAAAAAQEIYHDY . You are receiving this because you authored the thread.Message ID: @.***>
calaerial
commented
1 year ago Photos attached
Kind regards,
Mark
20221127104847.jpg <https://drive.google.com/file/d/11aP2iywlUuAdpHtLlYutSh2GoqlUvlw/view?usp=drive_web>
20221127_104906.jpg https://drive.google.com/file/d/11PB6ndMIpdWvH_amLFJFSZDSKGvqeElU/view?usp=drive_web
20221127_104917.jpg https://drive.google.com/file/d/11HxFhbtK9E8BiUv6vRWZLsWBMpBKB7hX/view?usp=drive_web
On Fri, 25 Nov 2022 at 10:00, Calaerial @.***> wrote:
Hello Felix,
Of course, i'm away this evening but should be able to open up the 3DO tomorrow afternoon and send through some pictures.
It may be that there are reasons why this method are less than optimal for some, but it certainly seems to be working for me :)
Kind regards,
Mark
On Sat, 12 Nov 2022 at 19:20, Felix Lazarev @.***> wrote:
can you provide some pictures?
— Reply to this email directly, view it on GitHub https://github.com/fixelsan/3do-ode-firmware/issues/7#issuecomment-1312554657, or unsubscribe https://github.com/notifications/unsubscribe-auth/ASAHMTN4KMYP7ZLBVJDJPKDWH7UXTANCNFSM6AAAAAAQEIYHDY . You are receiving this because you authored the thread.Message ID: @.***>
Hello,
I have been playing with my new ODE for a week now and have come to the view that (Unless Fixel has some suggestion as to why this shouldnt be done) the suggested installation location for the ODE may not be the easiest/best one if looking for a stock appearance.
The suggested location is perfectly suitable, but requires the loss of the entire CD assembly and of course the front facia, necessitating either gluing it to the front of the chassis or using a 3D printed replacement.
I have found that a more stock appearance can be obtained by leaving the entire CD assembly as it is, feeding the ribbon cables up the back and simply placing the ODE on top of the back of the CD tray. This also means you dont need to find a place to store the CD assembly if you wish to keep it, it just stays where it is.
There is sufficient height available that the only item which needs to be removed is the RF shielding. A small hole could be cut in that to allow the USB port to pop through if needed.
Just a suggestion. May be that others have also gone this route, perhaps might be worth adding to the installation instructions as an option.