Open silviudc opened 10 months ago
It might work. Let me know if you try it. There is no risk of harm.
I have it ordered, will report back once I try it :)
Just to confirm that it works but I see the following only: Would it be possible to add/update the following:
JKBMS FW is v14.17
Just to confirm that it works but I see the following only: Would it be possible to add/update the following:
- Would like to see toggle buttons for balance and float mode, like for charge/discharge
- Temp sensors 3 and 4 are missing, only 1 and 2 showing
JKBMS FW is v14.17
Hello,
Can you walk me through this setup? MQTT Broker finds the BMS(3), but i am not able to populate any of the info
I've added the other 2 temperature sensors.
@silviudc What is float mode? Can you post a screenshot of the app screen with that button?
@fl4p It's called Vol. Cell RFV(V) in the app: RFV = requested float voltage 2nd from the top:
There is a Function Switch for it on the 3rd screen of the app to toggle this function:
@fl4p The same problem here. It would be perfect to have a "Float Mode" switch in Home Assistant. All the other settings work perfectly!
Maybe it will be useful for someone. Made a small patch that adds a "Float Charge" switch for the JKBMS PBx series. Personally, I need this switch for correct automation in Home Assistant. Use only at your own risk, since I do not know how this change will work for other JK BMS boards. My BMS is PB2A16S20P v15.24
Is the Smart BMS JK-PB2A16S-20P with Active Balancer supported by this integration? This is the new model that talks to inverters. https://www.jkbms.com/product/jk-pb2a16s20p-jk-pb2a16s-20p/