///I2C address definations.
/// Adafruit breakout board have two jumppers to set unique
/// address for each board ( in case there is more than one in Your system)
/// base address is 0x40, no jumpers needed)
enum t_i2caddr{
I2C_ADDR_40 = 0x40, ///< address 0x40 no jumpers required.
I2C_ADDR_41 = 0x41, ///< address 0x41 bridge A0.
I2C_ADDR_44 = 0x44, ///< address 0x44 bridge A1.
I2C_ADDR_45 = 0x45 ///< address 0x45 bridge A0 & A1.
};
16 total addresses should possible with connections to scl and sda pins. 0x40 through 0x4F. also mispelled definitions and jumpers
16 total addresses should possible with connections to scl and sda pins. 0x40 through 0x4F. also mispelled definitions and jumpers