search

flipperdevices / flipperzero-firmware

Flipper Zero firmware source code
https://flipperzero.one
GNU General Public License v3.0
12.77k stars 2.72k forks source link

Fix saving selected settings in Sub-GHz #2609

Open krolchonok opened 1 year ago

krolchonok commented 1 year ago

Describe the bug.

When you select the settings in "Config" in Read - Sub-GHz and then exit or view the signal information, the "Modulation" setting switches to the standard one.

Reproduction

EN (ya.translate):

  1. Log in to SubGhz - read
  2. Catch the signal (Any)
  3. After the capture, go to Config
  4. Change the modulation to another
  5. Go back
  6. Open the signal information
  7. Go back to the scan menu

Rus:

  1. Зайти в SubGhz - read
  2. Поймать сигнал (Любой)
  3. После поимки зайти в Config
  4. Поменять модуляцию на другую
  5. Вернуться назад
  6. Открыть информацию о сигнале
  7. Вернутся обратно в меню сканирования

Target

No response

Logs

No response

Anything else?

No response

doomwastaken commented 1 year ago

Not entirely certain that it is a bug, since you are opening a signal with different modulation. I will ask around and get back to you

krolchonok commented 1 year ago

Thank you. The scenario I see is to find a pair of signals on one modulation, switch to another modulation, continue searching, view information about the old signal without stopping the search on the new modulation.

paulvantuyl commented 1 year ago

I'm having a similar problem where I adjust the config, go back, scan, and then can't save results. Also, changing the config does not save – it defaults back to 433.92 each time.