Open landgrant opened 2 years ago
Were you able to find an answer here ?
Unfortunately not. I ended up buying single boards off of eBay for one project, and separate brushless controllers for another
On Sun, Apr 24, 2022 at 10:43 PM Robin @.***> wrote:
Were you able to find an answer here ?
— Reply to this email directly, view it on GitHub https://github.com/flo199213/Hoverboard-Firmware-Hack-Gen2/issues/21#issuecomment-1108007032, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABPLUZQZY2XDULE7FURK5DLVGYBDJANCNFSM5MPXAFNA . You are receiving this because you authored the thread.Message ID: @.***>
--
*ADAM BENNERPRESIDENT 614 / 398-1622 @.
WEB http://landgrantbrewing.com/ / FACEBOOK http://www.facebook.com/landgrantbrewingco / TWITTER https://twitter.com/landgrantbeer
I'm working on the same Motherboards, and this can help you. It is also helpful to know which Processor you have on it. mine was MM32SPIN05PF on a YS-SXT-V4.2 A & B. i could flash the Motherboard with Keil, but I couldn't do it with the ST-Link. Anyway in the Firmware here they used an ESP32 microcontroller to with an Autodetect Program.
here is the link https://github.com/AILIFE4798/Hoverboard-Firmware-Hack-Gen2.x-MM32
I recently purchased a HOVER-1 CHROME hoverboard. Inside it had the split boards similar to the main post but has a different processor I have not seen. I cannot get the board to connect on ST-LINK, and not sure if the pinout is the same as others have seen with their split boards. The main board is labeled YS-SXT-4.2 A, the slave is YS-SXT-4.2 B. I installed the MDK ARM tool from KEIL, but STM32Cube and ST-LINK still have no luck connecting.
https://imgur.com/a/8aWoPEG
I haven't seen anything online with info, but wanted to see if anyone had any tips.