search

flpvn / wittytwitter

Automatically exported from code.google.com/p/wittytwitter
0 stars 0 forks source link

Witty registers with Snarl but no notifications are shown #188

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
I installed snarl and saw that Witty uses it. When I start witty it
registers with Snarl but no notifications are shown from there on. When I
close Witty it un-registers itself from snarl correctly.
Other snarl applications are working (FireSnarl, i.e.).

Original issue reported on code.google.com by jose.junior on 16 Jan 2009 at 6:13

GoogleCodeExporter commented 9 years ago 
Did you install the Lemon during the Snarl setup too? If so you find in 
K23productions->melon->Lemon

Could you start it, then try to get some notifications (they are only shown if 
Witty is _not_ the active window) 
and give me the output you get within Lemon? Thanks

Original comment by PidginSn...@gmail.com on 17 Jan 2009 at 8:39

GoogleCodeExporter commented 9 years ago 
I sent witty to the tray and posted some updated on the twitter home. That 
usually
pops a notification. Also, when I start Witty it shows a summary of messages 
received
that are not being showed. To test, I quit snarl and started witty again and all
bubble notifications showed up.

Clear startup of Snarl + Witty right after:

[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_CONFIG_WINDOW_2 id=0 lngdata2=00000000
[snarl] TApplicationRoster.FindByWindow(): window 00000000 not found
[snarl] TApp.bInit(): config section for 'app.Witty' already in config
[snarl] TApp.FindAlert(): 'Witty' has no alerts
[snarl] TApp.AddAlert(): config section for 'app.Witty' found
[snarl] TApp.AddAlert(): alert 'app.Witty' found
[snarl] TPackedData.Add(): name='enabled' data='1'
[snarl] TPackedData.Add(): name='style' data=''
[snarl] TPackedData.Add(): name='duration' data='-1'
[snarl] TPackedData.Add(): name='use_style' data='0'
[snarl] TPackedData.Add(): name='position' data='-1'
[snarl] TPackedData.Add(): name='suppression' data='0'
[snarl] Tapplication.uAdd(): app ignored SNARL_ASK_APPLET_VER
[snarl] uCopyData(): dwData=2 hWndFrom=001D0806
[snarl] uDoSnarlReq(): cmd=unknown: 32 id=0 lngdata2=00000000
[snarl] CSnarlWindow.Create(): style_to_use=''
[snarl] CSnarlWindow.Create(): style/scheme not found, using default 
'halon/flat'...
[snarl] g_gdipGetStringHeight(): result=0 extents=182,1771x14,1875 lines=1
[snarl] TNotificationRoster.uIsFreeSpace(): [1178,794;1436,866] is okay
[snarl] TNotificationRoster.Add(): placing at 1178,794
[snarl] TApplicationRoster.Add('Witty' 0x00000000 0x00000000) returned 00000000
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_ALERT id=0 lngdata2=00000000
[snarl] gfRegisterAlert('Witty' 'New tweet' #00000000)
[snarl] TApp.AddAlert(): config section for 'app.Witty' found
[snarl] TApp.AddAlert(): alert 'app.Witty' found
[snarl] TPackedData.Add(): name='enabled' data='1'
[snarl] TPackedData.Add(): name='style' data=''
[snarl] TPackedData.Add(): name='duration' data='0'
[snarl] TPackedData.Add(): name='use_style' data='1'
[snarl] TPackedData.Add(): name='position' data='-1'
[snarl] TPackedData.Add(): name='suppression' data='0'
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_ALERT id=0 lngdata2=00000000
[snarl] gfRegisterAlert('Witty' 'New tweets summarized' #00000000)
[snarl] TApp.AddAlert(): config section for 'app.Witty' found
[snarl] TApp.AddAlert(): alert 'app.Witty' found
[snarl] TPackedData.Add(): name='enabled' data='1'
[snarl] TPackedData.Add(): name='style' data=''
[snarl] TPackedData.Add(): name='duration' data='0'
[snarl] TPackedData.Add(): name='use_style' data='1'
[snarl] TPackedData.Add(): name='position' data='-1'
[snarl] TPackedData.Add(): name='suppression' data='0'
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_ALERT id=0 lngdata2=00000000
[snarl] gfRegisterAlert('Witty' 'New reply' #00000000)
[snarl] TApp.AddAlert(): config section for 'app.Witty' found
[snarl] TApp.AddAlert(): alert 'app.Witty' found
[snarl] TPackedData.Add(): name='enabled' data='1'
[snarl] TPackedData.Add(): name='style' data=''
[snarl] TPackedData.Add(): name='duration' data='0'
[snarl] TPackedData.Add(): name='use_style' data='1'
[snarl] TPackedData.Add(): name='position' data='-1'
[snarl] TPackedData.Add(): name='suppression' data='0'
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_ALERT id=0 lngdata2=00000000
[snarl] gfRegisterAlert('Witty' 'New direct message' #00000000)
[snarl] TApp.AddAlert(): config section for 'app.Witty' found
[snarl] TApp.AddAlert(): alert 'app.Witty' found
[snarl] TPackedData.Add(): name='enabled' data='1'
[snarl] TPackedData.Add(): name='style' data=''
[snarl] TPackedData.Add(): name='duration' data='0'
[snarl] TPackedData.Add(): name='use_style' data='1'
[snarl] TPackedData.Add(): name='position' data='-1'
[snarl] TPackedData.Add(): name='suppression' data='0'
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=unknown: 32 id=0 lngdata2=00000000
[snarl] uDoCmdEx(): [SNARL_EX_SHOW] hWndFrom not provided - can't determine 
sender
[snarl] CSnarlWindow.uNotify(): sending #33 to hWnd=001D0806 msg=00000555 
id=0000027A

No notifications whatsoever (only the 'registered correctly' one). 
Bellow is the Lemon output after closing witty and running it again:

[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_CONFIG_WINDOW_2 id=0 lngdata2=00000000
[snarl] TApplicationRoster.uAdd(): config window already registered
[snarl] TApplicationRoster.Add('Witty' 0x00000000 0x00000000) returned 8000000C
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_ALERT id=0 lngdata2=00000000
[snarl] gfRegisterAlert('Witty' 'New tweet' #00000000)
[snarl] TApp.AddAlert(): alert class 'New tweet' already exists
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_ALERT id=0 lngdata2=00000000
[snarl] gfRegisterAlert('Witty' 'New tweets summarized' #00000000)
[snarl] TApp.AddAlert(): alert class 'New tweets summarized' already exists
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_ALERT id=0 lngdata2=00000000
[snarl] gfRegisterAlert('Witty' 'New reply' #00000000)
[snarl] TApp.AddAlert(): alert class 'New reply' already exists
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=SNARL_REGISTER_ALERT id=0 lngdata2=00000000
[snarl] gfRegisterAlert('Witty' 'New direct message' #00000000)
[snarl] TApp.AddAlert(): alert class 'New direct message' already exists
[snarl] uCopyData(): dwData=2 hWndFrom=00000000
[snarl] uDoSnarlReq(): cmd=unknown: 32 id=0 lngdata2=00000000
[snarl] uDoCmdEx(): [SNARL_EX_SHOW] hWndFrom not provided - can't determine 
sender

Original comment by jose.junior on 18 Jan 2009 at 2:06

GoogleCodeExporter commented 9 years ago 
OK, I think I see the problem (it's the sender which is #000000 which it 
shouldn't be
- just trying to debug and finding the cause nwo

Original comment by PidginSn...@gmail.com on 19 Jan 2009 at 8:21

GoogleCodeExporter commented 9 years ago 
Hi, having digged very deep into the source I am not sure why it is working for 
me
and not for you.

Could you tell me your setup (most important the Operating version and if 32/64 
bit
and the Snarl version you are using)

Many thanks for your help and patience

Original comment by PidginSn...@gmail.com on 19 Jan 2009 at 11:18

GoogleCodeExporter commented 9 years ago 
Found a much cleaner way to interact with Snarl (plus the bonux I could now 
react on
clicks on notifications - now I have to think in which way I would like to 
react ;))
I made a new binary and attached it to this post. Could you please download and
extract the attachment to this post and try it with this version? Thanks

Original comment by PidginSn...@gmail.com on 19 Jan 2009 at 3:21

Attachments:

GoogleCodeExporter commented 9 years ago 
Worked like a charm! Nice and pretty snarltifications are a-ok now.

Original comment by jose.junior on 20 Jan 2009 at 10:49

GoogleCodeExporter commented 9 years ago 
So please someone with check in permission apply the attached patch to resolve 
this
issue :)

@jose.junior - thanks for reporting - am I right that you are using a 64 bit 
Windows...?

Original comment by PidginSn...@gmail.com on 21 Jan 2009 at 8:02

Attachments:

GoogleCodeExporter commented 9 years ago 
Applied patch, updated nightly build. Thanks!!! Please report back if the new 
build 
is working.

Original comment by jongallo...@gmail.com on 21 Jan 2009 at 9:05

GoogleCodeExporter commented 9 years ago 
Yes, using vista 64 bit and xp 32. Worked on both btw.

Original comment by jose.junior on 21 Jan 2009 at 10:18

GoogleCodeExporter commented 9 years ago 
Verified by Jose

Original comment by jongallo...@gmail.com on 21 Jan 2009 at 7:29

GoogleCodeExporter commented 9 years ago 
Additionally verified by me :)

Original comment by PidginSn...@gmail.com on 22 Jan 2009 at 7:42