Closed crazyfx1 closed 3 years ago
Same problem accures by using an X-Box controller. The lever can go to full TO-GA and snaps to FLEX but cant be put to CL. As a result the PFD flashes "LVR CLB".
And I will add that when you succeed in selecting CL, it comes back by itself in A / THR position or in FLX or TOGA
yeah i noticed this too last 3 days
Detents Calibration in "flyPad" Option page may be solution for this.
Detents Calibration in "flyPad" Option page may be solution for this.
hi, when put throttle on climb the other throttle is delayed how i fix that , they dont move both to climb
Detents Calibration in "flyPad" Option page may be solution for this.
Yes you can calibrate to fix it. But I believe it should work for keyboard without calibration .
thank you ill try
Search also closed issues for keywords we had one with a similar issue where throttles have been misaligned.
yeah that will help , thank you
I have the same issue with a controller since recently and i increase/decrease thurst with two buttons. I, too, cannot select Climb Thrust directly and have to select a slightly lower detend (exactly like the image shown above. But I have an additional issue: when I lock the levers with my mouse in the exact CL position it locks in as it should but the plane does not recognize it as CL but it just says MAN THR (I believe) as if I pushed them to MCT. So I either get a "LVR CLB" or "MAN THR" but I cannot get it into a green "SPEED" anymore and its mildly annoying
See #5482, closing now.
Aircraft Version
Development
Build info
Describe the bug
I want to select "CL" on the thrust lever with the keyboard keys (default F2 and F3). The lever jumps right over CL, it's not possible to select it.
Expected behavior
The lever should snap to CL and then go further.
Steps to reproduce
References (optional)
Video: https://streamable.com/hiyqbb
Additional info (optional)
It works in the Asobo A320neo.
Discord Username (optional)
No response