search

flyduino / kissfc-tx-lua-scripts

Kiss Lua configuration script for taranis
GNU General Public License v3.0
40 stars 14 forks source link

Xlite PID values flashing and unchangable #37

Open bosstin36 opened 6 years ago

bosstin36 commented 6 years ago

I'm having an odd issue with the X-Lite lua scripts...

Everything is wired correctly with hardware as below. Telemetry connects fine, but the lua screen shows a flashing "no telemetry" however if you watch you can see the PID values show up and then disappear every few seconds: https://youtu.be/PsLOTpVktk8

You can't change them, but they are almost there!

The same receiver works fine running on a betaflight board with bf lua scripts.

Kiss FC (v1) Running RC34c (latest) X4RSB running NONEU_170322 (latest) Xlite running opentx 2.2.2RC5 (latest) Unify race pro

lichtl commented 6 years ago

How far was the Xlite away from the Quad? I know there are issues when the quad is next to the RX (causing telemetry uplink failures). Try a distance from 1+ meter.

bosstin36 commented 6 years ago

The Xlite does often lose telemetry when close to the quad. However the issue is still there with a solid telemetry link at 20 meters away.

lichtl commented 6 years ago

hmm. Is normal telemetry working without any issues (constantly updates) Test being done with LBT X-Lite and the only changes on the LUA are basically the adjustments related to the missing buttons. Since I don't own a X-Lite myself I have to check with a Friend about upgrading to NONeu