Tydom2Mqtt home assistant http 401 error

[Aurel-rpi]

Hello ,

First of all, thank you for your work.

I am writing because I need your help. I configured the tydom2mqtt extension and the connection is made correctly with my Tydom 1.0 box. I see in the logs that my calybox is found but no device appears in the mqtt integration as if no device was created by tydom2mqtt.

I have this error before establishing the connection "Error 401 authentication requested"

I can clearly see the connection in mosquitto

Can you help me identify the problem?

Thanks 😃

LogTydom2mqtt.txt

[BlacKTM1190]

Hello Do you use the latest release ? The polling have been restored in 3.4.3 for such devices. I'm not on this release yet but will try to upgrade this w-e, looking for my Tywatt and give my feedback. Another question : I see in your logs that you have set an alarm pin, is your alarm working through HA ?

[Aurel-rpi]

Yes my installation actually runs the 3.4.3 release and i can see the polling in log file. I'm interested in your feedback on this version. It seems to me that I also have a tywatt on my electrical panel but I haven't paired it yet. No I don't have an alarm working through HA, I filled in this field because I saw on forums that some users had problems leaving it empty

[fmartinou]

Hi,

That's an authentication issue to the Tydom; the credentials used must be invalid.

It's a often a pain to get these credentials.

Please see:

• the FAQ
• the home-assistant integration howto
• this tuto to get them

[neilerua973]

It works well for me after resetting the password of my tydom, by pressing the button during 15sec.