search

foldynl / QLog

Amateur radio logbook software
GNU General Public License v3.0
137 stars 18 forks source link

FT8 Contacts Not Synced to QRZ #379

Closed jmcblane closed 3 months ago

jmcblane commented 4 months ago

When FT8 Contacts are imported, either by QLog automatically or manually, they are not synced to QRZ regardless of the QRZ syncing status. Attempting to upload these contacts to QRZ just results in being told there are no new contacts to upload to QRZ.

foldynl commented 4 months ago

what is the QRZ Upload Status value for the impacted QSO(s)? Can you export one of these QSOs and send me an ADIF record?

jmcblane commented 4 months ago

I tried changing the upload status to each option and uploading to QRZ with the same result. It is like it doesn't recognize that the QSO exists in the log at all or something. Below is the ADIF record of one such QSO. Mind you, I manually changed it to Y for QRZ upload status after manually adding the contact to QRZ from the QRZ web page.

TI5VWR -06 -11 14.074 20m FT8 Luis Fernando Montalto Altamira, Guacima EJ79UX 308 Costa Rica NA 7 11 TI5 N N N N 45 20m 4864 ***@***.*** N N 14.074 N009 58.752 W084 17.520 AUBURN CA,Placer United States 3 291 CM98KW 6 N038 55.309 W121 05.378 JACOB MCBLANE CA 20240531 Y K6AVB 20240531 055100 20240531 055100 1104824977 N On Fri, 2024-05-31 at 08:18 -0700, Ladislav wrote: > what is the QRZ Upload Status value for the impacted QSO(s)? Can you > export one of these QSOs and send me an ADIF record? > — > Reply to this email directly, view it on GitHub, or unsubscribe. > You are receiving this because you authored the thread.Message ID: > ***@***.***> -- Jacob McBlane
jmcblane commented 4 months ago

Sorry for the double response, but I made a quick FT8 contact which QLog pulled in automatically, and here is the result:

KF4DGS -06 +00 21.0743 15m FT8 Standon D Lee EM63 291 United States NA 5 8 KF4 N Q N Q 100 12 3090.636389051466 N Q 1 40m EFHW Auburn, CA USA United States 3 291 CM98 6 Jacob McBlane IC-7300 179 K6AVB 20240601 025945 20240601 030045 On Fri, 2024-05-31 at 08:18 -0700, Ladislav wrote: > what is the QRZ Upload Status value for the impacted QSO(s)? Can you > export one of these QSOs and send me an ADIF record? > — > Reply to this email directly, view it on GitHub, or unsubscribe. > You are receiving this because you authored the thread.Message ID: > ***@***.***> -- Jacob McBlane
foldynl commented 4 months ago

qrzcom_qso_upload = Y means "the QSO has been uploaded to, and accepted by, the online service" ( more details in ADIF specification)

qrzcom_qso_upload = N means "do not upload the QSO to the online service" ( the same specification).

If you want to send QSO where qrzcom_qso_upload = N then use QRZ Upload dialog and enable Include QSO ....

image

If qrzcom_qso_upload is missing in ADIF or the value is empty then the QSO will be sent to QRZ.

Did you tried to upload your QSO with KF4DGS?

jmcblane commented 4 months ago

Thanks for the crash course. This confirms what I thought was going on. However; nothing I do, including the suggestions you have given, will get the software to recognize the QSO and send it to QRZ. Marking it as N and checking the box to include those doesn't work. Blank doesn't work. And it's only with QSOs imported from WSJTX, whether the program imports them automatically or if I import the ADIF manually, same problem.The QSO with KF4DGS will not sync to QRZ through QLog.JACOB MCBLANE -------- Original message --------From: Ladislav @.> Date: 6/1/24 12:45 PM (GMT-08:00) To: foldynl/QLog @.> Cc: Jacob McBlane @.>, Author @.> Subject: Re: [foldynl/QLog] FT8 Contacts Not Synced to QRZ (Issue #379) qrzcom_qso_upload = Y means "the QSO has been uploaded to, and accepted by, the online service" ( more details in ADIF specification) qrzcom_qso_upload = N means "do not upload the QSO to the online service" ( the same specification). If you want to send QSO where qrzcom_qso_upload = N then use QRZ Upload dialog and enable Include QSO .... image.png (view on web) If qrzcom_qso_upload is missing in ADIF or the value is empty then the QSO will be sent to QRZ. Did you tried to upload your QSO with KF4DGS?

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

foldynl commented 4 months ago

Jacob, I'm sorry you're having these problems, but I can't replicate your problem. I imported both QSOs into my QLog. And both QSOs can be selected for Upload to QRZ. Of course, after changing Y->N. The only problem I see is that you log one QSO with a short locator, and then the second QSO with a long locator. But it doesn't affect the choice. You just have to send the QSOs with two selection of the grid. see short video below.

jacob

jmcblane commented 3 months ago

I found the issue. I was not selecting the other shorter prefix before asking it to upload. That was my problem.I sincerely appreciate your time and effort, and maybe this will help someone else who runs into the same issue. I expected it was searching all the QSOs, and not only checking those of the grid square selected on the upload box.JACOB MCBLANE -------- Original message --------From: Ladislav @.> Date: 6/2/24 12:07 AM (GMT-08:00) To: foldynl/QLog @.> Cc: Jacob McBlane @.>, Author @.> Subject: Re: [foldynl/QLog] FT8 Contacts Not Synced to QRZ (Issue #379) Jacob, I'm sorry you're having these problems, but I can't replicate your problem. I imported both QSOs into my QLog. And both QSOs can be selected for Upload to QRZ. Of course, after changing Y->N. The only problem I see is that you log one QSO with a short locator, and then the second QSO with a long locator. But it doesn't affect the choice. You just have to send the QSOs with two selection of the grid. see short video below. jacob.gif (view on web)

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>