search

foldynl / QLog

Amateur radio logbook software
GNU General Public License v3.0
114 stars 17 forks source link

Layout - menu button ?? #408

Open OZ1CT-Ben opened 2 weeks ago

OZ1CT-Ben commented 2 weeks ago

My idea was to quick and easy change the Layout of your dashboard, if you change from "HF-Phone" and go to "QO-100" just hit the menu-button and all is change for you....also the Rig setup/rotor/.... there is space on the dashboard for it on place 1. or 2.

73" OZ1CT Ben Qlog-Layout-profile

foldynl commented 2 weeks ago

basically it's a good idea. It is necessary to improve it. It is not possible to use buttons here, because the operator can define several profiles, which would mean that the QLog layer would be full of buttons. But there is definitely a need to do something with the fact that Qlog contains several profiles that can be switched independently. I am registering a request to switch the antenna profile depending on the band and rig. And this idea could solve it. Thanks

OZ1CT-Ben commented 2 weeks ago

Is it maybe better to have a startup menu and here select where you will be active (HF-VHF) and then it start up in layout you "made" ??? Send from my mobile office.

man. 8. jul. 2024 10.16 skrev Ladislav @.***>:

basically it's a good idea. It is necessary to improve it. It is not possible to use buttons here, because the operator can define several profiles, which would mean that the QLog layer would be full of buttons. But there is definitely a need to do something with the fact that Qlog contains several profiles that can be switched independently. I am registering a request to switch the antenna profile depending on the band and rig. And this idea could solve it. Thanks

— Reply to this email directly, view it on GitHub https://github.com/foldynl/QLog/issues/408#issuecomment-2213331921, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGM6LRGHHPXHTIVDORRXRZTZLJDHBAVCNFSM6AAAAABKPSG35CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMJTGMZTCOJSGE . You are receiving this because you authored the thread.Message ID: @.***>