While fixing #15 it turned out that networks (e.g. walk and tram) can be composed are are not connected. This makes routing impossible since only one of the two can be used at the same time.
Therefore both should be connected manually to allow for
more precise routing
routing across all means of transportation
Therefore try
iterate through all tram (or bus) nodes
check if it is a station
determine which node of the walk network is closest
connect the two
Or try
load tram network including stations + walk network
While fixing #15 it turned out that networks (e.g. walk and tram) can be composed are are not connected. This makes routing impossible since only one of the two can be used at the same time.
Therefore both should be connected manually to allow for
Therefore try
Or try