search

forkineye / ESPixelStick

Firmware for the ESPixelStick
http://forkineye.com/
528 stars 169 forks source link

Quinled AE+_SD + 3x - no file management with a 32GB SD card #612

Closed gabi68 closed 1 year ago

gabi68 commented 1 year ago

--------- Instructions -------- Please provide answers directly below each section. --------- Instructions ---------

ESPixelStick Firmware Version ESPixelStick 4.0-dev - Development Release

Hardware Version QuinLed AE+_SD + 3x

Binary release or compiled yourself? Binary from Google Drive

Operating System (and version) Win 10 64bit

Web Browser (and version) Chrome 109.0.5414.75

Access Point

Describe the bug Tried to make a SD card work (save and send xlights sequences), but is not recognized therefore no management file tab . Tried 4GB, 32GB, 64GB all formatted Fat32. All pins for SD card are correct (same pins like the table posted on QuinLed website). All checked with advance mode activated.

MartinMueller2003 commented 1 year ago

Please post an image of the Admin page. It has some important info on it.

gabi68 commented 1 year ago

Here you go Admin1

gabi68 commented 1 year ago

And pins Admin2

MartinMueller2003 commented 1 year ago

I have that build on my Quinled AE Plus card and yes I have the same GPIOs and I see the file management screen just fine. Please make sure everything is properly plugged in. It is very easy to mess up the alignment of the pins on the AE Plus extension card.

gabi68 commented 1 year ago

In other words I have a board which is not working as is should. I will have another look on connections which are good since the rainbow pattern is working...

MartinMueller2003 commented 1 year ago

It is possible that the HW is bad. I myself have plugged the AE card in wrong a number of times, so I know it can happen.

MartinMueller2003 commented 1 year ago

Any update? I am not seeing this on any other boards.

MartinMueller2003 commented 1 year ago

No changes made. I suspect a bad or not compatible SD card.