search

forkineye / ESPixelStick

Firmware for the ESPixelStick
http://forkineye.com/
528 stars 169 forks source link

ESPixelStick-4.0-beta5 - Output issue WS2811 #720

Closed Noelle88 closed 3 months ago

Noelle88 commented 6 months ago

--------- Instructions -------- Please provide answers directly below each section. --------- Instructions ---------

ESPixelStick Firmware Version ESPixelStick-4.0-beta5

Hardware Version ESP32 DEV

Binary release or compiled yourself? Binary (Generic ESP32 4MB)

Operating System (and version) Win10

Web Browser (and version) Firefox 121.0 (64-Bit)

Access Point

Describe the bug

  1. With 4.0-beta 4 it works well, apart from the known bugs.

  2. With 4.0-Beta 5 the outputs do not work correctly with exactly the same settings.

I have 2 universes with 471 channels each via E1.31. Channel 1 and 2 each have 157 pixels and should actually be WS2811 pixels.

With beta 5 I get the data displayed in the diagnostics when I send the internal effects or external data, but the pixels don't show anything. However, they are turned off when you turn on the controller. The outputs appear to be active.

The "solution" of the problem: Out of frustration I chose USC1903 instead of WS2811 and it works now?! Very confusing and I think there is a mistake in the code ;-)

MartinMueller2003 commented 6 months ago

Cant reproduce this. My WS2811 pixels are working fine.

Noelle88 commented 6 months ago

Okay, thanks for testing. I will try again with another controller and browser in a few days.

MartinMueller2003 commented 4 months ago

Any update on this?

MartinMueller2003 commented 3 months ago

Closing this issue since I cannot reproduce and the OP has not been able to provide additional information.