search

foxlet / bootra1n

Just enough Linux for checkra1n.
667 stars 134 forks source link

Shutdown/restart doesn't works #11

Open redgitid opened 4 years ago

redgitid commented 4 years ago

I tried both shutdown and restart but when I click - it is replaced by / and doesn't works

redgitid commented 4 years ago

I found the problem: on my keyboard, the key ' insert the key - 🤔

Janneske2001 commented 4 years ago

Also, although it's already solved, short-pressing the power-button would also give the command.

redgitid commented 4 years ago

@Janneske2001 power button on PC or on device?

Janneske2001 commented 4 years ago

@telegramcore on the PC, at least it works on my Acer Vivobook. I can see that pressing the power-button automatically sends a shutdown-command which it executes. The same line as manually typing the command. You're welcome! 😊👍

redgitid commented 4 years ago

Uhm i Will try thanks

Janneske2001 commented 4 years ago

No problem! 👍 If it worked, please let me know. And if it didn't work, well, also please let me know... 😅

redgitid commented 4 years ago

Ok i Will try 😂 quick press or hold for a few seconds?

Janneske2001 commented 4 years ago

Just a single short press does the job for me. 😅😂

redgitid commented 4 years ago

Tried and no, it for me doesn't put the command, just put my hp PC in standby mode 😂

Janneske2001 commented 4 years ago

Ah that's too bad...

TonnyMontenegro commented 4 years ago

When I try to turn it off by pressing the shutdown button it writes the command but it does not proceed to shutdown I have to force the shutdown by holding down the shutdown key for several seconds

(apparently this problem was solved in bootra1n 10.1 or at least in my PC)

Currently when I press the shutdown button it shows me the command and shuts down my pc correctly