Open datajerk opened 9 years ago
Hi,
did you install the logi-apps for logipi and tested the wishbone app (this will allow to make sure the communication with the FPGA is working fine) ?
Regards,
Jonathan Piat
2015-08-05 5:27 GMT+02:00 datajerk notifications@github.com:
Only output:
[0, 0, 0, 0]
About one line/5 seconds. Once on start I got nonce ffffffff immediately then exit.
After a bit of googling I did find a beaglebone reference that said it'd take 2 min. I've been waiting for hours.
LED1 is blinking ~2 times/sec.
Thanks.
— Reply to this email directly or view it on GitHub https://github.com/fpga-logi/logi-projects/issues/22.
Yes I installed the logipi apps, but only tested LED and Bitcoin app. Led app worked just fine.
I'll test wishbone next.
On Aug 5, 2015, at 2:41 AM, Piat Jonathan notifications@github.com wrote:
Hi,
did you install the logi-apps for logipi and tested the wishbone app (this will allow to make sure the communication with the FPGA is working fine) ?
Regards,
Jonathan Piat
2015-08-05 5:27 GMT+02:00 datajerk notifications@github.com:
Only output:
[0, 0, 0, 0]
About one line/5 seconds. Once on start I got nonce ffffffff immediately then exit.
After a bit of googling I did find a beaglebone reference that said it'd take 2 min. I've been waiting for hours.
LED1 is blinking ~2 times/sec.
Thanks.
— Reply to this email directly or view it on GitHub https://github.com/fpga-logi/logi-projects/issues/22.
— Reply to this email directly or view it on GitHub.
Update. I went back to using stock LOGI PI distro and it works just fine. So something with kernel 4.x not working correctly (custom image based on latest debian+kernel). I'll continue to look into it, but I consider this matter closed. Thanks.
On Wed, Aug 5, 2015 at 12:01 PM, Egan Ford datajerk@gmail.com wrote:
Yes I installed the logipi apps, but only tested LED and Bitcoin app. Led app worked just fine.
I'll test wishbone next.
On Aug 5, 2015, at 2:41 AM, Piat Jonathan notifications@github.com wrote:
Hi,
did you install the logi-apps for logipi and tested the wishbone app (this will allow to make sure the communication with the FPGA is working fine) ?
Regards,
Jonathan Piat
2015-08-05 5:27 GMT+02:00 datajerk notifications@github.com:
Only output:
[0, 0, 0, 0]
About one line/5 seconds. Once on start I got nonce ffffffff immediately then exit.
After a bit of googling I did find a beaglebone reference that said it'd take 2 min. I've been waiting for hours.
LED1 is blinking ~2 times/sec.
Thanks.
— Reply to this email directly or view it on GitHub https://github.com/fpga-logi/logi-projects/issues/22.
— Reply to this email directly or view it on GitHub https://github.com/fpga-logi/logi-projects/issues/22#issuecomment-127935901 .
Only output:
[0, 0, 0, 0]
About one line/5 seconds. Once on start I got
nonce ffffffff
immediately then exit.After a bit of googling I did find a beaglebone reference that said it'd take 2 min. I've been waiting for hours.
LED1 is blinking ~2 times/sec.
Thanks.