USB mode cannot be selected in the WTFOS

[DiehardFPV]

Currently use my V1 goggle for moonlight but i cannot use bulk and USB mode cannot be selected in the WTFOS

[DiehardFPV]

I also try to start dji-moonlight-shim on CLI

[j005u]

The instructions you are following are out of date. dji-moonlight-shim now accepts connections both in network mode and usb mode at the same time.

Just follow the setup instructions in the official README at https://github.com/fpv-wtf/dji-moonlight-shim#setup or wait for updated videos for the release version to be published.

[j005u]

Also please note that we have discovered an issue where at least for some people there is a significant delay in the image on V1 Goggles using GeForce Experience. If you run into it, please use Sunshine instead.

[DiehardFPV]

but i still cannot use usb mode

[j005u]

Did you install the drivers and close any fpv.wtf browser tabs? See here: https://github.com/fpv-wtf/dji-moonlight-gui#using-bulk-mode

If none of that works then use RNDIS mode instead of BULK mode, it's more stable.

[DiehardFPV]

Definitly close all fpv.wtf browser tabs, but i just used RNDIS mode and it's amazing!

[Spionkiller01]

Also please note that we have discovered an issue where at least for some people there is a significant delay in the image on V1 Goggles using GeForce Experience. If you run into it, please use Sunshine instead.

is this problem already fixed? i have a very high latency (10 sec or more) when i try to stream to my dji goggles v1. this is what the terminal in the gui shows:

No host address specified. Using 127.0.0.1 Connecting to 127.0.0.1... RTSP port: 48010 Initializing platform...done Resolving host name...done Initializing audio stream...done Starting RTSP handshake...Audio port: 48000 Video port: 47998 Control port: 47999 done Initializing control stream...done Initializing video stream...done Initializing input stream...done Starting control stream...done Starting video stream...dji_usb: 1440 x 810 @ 120 FPS dji_usb: context = 0x0 dji_usb: drFlags = 0x1 init usb open device claim interface set configuration send header header sent done Starting audio stream...done Starting input stream...done Received first audio packet after 0 ms Initial audio resync period: 500 milliseconds Received first video packet after 0 ms Video decode unit queue overflow IDR frame request sent Waiting for IDR frame Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent Video decode unit queue overflow IDR frame request sent