DJI Goggles V2 - "Switch to DJI Digital FPV System option is missing from the About menu"

[ipppolit]

UPDATE: To switch Rooted DJI Goggles V2 to DIY Mode via CLI on the https://fpv.wtf/cli use this command:

unrd product_type wm150_gls
reboot

DJI Goggles V2 - V01.00.0606 - DIY MODE Successfully completed the steps: Root, Install WTFOS, Install Packages. MSP OSD – full Betaflight OSD support has been working correctly. While setting up the LED matrix through the CLI on the website https://fpv.wtf/cli, the battery ran out of the goggles, something went wrong and they stopped working. After a hard reset, through a clamped bind when turned on, the goggles loaded successfully in DJI drone mode.

Issue - Switch to DJI Digital FPV System option is missing from the About menu.

I tried to go through all the steps to activate the goggles through the DJI Assistant in VPN mode through the US. The option to switch in DIY MODE did not appear.

When trying to flash V01.02.0020 FPV firmware (V01.02.0020_FPV_Racer_djisystem.bin Drone firmware from Dank Drone Downloader) via the Dronehacks desktop client, the error "This firmware is incompatible with the connected device_" occurs. The same error occurs when trying to flash other firmware versions: _V01.00.0606_GP150_dji_system.bin V01.02.0001_gl170_djisystem.bin

Dronehacks desktop client recognizes the glasses as a device gl170, firmware: V01.00.0606

What I'm doing wrong?

[stylesuxx]

Did you try tor refresh the firmware via DJI Assistant?

Edit: sorry, I missed that you already rooted. You can still connect to the goggles through the configurator though, right?

[j005u]

See here for switching modes via CLI: https://github.com/fpv-wtf/wtfos/wiki/Troubleshooting#switching-between-diy-and-dji-fpv-drone-modes-from-the-cli

[ipppolit]

Thanks, it works great!

To switch to DIY Mode via CLI on the https://fpv.wtf/cli

unrd product_type wm150_gls
reboot