5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560
I found that if I set $130-$134 to any value except zero and $20 = 0 then the machine still limit the movement (act like $20=1).
Seems the GRBL does not care about $20 if I set value to $130-$134.
Hi Fra,
I found that if I set $130-$134 to any value except zero and $20 = 0 then the machine still limit the movement (act like $20=1). Seems the GRBL does not care about $20 if I set value to $130-$134.