Kernel log after phone freezing

Please check the log.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-cyanogenmod-gd8c0761 (build04@cyanogenmod) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Nov 4 11:57:57 PST 2014
[    0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AC One+ A0001
[    0.000000] Initialized persistent memory from 60000000-600fffff
[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
[    0.000000] cma: Found secure_region, memory base 0x00000000, size 252 MiB, limit 0xffffffff
[    0.000000] cma: Found adsp_region, memory base 0x00000000, size 63 MiB, limit 0xffffffff
[    0.000000] cma: Found qsecom_region, memory base 0x00000000, size 17 MiB, limit 0xffffffff
[    0.000000] cma: Found audio_region, memory base 0x00000000, size 12 MiB, limit 0xffffffff
[    0.000000] cma: Found external_image_region@fa00000, memory base 0x0fa00000, size 5 MiB, limit 0xffffffff
[    0.000000] cma: Found peripheral_region@5a00000, memory base 0x05a00000, size 33 MiB, limit 0xffffffff
[    0.000000] cma: Found tz_apps@0x7b00000, memory base 0x07b00000, size 5 MiB, limit 0xffffffff
[    0.000000] cma: Found modem_region@0x8000000, memory base 0x08000000, size 82 MiB, limit 0xffffffff
[    0.000000] cma: Found oem_data_region@5900000, memory base 0x05900000, size 1 MiB, limit 0xffffffff
[    0.000000] cma: CMA: reserved 252 MiB at 0xb0400000 for secure_mem
[    0.000000] cma: CMA: reserved 64 MiB at 0xac400000 for adsp_mem
[    0.000000] cma: CMA: reserved 20 MiB at 0xab000000 for qseecom_mem
[    0.000000] cma: CMA: reserved 16 MiB at 0xaa000000 for audio_mem
[    0.000000] cma: CMA: reserved 5 MiB at 0x0fa00000 for (null)
[    0.000000] cma: CMA: reserved 33 MiB at 0x05a00000 for peripheral_mem
[    0.000000] cma: CMA: reserved 5 MiB at 0x07b00000 for tz_apps
[    0.000000] cma: CMA: reserved 82 MiB at 0x08000000 for modem_mem
[    0.000000] cma: CMA: reserved 1 MiB at 0x05900000 for oem_data
[    0.000000] cma: CMA: reserved 16 MiB at 0x2e800000 for default region
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] IMEM DT static mapping successful
[    0.000000] PERCPU: Embedded 7 pages/cpu @cea5a000 s16128 r0 d12544 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 748032
[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=bacon user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=10a1b9f0 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_1080p_cmd oppo.pcb_version=12 LCD_id<4 oppo.rf_version=66 maxcpus=2 androidboot.startupmode=charger androidboot.mode=charger lk_version=V1.0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 89MB 40MB 2817MB = 2946MB total
[    0.000000] Memory: 2561992k/2561992k available, 583736k reserved, 2006016K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]      lowmem : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0e9d000   (14932 kB)
[    0.000000]       .init : 0xc0f00000 - 0xc1015f00   (1112 kB)
[    0.000000]       .data : 0xc1016000 - 0xc10e9364   ( 845 kB)
[    0.000000]        .bss : 0xc10e9388 - 0xc140334c   (3176 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000108] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000129] pid_max: default: 32768 minimum: 301
[    0.000281] Security Framework initialized
[    0.000299] SELinux:  Initializing.
[    0.000398] Mount-cache hash table entries: 512
[    0.001274] Initializing cgroup subsys debug
[    0.001288] Initializing cgroup subsys cpuacct
[    0.001299] Initializing cgroup subsys freezer
[    0.001350] CPU: Testing write buffer coherency: ok
[    0.001599] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001675] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
[    0.005718] Setting up static identity map for 0xaf8ce8 - 0xaf8d70
[    0.005741] MSM Memory Dump table set up
[    0.007729] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.007919] Brought up 2 CPUs
[    0.007932] SMP: Total of 2 processors activated (76.80 BogoMIPS).
[    0.024661] dummy: 
[    0.043789] NET: Registered protocol family 16
[    0.046589] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.048695] KPI: Bootloader start count = 2160778159
[    0.048706] KPI: Bootloader end count = 2695912124
[    0.048715] KPI: Bootloader display count = 3267699542
[    0.048724] KPI: Bootloader load kernel count = 2820112849
[    0.048735] KPI: Kernel MPM timestamp = 240221
[    0.048743] KPI: Kernel MPM Clock frequency = 32768
[    0.048762] socinfo_print: v8, id=194, ver=1.1, raw_id=1972, raw_ver=1, hw_plat=8, hw_plat_ver=65536
[    0.048767]  accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
[    0.049121] msm_8974_init_gpiomux:1477 socinfo_get_version 10001
[    0.069574] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
[    0.095952] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[    0.124164] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle 
[    0.124722] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle 
[    0.125262] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle 
[    0.125851] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle 
[    0.126388] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.126927] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle 
[    0.127465] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.128062] 8841_s3: 1050 mV normal idle 
[    0.128631] 8841_s4: 815 <--> 900 mV at 0 mV normal idle 
[    0.129198] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.129736] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle 
[    0.130299] 8941_s1: 1300 mV normal idle 
[    0.130869] 8941_s2: 2150 mV normal idle 
[    0.131437] 8941_s3: 1800 mV normal idle 
[    0.132077] 8941_l1: 1225 mV normal idle 
[    0.132641] 8941_l2: 1200 mV normal idle 
[    0.133214] 8941_l3: 1000 <--> 1225 mV at 1000 mV normal idle 
[    0.133786] 8941_l4: 1225 mV normal idle 
[    0.134359] 8941_l5: 1800 mV normal idle 
[    0.134937] 8941_l6: 1800 mV normal idle 
[    0.135509] 8941_l7: 1800 mV normal idle 
[    0.136066] 8941_l8: 1800 mV normal idle 
[    0.136653] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle 
[    0.137247] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle 
[    0.137819] 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle 
[    0.138395] 8941_l12: 1800 mV normal idle 
[    0.138925] 8941_l12_ao: 1800 mV normal idle 
[    0.139519] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle 
[    0.140075] 8941_l14: 1800 mV normal idle 
[    0.140666] 8941_l15: 2050 mV normal idle 
[    0.141250] 8941_l16: 2700 mV normal idle 
[    0.141830] 8941_l17: 2700 <--> 2850 mV at 2700 mV normal idle 
[    0.142455] 8941_l18: 2850 mV normal idle 
[    0.143038] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle 
[    0.143620] 8941_l20: 2950 mV normal idle 
[    0.144215] 8941_l21: 2950 mV normal idle 
[    0.144806] 8941_l22: 3000 mV normal idle 
[    0.145387] 8941_l23: 2800 <--> 3000 mV at 2800 mV normal idle 
[    0.145993] 8941_l24: 3075 mV normal idle 
[    0.146553] 8941_lvs1: 
[    0.147079] 8941_lvs2: 
[    0.147579] 8941_lvs3: 
[    0.150701] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
[    0.150714] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
[    0.151108] krait0: 500 <--> 1120 mV at 900 mV fast normal idle 
[    0.151742] krait1: 500 <--> 1120 mV at 900 mV fast normal idle 
[    0.152417] krait2: 500 <--> 1120 mV at 900 mV fast normal idle 
[    0.153039] krait3: 500 <--> 1120 mV at 900 mV fast normal idle 
[    0.197646] msm-thermal qcom,msm-thermal.70: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[    0.198544] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[    0.198566] msm-thermal qcom,msm-thermal.70: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
[    0.198762] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[    0.199380] persistent_ram: found existing buffer, size 95420, start 95420
[    0.442602] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[    0.461479] console [ram-1] enabled
[    0.461600] 8941_l18: Failed to create debugfs directory
[    0.461982] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.462129] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.464518] 8941_boost: 4500 mV 
[    0.465188] 8941_mvs1: 
[    0.465354] qcom,qpnp-regulator qpnp-regulator-ee111400: Failed to find supply parent
[    0.465672] spmi qpnp-regulator-ee111400: Driver qcom,qpnp-regulator requests probe deferral
[    0.466165] 8941_mvs2: 
[    0.466302] 8941_mvs2: supplied by 8941_boost
[    0.470800] sps:BAM 0xf9984000 (va:0xc5ae0000) enabled: ver:0x6, number of pipes:20
[    0.470957] sps:BAM 0xf9984000 is registered.
[    0.471044] sps:sps is ready.
[    0.473615] gdsc_venus: 
[    0.474216] gdsc_mdss: 
[    0.474693] gdsc_jpeg: 
[    0.475191] gdsc_vfe: 
[    0.475646] gdsc_oxili_gx: 
[    0.475871] gdsc_oxili_gx: supplied by 8841_s4_corner
[    0.476350] gdsc_oxili_cx: 
[    0.476792] gdsc_usb_hsic: 
[    0.477768] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.485457] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
[    0.486142] Physical OCMEM zone layout:
[    0.486229]  zone graphics   : 0xfec00000 - 0xfecfffff (1024 KB)
[    0.486373]  zone lp_audio   : 0xfed00000 - 0xfed7ffff ( 512 KB)
[    0.486456]  zone video  : 0xfed00000 - 0xfed7ffff ( 512 KB)
[    0.513653] bio: create slab <bio-0> at 0
[    0.514804] platform spi_eth_phy_vreg.80: Driver reg-fixed-voltage requests probe deferral
[    0.515937] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
[    0.516126] ION-heap mm: Cannot specify alignment for this type of heap
[    0.516364] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
[    0.516548] ION-heap adsp: Cannot specify alignment for this type of heap
[    0.516794] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[    0.517069] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
[    0.517347] cma: Assigned CMA region at 5a00000 to 17.qcom,ion-heap device
[    0.517692] cma: Assigned CMA region at 8000000 to 1a.qcom,ion-heap device
[    0.518051] ION heap system created
[    0.518358] ION heap kmalloc created
[    0.518474] ION heap mm created at 0xb0400000 with size fc00000
[    0.518581] ION heap adsp created at 0xac400000 with size 3f00000
[    0.518749] ION heap qsecom created at 0xab000000 with size 1100000
[    0.518915] ION heap audio created at 0xaa000000 with size c04000
[    0.519021] ION heap pil_1 created at 0x05a00000 with size 2100000
[    0.519187] ION heap pil_2 created at 0x08000000 with size 5200000
[    0.522000] SCSI subsystem initialized
[    0.522224] usbcore: registered new interface driver usbfs
[    0.522439] usbcore: registered new interface driver hub
[    0.522670] usbcore: registered new device driver usb
[    0.523394] Linux media interface: v0.10
[    0.523524] Linux video capture interface: v2.00
[    0.527419] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5d00000, with 3 ctx banks
[    0.529711] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5d20000, with 3 ctx banks
[    0.533007] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5d40000, with 5 ctx banks
[    0.535193] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5d60000, with 3 ctx banks
[    0.537316] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5d80000, with 3 ctx banks
[    0.539528] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
[    0.539776] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
[    0.540092] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
[    0.540420] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
[    0.540687] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
[    0.540999] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
[    0.541332] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
[    0.541596] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
[    0.541951] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
[    0.542260] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
[    0.542570] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
[    0.542871] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
[    0.543189] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[    0.543502] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[    0.543767] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
[    0.544082] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
[    0.544392] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
[    0.547040] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.547756] Bluetooth: Core ver 2.16
[    0.547889] NET: Registered protocol family 31
[    0.548030] Bluetooth: HCI device and connection manager initialized
[    0.548111] Bluetooth: HCI socket layer initialized
[    0.548251] Bluetooth: L2CAP socket layer initialized
[    0.548706] Bluetooth: SCO socket layer initialized
[    0.549210] cfg80211: Calling CRDA to update world regulatory domain
[    0.549426] cfg80211: World regulatory domain updated:
[    0.549572] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.549656] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.549800] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.549944] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    0.550027] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[    0.550174] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[    0.550320] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[    0.550402] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[    0.550548] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[    0.550860] nfc: nfc_init: NFC Core ver 0.1
[    0.550998] NET: Registered protocol family 39
[    0.551919] Switching to clocksource arch_sys_counter
[    0.593058] NET: Registered protocol family 2
[    0.593400] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.594226] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.595844] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.596636] TCP: Hash tables configured (established 131072 bind 65536)
[    0.596781] TCP: reno registered
[    0.596870] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.597060] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.597512] NET: Registered protocol family 1
[    0.598086] Trying to unpack rootfs image as initramfs...
[    0.633348] Freeing initrd memory: 516K
[    0.637518] Detected 9 counters on the L2CC PMU.
[    0.640281] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[    0.641077] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[    0.641378] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[    0.642322] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[    0.642626] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[    0.643505] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[    0.643797] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[    0.644687] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[    0.644921] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[    0.645837] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[    0.646170] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[    0.647039] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[    0.647338] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[    0.648293] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[    0.648582] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
[    0.649557] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
[    0.649798] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
[    0.650794] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
[    0.653111] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[    0.658782] pil_pronto fb21b000.qcom,pronto: using secure boot
[    0.661352] pil_venus fdce0000.qcom,venus: using secure boot
[    0.674899] NET: Registered protocol family 27
[    0.682691] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
[    0.682863] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
[    0.683013] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 6
[    0.683096] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
[    0.687398] L2 @ 300000 KHz
[    0.687614] CPU0 @ 960000 KHz
[    0.687694] CPU1 @ unknown rate. Forcing new rate.
[    0.688005] CPU1 @ 300000 KHz
[    0.688195] CPU2 @ unknown rate. Forcing new rate.
[    0.688435] CPU2 @ 300000 KHz
[    0.688778] CPU3 @ unknown rate. Forcing new rate.
[    0.689013] CPU3 @ 300000 KHz
[    0.702188] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[    0.702882] msm_rpm_log_probe: OK
[    0.725208] mpm_counter: [    0.725189]:(262385)
[    0.730538] audit: initializing netlink socket (disabled)
[    0.730590] type=2000 audit(0.710:1): initialized
[    0.731079] highmem bounce pool size: 64 pages
[    0.733458] fuse init (API version 7.18)
[    0.733574] msgmni has been set to 1118
[    0.735018] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.735056] io scheduler noop registered (default)
[    0.735121] io scheduler deadline registered
[    0.735160] io scheduler row registered
[    0.735239] io scheduler cfq registered
[    0.735303] io scheduler test-iosched registered
[    0.735465] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
[    0.736399] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
[    0.738835] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
[    0.739555] lm3630_probe:yanghai.
[    0.741279] lm3630_chip_init: bl_initvalue=80
[    0.741343] lm3630_chip_init: bl_initvalue=80,222
[    0.741778] lm3630_probe:yanghai client irq =0
[    0.741815] lm3630_probe:yanghai----
[    0.741879] lm3630_bl 2-0036: LM3630 backlight register OK.
[    0.741930] i2c-core: driver [lm3630_bl] using legacy suspend method
[    0.741994] i2c-core: driver [lm3630_bl] using legacy resume method
[    0.742148] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5dc0000
[    0.742224] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5d74000
[    0.742373] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
[    0.743773] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[    0.743842] mdss_dsi_panel_init: Panel Name = jdi 1080p cmd mode dsi panel
[    0.744092] mdss_dsi_parse_panel_features: partial_update_enabled=1
[    0.744131] mdss_dsi_parse_panel_features: ulps feature disabled
[    0.744195] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
[    0.744264] mdss_dsi_panel_init: Continuous splash enabled
[    0.744579] dsi_panel_device_register:1566, lcd 5v en gpio not specified
[    0.744678] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5d76800 ctrl_size=1f8 phy_base=c5d78b00 phy_size=2b0
[    0.772339] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
[    0.772553] mdss_hw_init: MDP Rev=10020001
[    0.773703] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
[    0.773796] controller config is not present
[    0.773833] mdss_dsi_pref_prim_panel:can't find panel phandle
[    0.773896] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_jdi_1080p_cmd
[    0.773938] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 29
[    0.774969] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5
[    0.775605] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
[    0.775798] mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!
[    0.788538] sps: BAM device 0xf9944000 is not registered yet.
[    0.788606] sps:BAM 0xf9944000 is registered.
[    0.790394] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
[    0.790491] msm_hs_set_mctrl_locked:Failed.Clocks are OFF
[    0.794318] diagchar initialized nowkgsl bus ib [0] = 2456000000
[    0.795278] kgsl bus ib [1] = 3680000000
[    0.795313] kgsl bus ib [2] = 4912000000
[    0.795349] kgsl bus ib [3] = 7464000000
[    0.795412] kgsl bus index is 3 for pwrlevel 0
[    0.795446] kgsl bus index is 2 for pwrlevel 1
[    0.795480] kgsl bus index is 2 for pwrlevel 2
[    0.795542] kgsl bus index is 1 for pwrlevel 3
[    0.795576] kgsl bus index is 0 for pwrlevel 4
[    0.796101] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    0.796623] kgsl: num bus is 4
[    0.799429] brd: module loaded
[    0.800609] loop: module loaded
[    0.805521] QSEECOM: qseecom_probe: support_bus_scaling=0x1
[    0.805586] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
[    0.805653] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
[    0.805746] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
[    0.805811] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[    0.805928] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
[    0.806450] yanghai shineld driver init
[    0.806563] SN3193_power:yuyi for SN3193_SDB gpio---
[    0.912125] SN3193_probe:sn3193 probe
[    0.913103] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    0.913167] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    0.913276] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    0.913312] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    0.913390] Loading pn544 driver
[    0.913451] yuyi,clk_prepare_enable,return ret = 0
[    0.913525] pn544_probe : requesting IRQ 345
[    0.932277] SCSI Media Changer driver v0.25 
[    0.932743] sps:BAM 0xf9944000 (va:0xc5da0000) enabled: ver:0x13, number of pipes:24
[    0.932990] spi_qsd f9966000.spi: master is unqueued, this is deprecated
[    0.936319] spi_qsd f9965000.spi: using default bus_num -1
[    0.936527] spi_qsd f9965000.spi: master is unqueued, this is deprecated
[    0.940153] tun: Universal TUN/TAP device driver, 1.6
[    0.940190] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.940301] rmnet_init: BAM devices[9]
[    0.942899] PPP generic driver version 2.4.2
[    0.942979] PPP BSD Compression module registered
[    0.943043] PPP Deflate Compression module registered
[    0.943237] PPP MPPE Compression module registered
[    0.943302] NET: Registered protocol family 24
[    0.943349] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    0.943412] CSLIP: code copyright 1989 Regents of the University of California.
[    0.943617] wcnss_wlan probed in built-in mode
[    0.944167] usbcore: registered new interface driver asix
[    0.944215] usbcore: registered new interface driver cdc_ether
[    0.944289] usbcore: registered new interface driver net1080
[    0.944338] usbcore: registered new interface driver cdc_subset
[    0.944413] usbcore: registered new interface driver zaurus
[    0.944522] usbcore: registered new interface driver cdc_ncm
[    1.195318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.196126] usbcore: registered new interface driver cdc_acm
[    1.196189] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.196253] Initializing USB Mass Storage driver...
[    1.196302] usbcore: registered new interface driver usb-storage
[    1.196367] USB Mass Storage support registered.
[    1.196412] usbcore: registered new interface driver ums-alauda
[    1.196487] usbcore: registered new interface driver ums-cypress
[    1.196533] usbcore: registered new interface driver ums-datafab
[    1.196607] usbcore: registered new interface driver ums_eneub6250
[    1.196653] usbcore: registered new interface driver ums-freecom
[    1.196728] usbcore: registered new interface driver ums-isd200
[    1.196775] usbcore: registered new interface driver ums-jumpshot
[    1.196849] usbcore: registered new interface driver ums-karma
[    1.196895] usbcore: registered new interface driver ums-onetouch
[    1.196972] usbcore: registered new interface driver ums-sddr09
[    1.197019] usbcore: registered new interface driver ums-sddr55
[    1.197093] usbcore: registered new interface driver ums-usbat
[    1.197143] usbcore: registered new interface driver usb_ehset_test
[    1.197575] mbim_init: initialize 1 instances
[    1.197642] mbim_init: Initialized 1 ports
[    1.198374] rndis_qc_init: initialize rndis QC instance
[    1.198567]  gadget: Mass Storage Function, version: 2009/09/11
[    1.198631]  gadget: Number of LUNs=1
[    1.198666]  lun0: LUN: removable file: (no medium)
[    1.198812]  gadget: android_usb ready
[    1.199912] mousedev: PS/2 mouse device common for all mice
[    1.200096] usbcore: registered new interface driver xpad
[    1.200225] 8941_l22: Failed to create debugfs directory
[    1.200273] 8941_s3: Failed to create debugfs directory
[    1.702132] [syna] vendor id: 2
[    1.981071] [syna]maxx=1080,maxy=2040,vkh=114
[    1.981188] input: synaptics-rmi-ts as /devices/f9924000.i2c/i2c-2/2-0020/input/input0
[    1.981295] [syna]maxx=1080,maxy=2040,vkh=114
[    2.720541] [syna]maxx=1080,maxy=2040,vkh=114
[    2.752625] using rtc device, qpnp_rtc, for alarms
[    2.752668] qcom,qpnp-rtc qpnp-rtc-ee110a00: rtc core: registered qpnp_rtc as rtc0
[    2.752862] i2c /dev entries driver
[    2.753655] ocmem: Notifier registered for 1
[    2.754831] msm_cci_probe: pdev ee0d7e00 device id = -1
[    3.383342] msm_eeprom_platform_probe line 901
[    3.469994] msm_sensor_power_up:988
[    3.488838] msm_sensor_power_up exit
[    3.489000] msm_sensor_power_down:1172
[    3.500532] [syna]maxx=1080,maxy=2040,vkh=114
[    3.505774] msm_sensor_power_down exit
[    3.505818] [sensor_proc_init]: create qcom_sensor_state proc success 
[    3.506305] msm_sensor_power_up:988
[    3.528816] msm_sensor_power_up exit
[    3.528964] msm_sensor_power_down:1172
[    3.549885] msm_sensor_power_down exit
[    3.549926] [sensor_proc_init]: create qcom_sensor_state_1 proc success 
[    3.550895] __msm_jpeg_init:946] Jpeg Device id 0
[    3.551044] __msm_jpeg_init:946] Jpeg Device id 1
[    3.551186] __msm_jpeg_init:946] Jpeg Device id 2
[    3.567529] lirc_dev: IR Remote Control driver registered, major 234 
[    3.567599] IR NEC protocol handler initialized
[    3.567662] IR RC5(x) protocol handler initialized
[    3.567697] IR RC6 protocol handler initialized
[    3.567731] IR JVC protocol handler initialized
[    3.567793] IR Sony protocol handler initialized
[    3.567828] IR RC5 (streamzap) protocol handler initialized
[    3.567890] IR SANYO protocol handler initialized
[    3.567924] IR MCE Keyboard/mouse protocol handler initialized
[    3.567987] IR LIRC bridge handler initialized
[    3.568049] usbcore: registered new interface driver uvcvideo
[    3.568111] USB Video Class driver (1.1.1)
[    3.568451] i2c-core: driver [bq27541-battery] using legacy suspend method
[    3.568516] i2c-core: driver [bq27541-battery] using legacy resume method
[    3.568666] spmi qpnp-charger-ee110400: Driver qcom,qpnp-charger requests probe deferral
[    3.569046] lfc bq24196_probe
[    3.570638] bq24196 SYS_STS:0x44,fault_reg:0x0
[    3.572490] pic16F_probe pic16F_probe
[    3.572574] pic16f_fw_update pic16F_update_fw,erase data ing.......
[    3.576072] bq27541-battery 1-0055: DEVICE_TYPE is 0x541, FIRMWARE_VERSION is 0x200
[    3.576137] bq27541-battery 1-0055: Complete bq27541 configuration 0x605B
[    3.622851] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.622949] device-mapper: req-crypt: dm-req-crypt successfully initalized.
[    3.622951] 
[    3.623047] Bluetooth: HCI UART driver ver 2.2
[    3.623110] Bluetooth: HCIATH3K protocol initialized
[    3.623969] cpuidle: using governor ladder
[    3.624006] cpuidle: using governor menu
[    3.624081] sdhci: Secure Digital Host Controller Interface driver
[    3.624117] sdhci: Copyright(c) Pierre Ossman
[    3.624180] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.627043] mmc0: no vmmc regulator found
[    3.628331] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
[    3.631445] mmc1: no vmmc regulator found
[    3.632653] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
[    3.632997] qcom,leds-qpnp leds-qpnp-ee111a00: Regulator get failed(-517)
[    3.633063] qcom,leds-qpnp leds-qpnp-ee111a00: Unable to read flash config data
[    3.633103] spmi leds-qpnp-ee111a00: Driver qcom,leds-qpnp requests probe deferral
[    3.634141] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
[    3.634178] QCE50: __qce_get_device_tree_data: ce-device =0x0
[    3.634279] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000  
[    3.634373] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6040000
[    3.634438] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000  
[    3.634501] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
[    3.634710] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
[    3.634776] qce qcedev.0: CE device = 0x0
[    3.634778] , IO base, CE = 0xc6040000
[    3.634779] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[    3.634781] IO base BAM = 0x0
[    3.634782] BAM IRQ 268
[    3.634784] Engines Availability = 0x1010853
[    3.635045] QCE50: qce_sps_get_bam: qce50 don't support command descriptor. bam_cfg7fff004
[    3.635111] sps:BAM 0xfd444000 is registered.
[    3.635247] sps:BAM 0xfd444000 (va:0xc5df0000) enabled: ver:0x20, number of pipes:8
[    3.635491] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
[    3.635943] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
[    3.635981] QCE50: __qce_get_device_tree_data: ce-device =0x0
[    3.636090] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000  
[    3.636157] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6080000
[    3.636253] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000  
[    3.636289] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
[    3.636692] qcrypto fd440000.qcom,qcrypto: Qualcomm Crypto 5.1.0 device found @0xfd440000
[    3.636758] qcrypto fd440000.qcom,qcrypto: CE device = 0x0
[    3.636760] , IO base, CE = 0xc6080000
[    3.636762] , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
[    3.636763] IO base BAM = 0x0
[    3.636765] BAM IRQ 268
[    3.636766] Engines Availability = 0x1010853
[    3.637231] QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
[    3.637408] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-aes
[    3.637511] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-aes
[    3.637639] qcrypto fd440000.qcom,qcrypto: qcrypto-ctr-aes
[    3.637744] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-des
[    3.637869] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-des
[    3.637969] qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-3des
[    3.638067] qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-3des
[    3.638193] qcrypto fd440000.qcom,qcrypto: qcrypto-xts-aes
[    3.638292] qcrypto fd440000.qcom,qcrypto: qcrypto-sha1
[    3.638417] qcrypto fd440000.qcom,qcrypto: qcrypto-sha256
[    3.638516] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[    3.638641] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[    3.638766] qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[    3.638866] qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha1
[    3.638993] qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha256
[    3.639091] qcrypto fd440000.qcom,qcrypto: qcrypto-aes-ccm
[    3.639217] qcrypto fd440000.qcom,qcrypto: qcrypto-rfc4309-aes-ccm
[    3.639529] usbcore: registered new interface driver usbhid
[    3.639594] usbhid: USB HID core driver
[    3.639818] ashmem: initialized
[    3.639886] logger: created 256K log 'log_main'
[    3.639976] logger: created 256K log 'log_events'
[    3.640037] logger: created 256K log 'log_radio'
[    3.640127] logger: created 256K log 'log_system'
[    3.640575] sps:BAM 0xf9304000 is registered.
[    3.640620] sps:BAM 0xf9a44000 is registered.
[    3.640716] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
[    3.641092] qcom,qpnp-power-on qpnp-power-on-ee10f600: PMIC@SID0 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
[    3.641197] qcom,qpnp-power-on qpnp-power-on-ee10f600: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    3.641398] input: qpnp_pon as /devices/virtual/input/input1
[    3.642189] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
[    3.642664] pft [pft_init]: Drivr initialized successfully Oct 16 2014 06:56:20.n
[    3.642807] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
[    3.642952] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
[    3.643378] usbcore: registered new interface driver snd-usb-audio
[    3.650171] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
[    3.650647] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    3.651251] platform qcom,msm-voip-dsp.50: Driver msm-voip-dsp requests probe deferral
[    3.651594] platform qcom,msm-pcm-voice.51: Driver msm-pcm-voice requests probe deferral
[    3.653485] ocmem: Notifier registered for 5
[    3.654268] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
[    3.654400] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
[    3.655514] oprofile: using arm/armv7-krait
[    3.655595] u32 classifier
[    3.655630]     Actions configured
[    3.655668] Netfilter messages via NETLINK v0.30.
[    3.655767] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    3.656008] ctnetlink v0.93: registering with nfnetlink.
[    3.656090] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.656127] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.656275] xt_time: kernel timezone is -0000
[    3.656456] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.656611] arp_tables: (C) 2002 David S. Miller
[    3.656675] TCP: cubic registered
[    3.656739] Initializing XFRM netlink socket
[    3.656938] NET: Registered protocol family 10
[    3.658100] Mobile IPv6
[    3.658177] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.658293] IPv6 over IPv4 tunneling driver
[    3.658571] NET: Registered protocol family 17
[    3.658653] NET: Registered protocol family 15
[    3.658734] Bridge firewalling registered
[    3.658778] Ebtables v2.0 registered
[    3.658963] Bluetooth: RFCOMM TTY layer initialized
[    3.659019] Bluetooth: RFCOMM socket layer initialized
[    3.659108] Bluetooth: RFCOMM ver 1.11
[    3.659157] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.659205] Bluetooth: BNEP filters: protocol multicast
[    3.659294] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.659363] L2TP core driver, V2.0
[    3.659458] PPPoL2TP kernel driver, V2.0
[    3.659775] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
[    3.659922] Registering SWP/SWPB emulation handler
[    3.664103] gdsc_oxili_gx: disabling
[    3.664177] gdsc_venus: disabling
[    3.664638] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
[    3.664786] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
[    3.665242] qcom,leds-qpnp leds-qpnp-ee111a00: Regulator get failed(-517)
[    3.665307] qcom,leds-qpnp leds-qpnp-ee111a00: Unable to read flash config data
[    3.665375] spmi leds-qpnp-ee111a00: Driver qcom,leds-qpnp requests probe deferral
[    3.667556] input: gpio-keys as /devices/gpio_keys.83/input/input2
[    3.667950] qcom,qpnp-rtc qpnp-rtc-ee110a00: setting system clock to 1970-03-30 04:08:52 UTC (7618132)
[    3.668071] msm_thermal:interrupt_mode_init Interrupt mode init
[    3.668617] clock_late_init: Removing enables held for handed-off clocks
[    3.670737] bq24196_vddmax_set voltage:4350
[    3.671546] bad vbatdet:4250,default to 100mv
[    3.672359] bq24196_ibatmax_set chg_current:2000
[    3.672867] ALSA device list:
[    3.672905]   No soundcards found.
[    3.672971] Warning: unable to open an initial console.
[    3.673071] Freeing init memory: 84K
[    3.674991] batfet: 
[    3.675157] 8941_smbb_otg: 
[    3.675269] 8941_smbb_otg: supplied by 8941_boost
[    3.675526] 8941_smbb_boost: 5000 mV 
[    3.686608] bq24196_vddmax_set voltage:4350
[    3.686865] bq24196_charge_en enable:0
[    3.690594] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
[    3.690799] ethernet_phy: 
[    3.691066] 8941_mvs1: 
[    3.691115] 8941_mvs1: supplied by 8941_smbb_otg
[    3.691595] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
[    3.691882] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
[    3.693290] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
[    3.693509] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
[    3.711102] mmc0: BKOPS_EN bit = 0
[    3.729981] mmc0: new HS400 MMC card at address 0001
[    3.730279] mmcblk0: mmc0:0001 064GE2 58.2 GiB 
[    3.732182] mmcblk0rpmb: mmc0:0001 064GE2 partition 3 4.00 MiB
[    3.733002] Alternate GPT is invalid, using primary GPT.
[    3.733115]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
[    3.734258] type=1403 audit(7618132.560:2): policy loaded auid=4294967295 ses=4294967295
[    3.734417] SELinux: Loaded policy from /sepolicy
[    3.734969] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
[    3.735215] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
[    3.736270] SELinux: Loaded file_contexts from /file_contexts
[    3.736500] type=1404 audit(7618132.560:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    3.882285] qup_i2c f9923000.i2c: QUP: I2C status flags :0x41363c8, irq:127
[    3.882370] qup_i2c f9923000.i2c: I2C slave addr:0x25 not connected
[    3.882415] pic16f_fw_update pic16F_update_fw,i2c_write 0x01 error
[    3.882481] pic16f_fw_update pic16F update_fw fail
[    4.552246] dwc3 f9200000.dwc3: Avail curr from USB = 500
[    4.556720] bq24196_usb_suspend_enable enable:0
[    4.557533] bq24196_charge_en enable:1
[    4.559222] qpnp_start_charging: qpnp_start_charging:starting to enable charging
[    4.559300] bq24196_iusbmax_set mA:500
[    4.560100] bq24196_vddmax_set voltage:4350
[    4.560935] bq24196_ibatmax_set chg_current:500
[    4.561741] bad vbatdet:4250,default to 100mv
[    4.562546] bq24196_charge_en enable:1
[    5.008301] init: could not import file '/init.carrier.rc' from '/init.rc'
[    5.008564] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    5.009184] init: do_chown: Could not access /selinux/booleans
[    5.010202] init: invalid uid 'fm_radio'
[    5.282209] init: could not open /dev/keychord
[    5.282370] init: cannot open '/initlogo.rle'
[    5.287383] init: Unable to open persistent property directory /data/property errno: 2
[    5.288796] healthd: wakealarm_init: timerfd_create failed
[    5.289410] msm_thermal:store_cc_enabled Core control disabled
[    5.290181] charger: 
[    5.290283] charger: *************** LAST KMSG ***************
[    5.290322] charger: 
[    5.290352] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    5.290709] charger: last_kmsg not found. Cold reset?
[    5.290749] charger: 
[    5.290792] charger: ************* END LAST KMSG *************
[    5.290897] charger: 
[    5.290983] charger: --------------- STARTING CHARGER MODE ---------------
[    5.291473] charger: Exit from alarm thread
[    5.292070] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    5.317003] msm_thermal:store_cc_enabled Core control enabled
[    5.392296] mdss_dsi_on:544 Panel already on.
[    5.419543] charger: power supply usb (USB) online (action=add num_online=1 num_supplies=1)
[    5.420579] charger: power supply qpnp-dc (Mains) offline (action=add num_online=1 num_supplies=2)
[    5.442441] charger: power supply battery (Battery)  (action=add num_online=1 num_supplies=3)
[    7.214556] charger: Disabling backlight
[    7.741869] mdss_dsi_update_gamma_index: update gamma index=0
[    7.747046] mdss_dsi_update_color_enhance: enabled = 0
[    7.747097] mdss_dsi_update_cabc_level: update cabc level=0 (0) sre=0 (0)
[    7.790075] charger: Enabling backlight
[    7.866985] lm3630_bank_a_update_status set brightness :  100 
[    9.371825] charger: Enabling backlight
[   10.103592] charger: power supply battery (Battery)  (action=change num_online=1 num_supplies=3)
[   10.122399] charger: Enabling backlight
[   10.931527] charger: Enabling backlight
[   16.102915] charger: power supply battery (Battery)  (action=change num_online=1 num_supplies=3)
[   19.657310] charger: Disabling backlight
[   20.931864] mdss_dsi_update_gamma_index: update gamma index=0
[   20.937040] mdss_dsi_update_color_enhance: enabled = 0
[   20.937092] mdss_dsi_update_cabc_level: update cabc level=0 (0) sre=0 (0)
[   20.978975] charger: Enabling backlight
[   21.033729] lm3630_bank_a_update_status set brightness :  100 
[   22.102822] charger: power supply battery (Battery)  (action=change num_online=1 num_supplies=3)
[   22.194027] charger: Enabling backlight
[   22.944533] charger: Enabling backlight
[   23.754089] charger: Enabling backlight
[   24.463545] charger: [24451] rebooting
[   24.464547] SysRq : Emergency Remount R/O
[   24.465122] Emergency Remount complete
[   24.564360] mdss_fb_release_all: try to close unopened fb 1! from charger
[   24.848821] Restarting system.
[   24.849240] Going down for restart now
[   24.850879] Calling SCM to disable SPMI PMIC arbiter

No errors detected
franciscofranco / bacon

Kernel log after phone freezing #3

I will speak portuguese, is more simple to me ;)
