Cant make calls since 3.9.12

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Enter phone number.
2. Press Call.
3. Calling... but the call never rings.

What is the expected output? What do you see instead?
A call to be made. PBX wont even register call attempt. It worked before 
upgrade to 3.9.12. I can make calls with other softphones.

What version of the product are you using? On what operating system?
3.9.12
IOS 4.3.2
Please provide any additional information below.

Original issue reported on code.google.com by dqui...@gmail.com on 18 May 2011 at 5:34

[GoogleCodeExporter]

Hey !!! I got the same problem, my device running iOS 4.3.2 and i update siphon 
to 3.9.12 and i can't make a call :(

I figure out my problem and now i can make calls, go to setting >> media >> 
wifi codec and uncheck "G.722.1"
For me it works :) !!!

Original comment by quentin....@gmail.com on 23 May 2011 at 12:22

[GoogleCodeExporter]

If you enable all the codec, the message size is bigger to UDP protocol. In tis 
case, the protocol switches to TCP, and if you SIP provider doesn't accept TCP 
connection, the call can't be established :-(.
You can try to enable 'compact form' option. This option is enabled in phone 
advanced settings of Siphon.

I released a 3.9.13 version.

Original comment by samuelv0...@gmail.com on 28 May 2011 at 7:58

[GoogleCodeExporter]

The strange thing is that I was able to make calls with .11, upgraded to .12 
and couldnt make calls. I didnt change any codec or setting.
Today I upgraded to .13, it deleted my account so I had to config it again, not 
good. Enabled 'compact form' and still no calls. Disabled both G.722 codecs, 
still no calls. Now it is working, enabled both G722 protocols and it is still 
working. So I dont know what fixed it.
So the protocols are the same, No 'compact'form' and it works.

Original comment by dqui...@gmail.com on 28 May 2011 at 12:14

[GoogleCodeExporter]

on 3.9.13 it deleted my account and now the save button is always disabled so i 
cannot save the account details and am stuck at the new account screen. I 
removed and reinstalled but same problem. Are there some files i need to 
remove/ corrupted?

Original comment by mbn...@gmail.com on 28 May 2011 at 10:55

[GoogleCodeExporter]

I am facing the same problem and now I am stuck at settings and can't save the 
settings

Original comment by pareshth...@gmail.com on 28 May 2011 at 11:09

[GoogleCodeExporter]

From the library/preference I deleted com.google. All files and in document I 
also deleted log file also then removed sipphon 3.9.13 then restarted phone 
then again installed siphon but yet I am stuck on setting page where I cannot 
save the settings as save button doesn't work pls help at earliest 

Original comment by pareshth...@gmail.com on 28 May 2011 at 11:56

[GoogleCodeExporter]

About "save button issue" can you switch to issue 522 ?

Original comment by samuelv0...@gmail.com on 30 May 2011 at 10:55

[GoogleCodeExporter]

I don't have a problem with the save button. I don't know why people wrote
about this on my issue as mine was about something else.

Original comment by dqui...@gmail.com on 30 May 2011 at 10:59

[GoogleCodeExporter]

I released 3.9.16, can you tell be if this version fix your issue ?

Original comment by samuelv0...@gmail.com on 25 Jul 2011 at 10:28

[GoogleCodeExporter]

It seems to be working. Please make sure when you release an update it
doesn't delete the account settings. It is VERY annoying to have to
configure Siphon everytime there is an upgrade.

Original comment by dqui...@gmail.com on 25 Jul 2011 at 10:41

[GoogleCodeExporter]

Original comment by samuelv0...@gmail.com on 28 Jul 2011 at 6:22

• Changed state: Fixed