Closed mathias-aa closed 10 years ago
mathias-aa
commented
10 years ago the problem seems to be that there is no '/vagrant/c4/vendor/autoload.php'. When does this file is generated ?
I've got a timeout exceeded fail during zendframework install. I've managed to do it myself step by step. How can I upsize this limit of 300s ?
mathias-aa
commented
10 years ago oops, closed by mistake :'(
mathias-aa
commented
10 years ago ok ! i've managed to deal with provisionning and installation. This is what i needed to do to make it work :
I had to deal with provisionning the reset.sh file by hand. I don't know why, but every commands works fine if launched one by one, but not it lauched through the reset.sh file...
But for now it works like a charm :)
Hi,
I've followed the instructions to launch a fresh install of Change4 but with no success. Info 1 : I'm on a win7 host. Info 2 : If I ping http://localhost:8888/admin.php from the host, i've got no response (by the way, i think there is a mistake in the instruction, the link point to port 8880 but the label of the link point to port 8888). If I try from the browser, got a 404 "file not found" page. Info 3 : there is my log from my console during vagrant process (quite long though).
=> I think there is a problem provisionning samples, then no webapp is setted up since /vagrant/c4/www folder is empty.
Is there a workaround ?
vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Clearing any previously set forwarded ports... ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat default: Adapter 2: hostonly ==> default: Forwarding ports... default: 80 => 8888 (adapter 1) default: 22 => 2222 (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2222 default: SSH username: vagrant default: SSH auth method: private key default: Warning: Connection timeout. Retrying... ==> default: Machine booted and ready! ==> default: Checking for guest additions in VM... ==> default: Configuring and enabling network interfaces... ==> default: Mounting shared folders... default: /vagrant => C:/wamp/www/VAGRANT/c4vagrant ==> default: Running provisioner: shell... default: Running: C:/Users/MMARRI~1/AppData/Local/Temp/vagrant-shell20140829-6416-1kg3twv.sh ==> default: stdin: is not a tty ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: git-man liberror-perl ==> default: Suggested packages: ==> default: git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk ==> default: gitweb git-arch git-bzr git-cvs git-mediawiki git-svn ==> default: The following NEW packages will be installed: ==> default: git git-man liberror-perl ==> default: 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. ==> default: Need to get 3,274 kB of archives. ==> default: After this operation, 21.6 MB of additional disk space will be used. ==> default: Get:1 http://us.archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB] ==> default: Get:2 http://us.archive.ubuntu.com/ubuntu/ trusty/main git-man all 1:1.9.1-1 [698 kB] ==> default: Get:3 http://us.archive.ubuntu.com/ubuntu/ trusty/main git amd64 1:1.9.1-1 [2,555 kB] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 3,274 kB in 14s (223 kB/s) ==> default: Selecting previously unselected package liberror-perl. ==> default: (Reading database ... 74120 files and directories currently installed.) ==> default: Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ... ==> default: Unpacking liberror-perl (0.17-1.1) ... ==> default: Selecting previously unselected package git-man. ==> default: Preparing to unpack .../git-man_1%3a1.9.1-1_all.deb ... ==> default: Unpacking git-man (1:1.9.1-1) ... ==> default: Selecting previously unselected package git. ==> default: Preparing to unpack .../git_1%3a1.9.1-1_amd64.deb ... ==> default: Unpacking git (1:1.9.1-1) ... ==> default: Processing triggers for man-db (2.6.7.1-1) ... ==> default: Setting up liberror-perl (0.17-1.1) ... ==> default: Setting up git-man (1:1.9.1-1) ... ==> default: Setting up git (1:1.9.1-1) ... ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: libaio1 libdbd-mysql-perl libdbi-perl libhtml-template-perl libmysqlclient18 ==> default: libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common ==> default: mysql-server-5.5 mysql-server-core-5.5 ==> default: Suggested packages: ==> default: libclone-perl libmldbm-perl libnet-daemon-perl libplrpc-perl ==> default: libsql-statement-perl libipc-sharedcache-perl tinyca mailx ==> default: The following NEW packages will be installed: ==> default: libaio1 libdbd-mysql-perl libdbi-perl libhtml-template-perl libmysqlclient18 ==> default: libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common ==> default: mysql-server mysql-server-5.5 mysql-server-core-5.5 ==> default: 0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded. ==> default: Need to get 9,037 kB of archives. ==> default: After this operation, 96.5 MB of additional disk space will be used. ==> default: Get:1 http://us.archive.ubuntu.com/ubuntu/ trusty/main libaio1 amd64 0.3.109-4 [6,364 B] ==> default: Get:2 http://us.archive.ubuntu.com/ubuntu/ trusty/main mysql-common all 5.5.35+dfsg-1ubuntu1 [14.1 kB] ==> default: Get:3 http://us.archive.ubuntu.com/ubuntu/ trusty/main libmysqlclient18 amd64 5.5.35+dfsg-1ubuntu1 [593 kB]
==> default: Get:4 http://us.archive.ubuntu.com/ubuntu/ trusty/main libdbi-perl amd64 1.630-1 [879 kB] ==> default: Get:5 http://us.archive.ubuntu.com/ubuntu/ trusty/main libdbd-mysql-perl amd64 4.025-1 [99.3 kB] ==> default: Get:6 http://us.archive.ubuntu.com/ubuntu/ trusty/main libterm-readkey-perl amd64 2.31-1 [27.4 kB] ==> default: Get:7 http://us.archive.ubuntu.com/ubuntu/ trusty/main mysql-client-core-5.5 amd64 5.5.35+dfsg-1ubuntu1 [70 1 kB] ==> default: Get:8 http://us.archive.ubuntu.com/ubuntu/ trusty/main mysql-client-5.5 amd64 5.5.35+dfsg-1ubuntu1 [1,458 k B] ==> default: Get:9 http://us.archive.ubuntu.com/ubuntu/ trusty/main mysql-server-core-5.5 amd64 5.5.35+dfsg-1ubuntu1 [3, 208 kB] ==> default: Get:10 http://us.archive.ubuntu.com/ubuntu/ trusty/main mysql-server-5.5 amd64 5.5.35+dfsg-1ubuntu1 [1,972 kB] ==> default: Get:11 http://us.archive.ubuntu.com/ubuntu/ trusty/main libhtml-template-perl all 2.95-1 [65.5 kB] ==> default: Get:12 http://us.archive.ubuntu.com/ubuntu/ trusty/main mysql-server all 5.5.35+dfsg-1ubuntu1 [12.5 kB] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 9,037 kB in 14s (607 kB/s) ==> default: Selecting previously unselected package libaio1:amd64. ==> default: (Reading database ... 74868 files and directories currently installed.) ==> default: Preparing to unpack .../libaio1_0.3.109-4_amd64.deb ... ==> default: Unpacking libaio1:amd64 (0.3.109-4) ... ==> default: Selecting previously unselected package mysql-common. ==> default: Preparing to unpack .../mysql-common_5.5.35+dfsg-1ubuntu1_all.deb ... ==> default: Unpacking mysql-common (5.5.35+dfsg-1ubuntu1) ... ==> default: Selecting previously unselected package libmysqlclient18:amd64. ==> default: Preparing to unpack .../libmysqlclient18_5.5.35+dfsg-1ubuntu1_amd64.deb ... ==> default: Unpacking libmysqlclient18:amd64 (5.5.35+dfsg-1ubuntu1) ... ==> default: Selecting previously unselected package libdbi-perl. ==> default: Preparing to unpack .../libdbi-perl_1.630-1_amd64.deb ... ==> default: Unpacking libdbi-perl (1.630-1) ... ==> default: Selecting previously unselected package libdbd-mysql-perl. ==> default: Preparing to unpack .../libdbd-mysql-perl_4.025-1_amd64.deb ... ==> default: Unpacking libdbd-mysql-perl (4.025-1) ... ==> default: Selecting previously unselected package libterm-readkey-perl. ==> default: Preparing to unpack .../libterm-readkey-perl_2.31-1_amd64.deb ... ==> default: Unpacking libterm-readkey-perl (2.31-1) ... ==> default: Selecting previously unselected package mysql-client-core-5.5. ==> default: Preparing to unpack .../mysql-client-core-5.5_5.5.35+dfsg-1ubuntu1_amd64.deb ... ==> default: Unpacking mysql-client-core-5.5 (5.5.35+dfsg-1ubuntu1) ... ==> default: Selecting previously unselected package mysql-client-5.5. ==> default: Preparing to unpack .../mysql-client-5.5_5.5.35+dfsg-1ubuntu1_amd64.deb ... ==> default: Unpacking mysql-client-5.5 (5.5.35+dfsg-1ubuntu1) ... ==> default: Selecting previously unselected package mysql-server-core-5.5. ==> default: Preparing to unpack .../mysql-server-core-5.5_5.5.35+dfsg-1ubuntu1_amd64.deb ... ==> default: Unpacking mysql-server-core-5.5 (5.5.35+dfsg-1ubuntu1) ... ==> default: Processing triggers for man-db (2.6.7.1-1) ... ==> default: Setting up mysql-common (5.5.35+dfsg-1ubuntu1) ... ==> default: Selecting previously unselected package mysql-server-5.5. ==> default: (Reading database ... 75231 files and directories currently installed.) ==> default: Preparing to unpack .../mysql-server-5.5_5.5.35+dfsg-1ubuntu1_amd64.deb ... ==> default: Unpacking mysql-server-5.5 (5.5.35+dfsg-1ubuntu1) ... ==> default: Selecting previously unselected package libhtml-template-perl. ==> default: Preparing to unpack .../libhtml-template-perl_2.95-1_all.deb ... ==> default: Unpacking libhtml-template-perl (2.95-1) ... ==> default: Selecting previously unselected package mysql-server. ==> default: Preparing to unpack .../mysql-server_5.5.35+dfsg-1ubuntu1_all.deb ... ==> default: Unpacking mysql-server (5.5.35+dfsg-1ubuntu1) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: ureadahead will be reprofiled on next reboot ==> default: Processing triggers for man-db (2.6.7.1-1) ... ==> default: Setting up libaio1:amd64 (0.3.109-4) ... ==> default: Setting up libmysqlclient18:amd64 (5.5.35+dfsg-1ubuntu1) ... ==> default: Setting up libdbi-perl (1.630-1) ... ==> default: Setting up libdbd-mysql-perl (4.025-1) ... ==> default: Setting up libterm-readkey-perl (2.31-1) ... ==> default: Setting up mysql-client-core-5.5 (5.5.35+dfsg-1ubuntu1) ... ==> default: Setting up mysql-client-5.5 (5.5.35+dfsg-1ubuntu1) ... ==> default: Setting up mysql-server-core-5.5 (5.5.35+dfsg-1ubuntu1) ... ==> default: Setting up mysql-server-5.5 (5.5.35+dfsg-1ubuntu1) ... ==> default: 140829 9:02:41 [Warning] Using unique option prefix key_buffer instead of key_buffer_size is deprecated an d will be removed in a future release. Please use the full name instead. ==> default: mysql start/running, process 7313 ==> default: Setting up libhtml-template-perl (2.95-1) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Setting up mysql-server (5.5.35+dfsg-1ubuntu1) ... ==> default: Processing triggers for libc-bin (2.19-0ubuntu6) ... ==> default: Warning: Unable to load '/usr/share/zoneinfo/iso3166.tab' as time zone. Skipping it. ==> default: Warning: Unable to load '/usr/share/zoneinfo/zone.tab' as time zone. Skipping it. ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: libjemalloc1 redis-tools ==> default: The following NEW packages will be installed: ==> default: libjemalloc1 redis-server redis-tools ==> default: 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. ==> default: Need to get 410 kB of archives. ==> default: After this operation, 1,272 kB of additional disk space will be used. ==> default: Get:1 http://us.archive.ubuntu.com/ubuntu/ trusty/universe libjemalloc1 amd64 3.5.1-2 [76.8 kB] ==> default: Get:2 http://us.archive.ubuntu.com/ubuntu/ trusty/universe redis-tools amd64 2:2.8.4-2 [65.7 kB] ==> default: Get:3 http://us.archive.ubuntu.com/ubuntu/ trusty/universe redis-server amd64 2:2.8.4-2 [267 kB] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 410 kB in 7s (56.0 kB/s) ==> default: Selecting previously unselected package libjemalloc1. ==> default: (Reading database ... 75332 files and directories currently installed.) ==> default: Preparing to unpack .../libjemalloc1_3.5.1-2_amd64.deb ... ==> default: Unpacking libjemalloc1 (3.5.1-2) ... ==> default: Selecting previously unselected package redis-tools. ==> default: Preparing to unpack .../redis-tools_2%3a2.8.4-2_amd64.deb ... ==> default: Unpacking redis-tools (2:2.8.4-2) ... ==> default: Selecting previously unselected package redis-server. ==> default: Preparing to unpack .../redis-server_2%3a2.8.4-2_amd64.deb ... ==> default: Unpacking redis-server (2:2.8.4-2) ... ==> default: Processing triggers for man-db (2.6.7.1-1) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Setting up libjemalloc1 (3.5.1-2) ... ==> default: Setting up redis-tools (2:2.8.4-2) ... ==> default: Setting up redis-server (2:2.8.4-2) ... ==> default: Starting redis-server: ==> default: redis-server. ==> default: Processing triggers for libc-bin (2.19-0ubuntu6) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: fontconfig-config fonts-dejavu-core ghostscript gsfonts imagemagick-common ==> default: libavahi-client3 libavahi-common-data libavahi-common3 libcups2 ==> default: libcupsfilters1 libcupsimage2 libfftw3-double3 libfontconfig1 libgd3 libgs9 ==> default: libgs9-common libicu52 libijs-0.35 libjasper1 libjbig0 libjbig2dec0 ==> default: libjpeg-turbo8 libjpeg8 liblcms2-2 liblqr-1-0 libltdl7 libmagickcore5 ==> default: libmagickwand5 libmcrypt4 libpaper-utils libpaper1 libtiff5 libvpx1 libxpm4 ==> default: libxslt1.1 php5-common php5-readline poppler-data ttf-dejavu-core ==> default: Suggested packages: ==> default: ghostscript-x hpijs cups-common libfftw3-bin libfftw3-dev libgd-tools ==> default: fonts-droid libjasper-runtime liblcms2-utils libmagickcore5-extra ==> default: libmcrypt-dev mcrypt php-pear php5-user-cache poppler-utils ==> default: fonts-japanese-mincho fonts-ipafont-mincho fonts-japanese-gothic ==> default: fonts-ipafont-gothic fonts-arphic-ukai fonts-arphic-uming fonts-unfonts-core ==> default: The following NEW packages will be installed: ==> default: fontconfig-config fonts-dejavu-core ghostscript gsfonts imagemagick-common ==> default: libavahi-client3 libavahi-common-data libavahi-common3 libcups2 ==> default: libcupsfilters1 libcupsimage2 libfftw3-double3 libfontconfig1 libgd3 libgs9 ==> default: libgs9-common libicu52 libijs-0.35 libjasper1 libjbig0 libjbig2dec0 ==> default: libjpeg-turbo8 libjpeg8 liblcms2-2 liblqr-1-0 libltdl7 libmagickcore5 ==> default: libmagickwand5 libmcrypt4 libpaper-utils libpaper1 libtiff5 libvpx1 libxpm4 ==> default: libxslt1.1 php5-cli php5-common php5-curl php5-fpm php5-gd php5-imagick ==> default: php5-intl php5-json php5-mcrypt php5-mysql php5-readline php5-redis php5-xsl ==> default: poppler-data ttf-dejavu-core ==> default: 0 upgraded, 50 newly installed, 0 to remove and 0 not upgraded. ==> default: Need to get 26.6 MB of archives. ==> default: After this operation, 105 MB of additional disk space will be used. ==> default: Get:1 http://us.archive.ubuntu.com/ubuntu/ trusty/main imagemagick-common all 8:6.7.7.10-6ubuntu3 [37.2 kB]
==> default: Get:2 http://us.archive.ubuntu.com/ubuntu/ trusty/main libavahi-common-data amd64 0.6.31-4ubuntu1 [21.2 kB]
==> default: Get:3 http://us.archive.ubuntu.com/ubuntu/ trusty/main libavahi-common3 amd64 0.6.31-4ubuntu1 [21.7 kB] ==> default: Get:4 http://us.archive.ubuntu.com/ubuntu/ trusty/main libavahi-client3 amd64 0.6.31-4ubuntu1 [25.1 kB] ==> default: Get:5 http://us.archive.ubuntu.com/ubuntu/ trusty/main libcups2 amd64 1.7.2-0ubuntu1 [179 kB] ==> default: Get:6 http://us.archive.ubuntu.com/ubuntu/ trusty/main libjpeg-turbo8 amd64 1.3.0-0ubuntu2 [104 kB] ==> default: Get:7 http://us.archive.ubuntu.com/ubuntu/ trusty/main libjpeg8 amd64 8c-2ubuntu8 [2,194 B] ==> default: Get:8 http://us.archive.ubuntu.com/ubuntu/ trusty/main libjbig0 amd64 2.0-2ubuntu4 [25.9 kB] ==> default: Get:9 http://us.archive.ubuntu.com/ubuntu/ trusty/main libtiff5 amd64 4.0.3-7 [142 kB] ==> default: Get:10 http://us.archive.ubuntu.com/ubuntu/ trusty/main libcupsfilters1 amd64 1.0.52-0ubuntu1 [74.3 kB] ==> default: Get:11 http://us.archive.ubuntu.com/ubuntu/ trusty/main libcupsimage2 amd64 1.7.2-0ubuntu1 [15.3 kB] ==> default: Get:12 http://us.archive.ubuntu.com/ubuntu/ trusty/main libfftw3-double3 amd64 3.3.3-7ubuntu3 [702 kB] ==> default: Get:13 http://us.archive.ubuntu.com/ubuntu/ trusty/main fonts-dejavu-core all 2.34-1ubuntu1 [1,024 kB] ==> default: Get:14 http://us.archive.ubuntu.com/ubuntu/ trusty/main fontconfig-config all 2.11.0-0ubuntu4 [47.3 kB] ==> default: Get:15 http://us.archive.ubuntu.com/ubuntu/ trusty/main libfontconfig1 amd64 2.11.0-0ubuntu4 [123 kB] ==> default: Get:16 http://us.archive.ubuntu.com/ubuntu/ trusty/main libvpx1 amd64 1.3.0-2 [556 kB] ==> default: Get:17 http://us.archive.ubuntu.com/ubuntu/ trusty/main libxpm4 amd64 1:3.5.10-1 [38.3 kB] ==> default: Get:18 http://us.archive.ubuntu.com/ubuntu/ trusty/main libgd3 amd64 2.1.0-3 [147 kB] ==> default: Get:19 http://us.archive.ubuntu.com/ubuntu/ trusty/main libicu52 amd64 52.1-3 [6,770 kB] ==> default: Get:20 http://us.archive.ubuntu.com/ubuntu/ trusty/main libjasper1 amd64 1.900.1-14ubuntu3 [129 kB] ==> default: Get:21 http://us.archive.ubuntu.com/ubuntu/ trusty/main liblcms2-2 amd64 2.5-0ubuntu4 [132 kB] ==> default: Get:22 http://us.archive.ubuntu.com/ubuntu/ trusty/main liblqr-1-0 amd64 0.4.1-2ubuntu1 [23.4 kB] ==> default: Get:23 http://us.archive.ubuntu.com/ubuntu/ trusty/main libltdl7 amd64 2.4.2-1.7ubuntu1 [35.0 kB] ==> default: Get:24 http://us.archive.ubuntu.com/ubuntu/ trusty/main libmagickcore5 amd64 8:6.7.7.10-6ubuntu3 [1,469 kB]
==> default: Get:25 http://us.archive.ubuntu.com/ubuntu/ trusty/main libmagickwand5 amd64 8:6.7.7.10-6ubuntu3 [266 kB] ==> default: Get:26 http://us.archive.ubuntu.com/ubuntu/ trusty/main libpaper1 amd64 1.1.24+nmu2ubuntu3 [13.4 kB] ==> default: Get:27 http://us.archive.ubuntu.com/ubuntu/ trusty/main libxslt1.1 amd64 1.1.28-2build1 [145 kB] ==> default: Get:28 http://us.archive.ubuntu.com/ubuntu/ trusty/main php5-json amd64 1.3.2-2build1 [34.4 kB] ==> default: Get:29 http://us.archive.ubuntu.com/ubuntu/ trusty/main php5-common amd64 5.5.9+dfsg-1ubuntu4 [439 kB] ==> default: Get:30 http://us.archive.ubuntu.com/ubuntu/ trusty/main php5-curl amd64 5.5.9+dfsg-1ubuntu4 [27.2 kB] ==> default: Get:31 http://us.archive.ubuntu.com/ubuntu/ trusty/universe php5-fpm amd64 5.5.9+dfsg-1ubuntu4 [2,190 kB] ==> default: Get:32 http://us.archive.ubuntu.com/ubuntu/ trusty/main php5-gd amd64 5.5.9+dfsg-1ubuntu4 [27.8 kB] ==> default: Get:33 http://us.archive.ubuntu.com/ubuntu/ trusty/universe php5-intl amd64 5.5.9+dfsg-1ubuntu4 [109 kB] ==> default: Get:34 http://us.archive.ubuntu.com/ubuntu/ trusty/main php5-mysql amd64 5.5.9+dfsg-1ubuntu4 [62.7 kB] ==> default: Get:35 http://us.archive.ubuntu.com/ubuntu/ trusty/main php5-cli amd64 5.5.9+dfsg-1ubuntu4 [2,163 kB] ==> default: Get:36 http://us.archive.ubuntu.com/ubuntu/ trusty/main php5-readline amd64 5.5.9+dfsg-1ubuntu4 [12.1 kB] ==> default: Get:37 http://us.archive.ubuntu.com/ubuntu/ trusty/main php5-xsl amd64 5.5.9+dfsg-1ubuntu4 [13.8 kB] ==> default: Get:38 http://us.archive.ubuntu.com/ubuntu/ trusty/main poppler-data all 0.4.6-4 [1,479 kB] ==> default: Get:39 http://us.archive.ubuntu.com/ubuntu/ trusty/main libijs-0.35 amd64 0.35-8build1 [16.8 kB] ==> default: Get:40 http://us.archive.ubuntu.com/ubuntu/ trusty/main libjbig2dec0 amd64 0.11+20120125-1ubuntu1 [48.6 kB]
==> default: Get:41 http://us.archive.ubuntu.com/ubuntu/ trusty/main libgs9-common all 9.10~dfsg-0ubuntu10 [2,068 kB] ==> default: Get:42 http://us.archive.ubuntu.com/ubuntu/ trusty/main libgs9 amd64 9.10~dfsg-0ubuntu10 [1,942 kB] ==> default: Get:43 http://us.archive.ubuntu.com/ubuntu/ trusty/main gsfonts all 1:8.11+urwcyr1.0.7~pre44-4.2ubuntu1 [3, 374 kB] ==> default: Get:44 http://us.archive.ubuntu.com/ubuntu/ trusty/main ghostscript amd64 9.10~dfsg-0ubuntu10 [40.8 kB] ==> default: Get:45 http://us.archive.ubuntu.com/ubuntu/ trusty/universe libmcrypt4 amd64 2.5.8-3.1ubuntu1 [61.9 kB] ==> default: Get:46 http://us.archive.ubuntu.com/ubuntu/ trusty/main libpaper-utils amd64 1.1.24+nmu2ubuntu3 [8,244 B] ==> default: Get:47 http://us.archive.ubuntu.com/ubuntu/ trusty/universe php5-imagick amd64 3.1.2-1build1 [95.1 kB] ==> default: Get:48 http://us.archive.ubuntu.com/ubuntu/ trusty/universe php5-mcrypt amd64 5.4.6-0ubuntu5 [15.4 kB] ==> default: Get:49 http://us.archive.ubuntu.com/ubuntu/ trusty/universe php5-redis amd64 2.2.4-1build2 [105 kB] ==> default: Get:50 http://us.archive.ubuntu.com/ubuntu/ trusty/main ttf-dejavu-core all 2.34-1ubuntu1 [2,956 B] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 26.6 MB in 41s (646 kB/s) ==> default: Selecting previously unselected package imagemagick-common. ==> default: (Reading database ... 75361 files and directories currently installed.) ==> default: Preparing to unpack .../imagemagick-common_8%3a6.7.7.10-6ubuntu3_all.deb ... ==> default: Unpacking imagemagick-common (8:6.7.7.10-6ubuntu3) ... ==> default: Selecting previously unselected package libavahi-common-data:amd64. ==> default: Preparing to unpack .../libavahi-common-data_0.6.31-4ubuntu1_amd64.deb ... ==> default: Unpacking libavahi-common-data:amd64 (0.6.31-4ubuntu1) ... ==> default: Selecting previously unselected package libavahi-common3:amd64. ==> default: Preparing to unpack .../libavahi-common3_0.6.31-4ubuntu1_amd64.deb ... ==> default: Unpacking libavahi-common3:amd64 (0.6.31-4ubuntu1) ... ==> default: Selecting previously unselected package libavahi-client3:amd64. ==> default: Preparing to unpack .../libavahi-client3_0.6.31-4ubuntu1_amd64.deb ... ==> default: Unpacking libavahi-client3:amd64 (0.6.31-4ubuntu1) ... ==> default: Selecting previously unselected package libcups2:amd64. ==> default: Preparing to unpack .../libcups2_1.7.2-0ubuntu1_amd64.deb ... ==> default: Unpacking libcups2:amd64 (1.7.2-0ubuntu1) ... ==> default: Selecting previously unselected package libjpeg-turbo8:amd64. ==> default: Preparing to unpack .../libjpeg-turbo8_1.3.0-0ubuntu2_amd64.deb ... ==> default: Unpacking libjpeg-turbo8:amd64 (1.3.0-0ubuntu2) ... ==> default: Selecting previously unselected package libjpeg8:amd64. ==> default: Preparing to unpack .../libjpeg8_8c-2ubuntu8_amd64.deb ... ==> default: Unpacking libjpeg8:amd64 (8c-2ubuntu8) ... ==> default: Selecting previously unselected package libjbig0:amd64. ==> default: Preparing to unpack .../libjbig0_2.0-2ubuntu4_amd64.deb ... ==> default: Unpacking libjbig0:amd64 (2.0-2ubuntu4) ... ==> default: Selecting previously unselected package libtiff5:amd64. ==> default: Preparing to unpack .../libtiff5_4.0.3-7_amd64.deb ... ==> default: Unpacking libtiff5:amd64 (4.0.3-7) ... ==> default: Selecting previously unselected package libcupsfilters1:amd64. ==> default: Preparing to unpack .../libcupsfilters1_1.0.52-0ubuntu1_amd64.deb ... ==> default: Unpacking libcupsfilters1:amd64 (1.0.52-0ubuntu1) ... ==> default: Selecting previously unselected package libcupsimage2:amd64. ==> default: Preparing to unpack .../libcupsimage2_1.7.2-0ubuntu1_amd64.deb ... ==> default: Unpacking libcupsimage2:amd64 (1.7.2-0ubuntu1) ... ==> default: Selecting previously unselected package libfftw3-double3:amd64. ==> default: Preparing to unpack .../libfftw3-double3_3.3.3-7ubuntu3_amd64.deb ... ==> default: Unpacking libfftw3-double3:amd64 (3.3.3-7ubuntu3) ... ==> default: Selecting previously unselected package fonts-dejavu-core. ==> default: Preparing to unpack .../fonts-dejavu-core_2.34-1ubuntu1_all.deb ... ==> default: Unpacking fonts-dejavu-core (2.34-1ubuntu1) ... ==> default: Selecting previously unselected package fontconfig-config. ==> default: Preparing to unpack .../fontconfig-config_2.11.0-0ubuntu4_all.deb ... ==> default: Unpacking fontconfig-config (2.11.0-0ubuntu4) ... ==> default: Selecting previously unselected package libfontconfig1:amd64. ==> default: Preparing to unpack .../libfontconfig1_2.11.0-0ubuntu4_amd64.deb ... ==> default: Unpacking libfontconfig1:amd64 (2.11.0-0ubuntu4) ... ==> default: Selecting previously unselected package libvpx1:amd64. ==> default: Preparing to unpack .../libvpx1_1.3.0-2_amd64.deb ... ==> default: Unpacking libvpx1:amd64 (1.3.0-2) ... ==> default: Selecting previously unselected package libxpm4:amd64. ==> default: Preparing to unpack .../libxpm4_1%3a3.5.10-1_amd64.deb ... ==> default: Unpacking libxpm4:amd64 (1:3.5.10-1) ... ==> default: Selecting previously unselected package libgd3:amd64. ==> default: Preparing to unpack .../libgd3_2.1.0-3_amd64.deb ... ==> default: Unpacking libgd3:amd64 (2.1.0-3) ... ==> default: Selecting previously unselected package libicu52:amd64. ==> default: Preparing to unpack .../libicu52_52.1-3_amd64.deb ... ==> default: Unpacking libicu52:amd64 (52.1-3) ... ==> default: Selecting previously unselected package libjasper1:amd64. ==> default: Preparing to unpack .../libjasper1_1.900.1-14ubuntu3_amd64.deb ... ==> default: Unpacking libjasper1:amd64 (1.900.1-14ubuntu3) ... ==> default: Selecting previously unselected package liblcms2-2:amd64. ==> default: Preparing to unpack .../liblcms2-2_2.5-0ubuntu4_amd64.deb ... ==> default: Unpacking liblcms2-2:amd64 (2.5-0ubuntu4) ... ==> default: Selecting previously unselected package liblqr-1-0:amd64. ==> default: Preparing to unpack .../liblqr-1-0_0.4.1-2ubuntu1_amd64.deb ... ==> default: Unpacking liblqr-1-0:amd64 (0.4.1-2ubuntu1) ... ==> default: Selecting previously unselected package libltdl7:amd64. ==> default: Preparing to unpack .../libltdl7_2.4.2-1.7ubuntu1_amd64.deb ... ==> default: Unpacking libltdl7:amd64 (2.4.2-1.7ubuntu1) ... ==> default: Selecting previously unselected package libmagickcore5:amd64. ==> default: Preparing to unpack .../libmagickcore5_8%3a6.7.7.10-6ubuntu3_amd64.deb ... ==> default: Unpacking libmagickcore5:amd64 (8:6.7.7.10-6ubuntu3) ... ==> default: Selecting previously unselected package libmagickwand5:amd64. ==> default: Preparing to unpack .../libmagickwand5_8%3a6.7.7.10-6ubuntu3_amd64.deb ... ==> default: Unpacking libmagickwand5:amd64 (8:6.7.7.10-6ubuntu3) ... ==> default: Selecting previously unselected package libpaper1:amd64. ==> default: Preparing to unpack .../libpaper1_1.1.24+nmu2ubuntu3_amd64.deb ... ==> default: Unpacking libpaper1:amd64 (1.1.24+nmu2ubuntu3) ... ==> default: Selecting previously unselected package libxslt1.1:amd64. ==> default: Preparing to unpack .../libxslt1.1_1.1.28-2build1_amd64.deb ... ==> default: Unpacking libxslt1.1:amd64 (1.1.28-2build1) ... ==> default: Selecting previously unselected package php5-json. ==> default: Preparing to unpack .../php5-json_1.3.2-2build1_amd64.deb ... ==> default: Unpacking php5-json (1.3.2-2build1) ... ==> default: Selecting previously unselected package php5-common. ==> default: Preparing to unpack .../php5-common_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-common (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package php5-curl. ==> default: Preparing to unpack .../php5-curl_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-curl (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package php5-fpm. ==> default: Preparing to unpack .../php5-fpm_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-fpm (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package php5-gd. ==> default: Preparing to unpack .../php5-gd_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-gd (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package php5-intl. ==> default: Preparing to unpack .../php5-intl_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-intl (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package php5-mysql. ==> default: Preparing to unpack .../php5-mysql_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-mysql (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package php5-cli. ==> default: Preparing to unpack .../php5-cli_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-cli (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package php5-readline. ==> default: Preparing to unpack .../php5-readline_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-readline (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package php5-xsl. ==> default: Preparing to unpack .../php5-xsl_5.5.9+dfsg-1ubuntu4_amd64.deb ... ==> default: Unpacking php5-xsl (5.5.9+dfsg-1ubuntu4) ... ==> default: Selecting previously unselected package poppler-data. ==> default: Preparing to unpack .../poppler-data_0.4.6-4_all.deb ... ==> default: Unpacking poppler-data (0.4.6-4) ... ==> default: Selecting previously unselected package libijs-0.35. ==> default: Preparing to unpack .../libijs-0.35_0.35-8build1_amd64.deb ... ==> default: Unpacking libijs-0.35 (0.35-8build1) ... ==> default: Selecting previously unselected package libjbig2dec0. ==> default: Preparing to unpack .../libjbig2dec0_0.11+20120125-1ubuntu1_amd64.deb ... ==> default: Unpacking libjbig2dec0 (0.11+20120125-1ubuntu1) ... ==> default: Selecting previously unselected package libgs9-common. ==> default: Preparing to unpack .../libgs9-common_9.10~dfsg-0ubuntu10_all.deb ... ==> default: Unpacking libgs9-common (9.10~dfsg-0ubuntu10) ... ==> default: Selecting previously unselected package libgs9. ==> default: Preparing to unpack .../libgs9_9.10~dfsg-0ubuntu10_amd64.deb ... ==> default: Unpacking libgs9 (9.10~dfsg-0ubuntu10) ... ==> default: Selecting previously unselected package gsfonts. ==> default: Preparing to unpack .../gsfonts_1%3a8.11+urwcyr1.0.7~pre44-4.2ubuntu1_all.deb ... ==> default: Unpacking gsfonts (1:8.11+urwcyr1.0.7~pre44-4.2ubuntu1) ... ==> default: Selecting previously unselected package ghostscript. ==> default: Preparing to unpack .../ghostscript_9.10~dfsg-0ubuntu10_amd64.deb ... ==> default: Unpacking ghostscript (9.10~dfsg-0ubuntu10) ... ==> default: Selecting previously unselected package libmcrypt4. ==> default: Preparing to unpack .../libmcrypt4_2.5.8-3.1ubuntu1_amd64.deb ... ==> default: Unpacking libmcrypt4 (2.5.8-3.1ubuntu1) ... ==> default: Selecting previously unselected package libpaper-utils. ==> default: Preparing to unpack .../libpaper-utils_1.1.24+nmu2ubuntu3_amd64.deb ... ==> default: Unpacking libpaper-utils (1.1.24+nmu2ubuntu3) ... ==> default: Selecting previously unselected package php5-imagick. ==> default: Preparing to unpack .../php5-imagick_3.1.2-1build1_amd64.deb ... ==> default: Unpacking php5-imagick (3.1.2-1build1) ... ==> default: Selecting previously unselected package php5-mcrypt. ==> default: Preparing to unpack .../php5-mcrypt_5.4.6-0ubuntu5_amd64.deb ... ==> default: Unpacking php5-mcrypt (5.4.6-0ubuntu5) ... ==> default: Selecting previously unselected package php5-redis. ==> default: Preparing to unpack .../php5-redis_2.2.4-1build2_amd64.deb ... ==> default: Unpacking php5-redis (2.2.4-1build2) ... ==> default: Selecting previously unselected package ttf-dejavu-core. ==> default: Preparing to unpack .../ttf-dejavu-core_2.34-1ubuntu1_all.deb ... ==> default: Unpacking ttf-dejavu-core (2.34-1ubuntu1) ... ==> default: Processing triggers for man-db (2.6.7.1-1) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Setting up imagemagick-common (8:6.7.7.10-6ubuntu3) ... ==> default: Setting up libavahi-common-data:amd64 (0.6.31-4ubuntu1) ... ==> default: Setting up libavahi-common3:amd64 (0.6.31-4ubuntu1) ... ==> default: Setting up libavahi-client3:amd64 (0.6.31-4ubuntu1) ... ==> default: Setting up libcups2:amd64 (1.7.2-0ubuntu1) ... ==> default: Setting up libjpeg-turbo8:amd64 (1.3.0-0ubuntu2) ... ==> default: Setting up libjpeg8:amd64 (8c-2ubuntu8) ... ==> default: Setting up libjbig0:amd64 (2.0-2ubuntu4) ... ==> default: Setting up libtiff5:amd64 (4.0.3-7) ... ==> default: Setting up libcupsfilters1:amd64 (1.0.52-0ubuntu1) ... ==> default: Setting up libcupsimage2:amd64 (1.7.2-0ubuntu1) ... ==> default: Setting up libfftw3-double3:amd64 (3.3.3-7ubuntu3) ... ==> default: Setting up fonts-dejavu-core (2.34-1ubuntu1) ... ==> default: Setting up fontconfig-config (2.11.0-0ubuntu4) ... ==> default: Setting up libfontconfig1:amd64 (2.11.0-0ubuntu4) ... ==> default: Setting up libvpx1:amd64 (1.3.0-2) ... ==> default: Setting up libxpm4:amd64 (1:3.5.10-1) ... ==> default: Setting up libgd3:amd64 (2.1.0-3) ... ==> default: Setting up libicu52:amd64 (52.1-3) ... ==> default: Setting up libjasper1:amd64 (1.900.1-14ubuntu3) ... ==> default: Setting up liblcms2-2:amd64 (2.5-0ubuntu4) ... ==> default: Setting up liblqr-1-0:amd64 (0.4.1-2ubuntu1) ... ==> default: Setting up libltdl7:amd64 (2.4.2-1.7ubuntu1) ... ==> default: Setting up libmagickcore5:amd64 (8:6.7.7.10-6ubuntu3) ... ==> default: Setting up libmagickwand5:amd64 (8:6.7.7.10-6ubuntu3) ... ==> default: Setting up libpaper1:amd64 (1.1.24+nmu2ubuntu3) ... ==> default: ==> default: Creating config file /etc/papersize with new version ==> default: Setting up libxslt1.1:amd64 (1.1.28-2build1) ... ==> default: Setting up poppler-data (0.4.6-4) ... ==> default: Setting up libijs-0.35 (0.35-8build1) ... ==> default: Setting up libjbig2dec0 (0.11+20120125-1ubuntu1) ... ==> default: Setting up libgs9-common (9.10~dfsg-0ubuntu10) ... ==> default: update-alternatives: using /usr/share/ghostscript/9.10 to provide /usr/share/ghostscript/current (ghostscri pt-current) in auto mode ==> default: Setting up libgs9 (9.10~dfsg-0ubuntu10) ... ==> default: Setting up gsfonts (1:8.11+urwcyr1.0.7~pre44-4.2ubuntu1) ... ==> default: Setting up ghostscript (9.10~dfsg-0ubuntu10) ... ==> default: Setting up libmcrypt4 (2.5.8-3.1ubuntu1) ... ==> default: Setting up libpaper-utils (1.1.24+nmu2ubuntu3) ... ==> default: Setting up ttf-dejavu-core (2.34-1ubuntu1) ... ==> default: Setting up php5-common (5.5.9+dfsg-1ubuntu4) ... ==> default: Creating config file /etc/php5/mods-available/pdo.ini with new version ==> default: php5_invoke: Enable module pdo for fpm SAPI ==> default: php5_invoke: Enable module pdo for cli SAPI ==> default: ==> default: Creating config file /etc/php5/mods-available/opcache.ini with new version ==> default: php5_invoke: Enable module opcache for fpm SAPI ==> default: php5_invoke: Enable module opcache for cli SAPI ==> default: Setting up php5-curl (5.5.9+dfsg-1ubuntu4) ... ==> default: ==> default: Creating config file /etc/php5/mods-available/curl.ini with new version ==> default: php5_invoke: Enable module curl for fpm SAPI ==> default: php5_invoke: Enable module curl for cli SAPI ==> default: Setting up php5-fpm (5.5.9+dfsg-1ubuntu4) ... ==> default: ==> default: Creating config file /etc/php5/fpm/php.ini with new version ==> default: php5_invoke curl: already enabled for fpm SAPI ==> default: php5_invoke pdo: already enabled for fpm SAPI ==> default: php5_invoke opcache: already enabled for fpm SAPI ==> default: php5-fpm start/running, process 9885 ==> default: Setting up php5-gd (5.5.9+dfsg-1ubuntu4) ... ==> default: ==> default: Creating config file /etc/php5/mods-available/gd.ini with new version ==> default: php5_invoke: Enable module gd for fpm SAPI ==> default: php5_invoke: Enable module gd for cli SAPI ==> default: Setting up php5-intl (5.5.9+dfsg-1ubuntu4) ... ==> default: Creating config file /etc/php5/mods-available/intl.ini with new version ==> default: php5_invoke: Enable module intl for fpm SAPI ==> default: php5_invoke: Enable module intl for cli SAPI ==> default: Setting up php5-mysql (5.5.9+dfsg-1ubuntu4) ... ==> default: ==> default: Creating config file /etc/php5/mods-available/mysql.ini with new version ==> default: php5_invoke: Enable module mysql for fpm SAPI ==> default: php5_invoke: Enable module mysql for cli SAPI ==> default: Creating config file /etc/php5/mods-available/mysqli.ini with new version ==> default: php5_invoke: Enable module mysqli for fpm SAPI ==> default: php5_invoke: Enable module mysqli for cli SAPI ==> default: Creating config file /etc/php5/mods-available/pdo_mysql.ini with new version ==> default: php5_invoke: Enable module pdo_mysql for fpm SAPI ==> default: php5_invoke: Enable module pdo_mysql for cli SAPI ==> default: Setting up php5-cli (5.5.9+dfsg-1ubuntu4) ... ==> default: update-alternatives: using /usr/bin/php5 to provide /usr/bin/php (php) in auto mode ==> default: Creating config file /etc/php5/cli/php.ini with new version ==> default: php5_invoke curl: already enabled for cli SAPI ==> default: php5_invoke mysqli: already enabled for cli SAPI ==> default: php5_invoke pdo: already enabled for cli SAPI ==> default: php5_invoke pdo_mysql: already enabled for cli SAPI ==> default: php5_invoke intl: already enabled for cli SAPI ==> default: php5_invoke mysql: already enabled for cli SAPI ==> default: php5_invoke gd: already enabled for cli SAPI ==> default: php5_invoke opcache: already enabled for cli SAPI ==> default: Setting up php5-readline (5.5.9+dfsg-1ubuntu4) ... ==> default: ==> default: Creating config file /etc/php5/mods-available/readline.ini with new version ==> default: php5_invoke: Enable module readline for fpm SAPI ==> default: php5_invoke: Enable module readline for cli SAPI ==> default: Setting up php5-xsl (5.5.9+dfsg-1ubuntu4) ... ==> default: ==> default: Creating config file /etc/php5/mods-available/xsl.ini with new version ==> default: php5_invoke: Enable module xsl for fpm SAPI ==> default: php5_invoke: Enable module xsl for cli SAPI ==> default: Setting up php5-imagick (3.1.2-1build1) ... ==> default: php5_invoke: Enable module imagick for fpm SAPI ==> default: php5_invoke: Enable module imagick for cli SAPI ==> default: Setting up php5-mcrypt (5.4.6-0ubuntu5) ... ==> default: Setting up php5-redis (2.2.4-1build2) ... ==> default: php5_invoke: Enable module redis for fpm SAPI ==> default: php5_invoke: Enable module redis for cli SAPI ==> default: Setting up php5-json (1.3.2-2build1) ... ==> default: php5_invoke: Enable module json for fpm SAPI ==> default: php5_invoke: Enable module json for cli SAPI ==> default: Processing triggers for libc-bin (2.19-0ubuntu6) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Processing triggers for php5-fpm (5.5.9+dfsg-1ubuntu4) ... ==> default: php5-fpm stop/waiting ==> default: php5-fpm start/running, process 11756 ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: nginx-common nginx-core ==> default: Suggested packages: ==> default: fcgiwrap nginx-doc ==> default: The following NEW packages will be installed: ==> default: nginx nginx-common nginx-core ==> default: 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. ==> default: Need to get 348 kB of archives. ==> default: After this operation, 1,295 kB of additional disk space will be used. ==> default: Get:1 http://us.archive.ubuntu.com/ubuntu/ trusty/main nginx-common all 1.4.6-1ubuntu3 [18.1 kB] ==> default: Get:2 http://us.archive.ubuntu.com/ubuntu/ trusty/main nginx-core amd64 1.4.6-1ubuntu3 [324 kB] ==> default: Get:3 http://us.archive.ubuntu.com/ubuntu/ trusty/main nginx all 1.4.6-1ubuntu3 [5,586 B] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 348 kB in 6s (56.8 kB/s) ==> default: Selecting previously unselected package nginx-common. ==> default: (Reading database ... 77125 files and directories currently installed.) ==> default: Preparing to unpack .../nginx-common_1.4.6-1ubuntu3_all.deb ... ==> default: Unpacking nginx-common (1.4.6-1ubuntu3) ... ==> default: Selecting previously unselected package nginx-core. ==> default: Preparing to unpack .../nginx-core_1.4.6-1ubuntu3_amd64.deb ... ==> default: Unpacking nginx-core (1.4.6-1ubuntu3) ... ==> default: Selecting previously unselected package nginx. ==> default: Preparing to unpack .../nginx_1.4.6-1ubuntu3_all.deb ... ==> default: Unpacking nginx (1.4.6-1ubuntu3) ... ==> default: Processing triggers for man-db (2.6.7.1-1) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Processing triggers for ufw (0.34~rc-0ubuntu2) ... ==> default: Setting up nginx-common (1.4.6-1ubuntu3) ... ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: Processing triggers for ufw (0.34~rc-0ubuntu2) ... ==> default: Setting up nginx-core (1.4.6-1ubuntu3) ... ==> default: Setting up nginx (1.4.6-1ubuntu3) ... ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: ==> default: Reading state information... ==> default: The following extra packages will be installed: ==> default: ca-certificates-java icedtea-7-jre-jamvm java-common libnspr4 libnss3 ==> default: libnss3-1d libnss3-nssdb libpcsclite1 tzdata-java ==> default: Suggested packages: ==> default: default-jre equivs pcscd libnss-mdns sun-java6-fonts fonts-dejavu-extra ==> default: fonts-ipafont-gothic fonts-ipafont-mincho ttf-wqy-microhei ttf-wqy-zenhei ==> default: ttf-indic-fonts-core ttf-telugu-fonts ttf-oriya-fonts ttf-kannada-fonts ==> default: ttf-bengali-fonts ==> default: The following NEW packages will be installed: ==> default: ca-certificates-java icedtea-7-jre-jamvm java-common libnspr4 libnss3 ==> default: libnss3-1d libnss3-nssdb libpcsclite1 openjdk-7-jre-headless tzdata-java ==> default: 0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded. ==> default: Need to get 41.2 MB of archives. ==> default: After this operation, 64.1 MB of additional disk space will be used. ==> default: Get:1 http://us.archive.ubuntu.com/ubuntu/ trusty/main libnspr4 amd64 2:4.10.2-1ubuntu1 [110 kB] ==> default: Get:2 http://us.archive.ubuntu.com/ubuntu/ trusty/main libnss3-nssdb all 2:3.15.4-1ubuntu7 [10.6 kB] ==> default: Get:3 http://us.archive.ubuntu.com/ubuntu/ trusty/main libnss3 amd64 2:3.15.4-1ubuntu7 [1,081 kB] ==> default: Get:4 http://us.archive.ubuntu.com/ubuntu/ trusty/main libpcsclite1 amd64 1.8.10-1ubuntu1 [20.9 kB] ==> default: Get:5 http://us.archive.ubuntu.com/ubuntu/ trusty/main ca-certificates-java all 20130815ubuntu1 [13.4 kB] ==> default: Get:6 http://us.archive.ubuntu.com/ubuntu/ trusty/main tzdata-java all 2014b-1 [72.0 kB] ==> default: Get:7 http://us.archive.ubuntu.com/ubuntu/ trusty/main java-common all 0.51 [130 kB] ==> default: Get:8 http://us.archive.ubuntu.com/ubuntu/ trusty/main libnss3-1d amd64 2:3.15.4-1ubuntu7 [9,298 B] ==> default: Get:9 http://us.archive.ubuntu.com/ubuntu/ trusty/main openjdk-7-jre-headless amd64 7u51-2.4.6-1ubuntu4 [39 .3 MB] ==> default: Get:10 http://us.archive.ubuntu.com/ubuntu/ trusty/main icedtea-7-jre-jamvm amd64 7u51-2.4.6-1ubuntu4 [426 kB] ==> default: dpkg-preconfigure: unable to re-open stdin: No such file or directory ==> default: Fetched 41.2 MB in 1min 5s (631 kB/s) ==> default: Selecting previously unselected package libnspr4:amd64. ==> default: (Reading database ... 77170 files and directories currently installed.) ==> default: Preparing to unpack .../libnspr4_2%3a4.10.2-1ubuntu1_amd64.deb ... ==> default: Unpacking libnspr4:amd64 (2:4.10.2-1ubuntu1) ... ==> default: Selecting previously unselected package libnss3-nssdb. ==> default: Preparing to unpack .../libnss3-nssdb_2%3a3.15.4-1ubuntu7_all.deb ... ==> default: Unpacking libnss3-nssdb (2:3.15.4-1ubuntu7) ... ==> default: Selecting previously unselected package libnss3:amd64. ==> default: Preparing to unpack .../libnss3_2%3a3.15.4-1ubuntu7_amd64.deb ... ==> default: Unpacking libnss3:amd64 (2:3.15.4-1ubuntu7) ... ==> default: Selecting previously unselected package libpcsclite1:amd64. ==> default: Preparing to unpack .../libpcsclite1_1.8.10-1ubuntu1_amd64.deb ... ==> default: Unpacking libpcsclite1:amd64 (1.8.10-1ubuntu1) ... ==> default: Selecting previously unselected package ca-certificates-java. ==> default: Preparing to unpack .../ca-certificates-java_20130815ubuntu1_all.deb ... ==> default: Unpacking ca-certificates-java (20130815ubuntu1) ... ==> default: Selecting previously unselected package tzdata-java. ==> default: Preparing to unpack .../tzdata-java_2014b-1_all.deb ... ==> default: Unpacking tzdata-java (2014b-1) ... ==> default: Selecting previously unselected package java-common. ==> default: Preparing to unpack .../java-common_0.51_all.deb ... ==> default: Unpacking java-common (0.51) ... ==> default: Selecting previously unselected package libnss3-1d:amd64. ==> default: Preparing to unpack .../libnss3-1d_2%3a3.15.4-1ubuntu7_amd64.deb ... ==> default: Unpacking libnss3-1d:amd64 (2:3.15.4-1ubuntu7) ... ==> default: Selecting previously unselected package openjdk-7-jre-headless:amd64. ==> default: Preparing to unpack .../openjdk-7-jre-headless_7u51-2.4.6-1ubuntu4_amd64.deb ... ==> default: Unpacking openjdk-7-jre-headless:amd64 (7u51-2.4.6-1ubuntu4) ... ==> default: Selecting previously unselected package icedtea-7-jre-jamvm:amd64. ==> default: Preparing to unpack .../icedtea-7-jre-jamvm_7u51-2.4.6-1ubuntu4_amd64.deb ... ==> default: Unpacking icedtea-7-jre-jamvm:amd64 (7u51-2.4.6-1ubuntu4) ... ==> default: Processing triggers for ca-certificates (20130906ubuntu2) ... ==> default: Updating certificates in /etc/ssl/certs... ==> default: 0 added, 0 removed; done. ==> default: Running hooks in /etc/ca-certificates/update.d.... ==> default: done. ==> default: Processing triggers for man-db (2.6.7.1-1) ... ==> default: Setting up libnspr4:amd64 (2:4.10.2-1ubuntu1) ... ==> default: Setting up libpcsclite1:amd64 (1.8.10-1ubuntu1) ... ==> default: Setting up tzdata-java (2014b-1) ... ==> default: Setting up java-common (0.51) ... ==> default: Setting up libnss3-nssdb (2:3.15.4-1ubuntu7) ... ==> default: Setting up libnss3:amd64 (2:3.15.4-1ubuntu7) ... ==> default: Setting up libnss3-1d:amd64 (2:3.15.4-1ubuntu7) ... ==> default: Setting up ca-certificates-java (20130815ubuntu1) ... ==> default: Adding debian:NetLockExpress=Class_C=_Root.pem ==> default: Adding debian:GeoTrust_Primary_Certification_Authority.pem ==> default: Adding debian:Sonera_Class_1_Root_CA.pem ==> default: Adding debian:Buypass_Class_3_CA_1.pem ==> default: Adding debian:Swisscom_Root_CA_2.pem ==> default: Adding debian:thawte_Primary_RootCA-_G3.pem ==> default: Adding debian:GeoTrust_Global_CA_2.pem ==> default: Adding debian:CA_Disig_Root_R1.pem ==> default: Adding debian:ComSign_CA.pem ==> default: Adding debian:AffirmTrust_Premium.pem ==> default: Adding debian:GeoTrust_Global_CA.pem ==> default: Adding debian:Certum_Root_CA.pem ==> default: Adding debian:DST_Root_CA_X3.pem ==> default: Adding debian:T??B??TAK_UEKAE_K??k_Sertifika_HizmetSa??lay??c??s??-_S??r??m_3.pem ==> default: Adding debian:Verisign_Class_1_Public_Primary_Certification_Authority.pem ==> default: Adding debian:DigiCert_Assured_ID_Root_CA.pem ==> default: Adding debian:EC-ACC.pem ==> default: Adding debian:TDC_OCES_Root_CA.pem ==> default: Adding debian:COMODO_Certification_Authority.pem ==> default: Adding debian:CA_Disig_Root_R2.pem ==> default: Adding debian:SecureSign_RootCA11.pem ==> default: Adding debian:Buypass_Class_2_CA_1.pem ==> default: Adding debian:S-TRUST_Authentication_and_Encryption_Root_CA_2005_PN.pem ==> default: Adding debian:Chambers_of_CommerceRoot-_2008.pem ==> default: Adding debian:AffirmTrust_Premium_ECC.pem ==> default: Adding debian:SwissSign_GoldCA-_G2.pem ==> default: Adding debian:TC_TrustCenter_Universal_CA_I.pem ==> default: Adding debian:Equifax_Secure_Global_eBusiness_CA.pem ==> default: Adding debian:Staat_der_Nederlanden_RootCA-_G2.pem ==> default: Adding debian:Baltimore_CyberTrust_Root.pem ==> default: Adding debian:VeriSign_Class_3_Public_Primary_CertificationAuthority-_G4.pem ==> default: Adding debian:UTN_USERFirst_Hardware_Root_CA.pem ==> default: Adding debian:ACEDICOM_Root.pem ==> default: Adding debian:Go_Daddy_Root_CertificateAuthority-_G2.pem ==> default: Adding debian:Entrust.net_Secure_Server_CA.pem ==> default: Adding debian:QuoVadis_Root_CA_3.pem ==> default: Adding debian:Root_CA_Generalitat_Valenciana.pem ==> default: Adding debian:Actalis_Authentication_Root_CA.pem ==> default: Adding debian:GeoTrust_Universal_CA_2.pem ==> default: Adding debian:ValiCert_Class_1_VA.pem ==> default: Adding debian:EBG_Elektronik_Sertifika_Hizmet_Sa??lay??c??s??.pem ==> default: Adding debian:America_Online_Root_Certification_Authority_1.pem ==> default: Adding debian:Comodo_Secure_Services_root.pem ==> default: Adding debian:TURKTRUST_Certificate_Services_Provider_Root_2.pem ==> default: Adding debian:QuoVadis_Root_CA_2.pem ==> default: Adding debian:XRamp_Global_CA_Root.pem ==> default: Adding debian:Secure_Global_CA.pem ==> default: Adding debian:GeoTrust_Universal_CA.pem ==> default: Adding debian:Hellenic_Academic_and_Research_Institutions_RootCA_2011.pem ==> default: Adding debian:Staat_der_Nederlanden_Root_CA.pem ==> default: Adding debian:Verisign_Class_3_Public_Primary_Certification_Authority.pem ==> default: Adding debian:NetLockNotary=Class_A=_Root.pem ==> default: Adding debian:Digital_Signature_Trust_Co._Global_CA_1.pem ==> default: Adding debian:ValiCert_Class_2_VA.pem ==> default: Adding debian:Buypass_Class_2_RootCA.pem ==> default: Adding debian:ApplicationCA-_Japanese_Government.pem ==> default: Adding debian:EE_Certification_Centre_Root_CA.pem ==> default: Adding debian:certSIGN_ROOT_CA.pem ==> default: Adding debian:Verisign_Class_4_Public_Primary_CertificationAuthority-_G3.pem ==> default: Adding debian:Swisscom_Root_EV_CA_2.pem ==> default: Adding debian:RSA_Root_Certificate_1.pem ==> default: Adding debian:Verisign_Class_1_Public_Primary_CertificationAuthority-_G3.pem ==> default: Adding debian:spi-cacert-2008.pem ==> default: Adding debian:Thawte_Server_CA.pem ==> default: Adding debian:thawte_Primary_Root_CA.pem ==> default: Adding debian:Camerfirma_Chambers_of_Commerce_Root.pem ==> default: Adding debian:DigiCert_Global_Root_CA.pem ==> default: Adding debian:AddTrust_External_Root.pem ==> default: Adding debian:Certplus_Class_2_Primary_CA.pem ==> default: Adding debian:Juur-SK.pem ==> default: Adding debian:StartCom_Certification_Authority_G2.pem ==> default: Adding debian:Camerfirma_Global_Chambersign_Root.pem ==> default: Adding debian:CNNIC_ROOT.pem ==> default: Adding debian:E-Guven_Kok_Elektronik_Sertifika_Hizmet_Saglayicisi.pem ==> default: Adding debian:Visa_eCommerce_Root.pem ==> default: Adding debian:DigiCert_High_Assurance_EV_Root_CA.pem ==> default: Adding debian:WellsSecure_Public_Root_Certificate_Authority.pem ==> default: Adding debian:UTN_USERFirst_Email_Root_CA.pem ==> default: Adding debian:China_Internet_Network_Information_Center_EV_Certificates_Root.pem ==> default: Adding debian:Izenpe.com.pem ==> default: Adding debian:Wells_Fargo_Root_CA.pem ==> default: Adding debian:D-TRUST_Root_Class_3_CA_2_2009.pem ==> default: Adding debian:VeriSign_Class_3_Public_Primary_CertificationAuthority-_G5.pem ==> default: Adding debian:Go_Daddy_Class_2_CA.pem ==> default: Adding debian:UTN_DATACorp_SGC_Root_CA.pem ==> default: Adding debian:TURKTRUST_Certificate_Services_Provider_Root_1.pem ==> default: Adding debian:NetLockArany=Class_Gold=_F??tan??s??tv??ny.pem ==> default: Adding debian:Cybertrust_Global_Root.pem ==> default: Adding debian:Digital_Signature_Trust_Co._Global_CA_3.pem ==> default: Adding debian:TC_TrustCenter_Class_3_CA_II.pem ==> default: Adding debian:Verisign_Class_3_Public_Primary_Certification_Authority_2.pem ==> default: Adding debian:Hongkong_Post_Root_CA_1.pem ==> default: Adding debian:Certigna.pem ==> default: Adding debian:Microsec_e-Szigno_Root_CA_2009.pem ==> default: Adding debian:Starfield_Root_CertificateAuthority-_G2.pem ==> default: Adding debian:ePKI_Root_Certification_Authority.pem ==> default: Adding debian:D-TRUST_Root_Class_3_CA_2_EV_2009.pem ==> default: Adding debian:GeoTrust_Primary_CertificationAuthority-_G2.pem ==> default: Adding debian:GlobalSign_RootCA-_R2.pem ==> default: Adding debian:Sonera_Class_2_Root_CA.pem ==> default: Adding debian:T-TeleSec_GlobalRoot_Class_3.pem ==> default: Adding debian:Trustis_FPS_Root_CA.pem ==> default: Adding debian:AC_Ra??z_Certic??mara_S.A..pem ==> default: Adding debian:GlobalSign_Root_CA.pem ==> default: Adding debian:StartCom_Certification_Authority_2.pem ==> default: Adding debian:TURKTRUST_Certificate_Services_Provider_Root2007.pem ==> default: Adding debian:Certinomis-_Autorit??_Racine.pem ==> default: Adding debian:AddTrust_Public_Services_Root.pem ==> default: Adding debian:TDC_Internet_Root_CA.pem ==> default: Adding debian:Starfield_Services_Root_CertificateAuthority-_G2.pem ==> default: Adding debian:Comodo_AAA_Services_root.pem ==> default: Adding debian:PSCProcert.pem ==> default: Adding debian:Network_Solutions_Certificate_Authority.pem ==> default: Adding debian:AffirmTrust_Networking.pem ==> default: Adding debian:SwissSign_PlatinumCA-_G2.pem ==> default: Adding debian:TWCA_Root_Certification_Authority.pem ==> default: Adding debian:thawte_Primary_RootCA-_G2.pem ==> default: Adding debian:GTE_CyberTrust_Global_Root.pem ==> default: Adding debian:Microsec_e-Szigno_Root_CA.pem ==> default: Adding debian:NetLockQualified=Class_QA=_Root.pem ==> default: Adding debian:Comodo_Trusted_Services_root.pem ==> default: Adding debian:Starfield_Class_2_CA.pem ==> default: Adding debian:Entrust_Root_Certification_Authority.pem ==> default: Adding debian:AddTrust_Low-Value_Services_Root.pem ==> default: Adding debian:Verisign_Class_2_Public_Primary_CertificationAuthority-_G3.pem ==> default: Adding debian:Equifax_Secure_CA.pem ==> default: Adding debian:QuoVadis_Root_CA.pem ==> default: Adding debian:SecureTrust_CA.pem ==> default: Adding debian:Global_ChambersignRoot-_2008.pem ==> default: Adding debian:Entrust.net_Premium_2048_Secure_Server_CA.pem ==> default: Adding debian:Certum_Trusted_Network_CA.pem ==> default: Adding debian:IGC_A.pem ==> default: Adding debian:Security_Communication_EV_RootCA1.pem ==> default: Adding debian:Verisign_Class_3_Public_Primary_CertificationAuthority-_G3.pem ==> default: Adding debian:Verisign_Class_1_Public_Primary_CertificationAuthority-_G2.pem ==> default: Adding debian:VeriSign_Universal_Root_Certification_Authority.pem ==> default: Adding debian:Equifax_Secure_eBusiness_CA_1.pem ==> default: Adding debian:OISTE_WISeKey_Global_Root_GA_CA.pem ==> default: Adding debian:Security_Communication_Root_CA.pem ==> default: Adding debian:Taiwan_GRCA.pem ==> default: Adding debian:ComSign_Secured_CA.pem ==> default: Adding debian:RSA_Security_2048_v3.pem ==> default: Adding debian:Swisscom_Root_CA_1.pem ==> default: Adding debian:StartCom_Certification_Authority.pem ==> default: Adding debian:Autoridad_de_Certificacion_Firmaprofesional_CIF_A62634068.pem ==> default: Adding debian:COMODO_ECC_Certification_Authority.pem ==> default: Adding debian:A-Trust-nQual-03.pem ==> default: Adding debian:Verisign_Class_3_Public_Primary_CertificationAuthority-_G2.pem ==> default: Adding debian:SwissSign_SilverCA-_G2.pem ==> default: Adding debian:Deutsche_Telekom_Root_CA_2.pem ==> default: Adding debian:Buypass_Class_3_Root_CA.pem ==> default: Adding debian:America_Online_Root_Certification_Authority_2.pem ==> default: Adding debian:Verisign_Class_2_Public_Primary_CertificationAuthority-_G2.pem ==> default: Adding debian:Firmaprofesional_Root_CA.pem ==> default: Adding debian:CA_Disig.pem ==> default: Adding debian:Security_Communication_RootCA2.pem ==> default: Adding debian:AddTrust_Qualified_Certificates_Root.pem ==> default: Adding debian:GeoTrust_Primary_CertificationAuthority-_G3.pem ==> default: Adding debian:TC_TrustCenter_Class_2_CA_II.pem ==> default: Adding debian:GlobalSign_RootCA-_R3.pem ==> default: Adding debian:Thawte_Premium_Server_CA.pem ==> default: Adding debian:NetLockBusiness=Class_B=_Root.pem ==> default: Adding debian:DST_ACES_CA_X6.pem ==> default: Adding debian:AffirmTrust_Commercial.pem ==> default: done. ==> default: Setting up openjdk-7-jre-headless:amd64 (7u51-2.4.6-1ubuntu4) ... ==> default: update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java to provide /usr/bin/java (java) i n auto mode ==> default: update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/keytool to provide /usr/bin/keytool (k eytool) in auto mode ==> default: update-alternatives: ==> default: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/pack200 to provide /usr/bin/pack200 (pack200) in auto mode ==> default: update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/rmid to provide /usr/bin/rmid (rmid) i n auto mode ==> default: update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/rmiregistry to provide /usr/bin/rmireg istry (rmiregistry) in auto mode ==> default: update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/unpack200 to provide /usr/bin/unpack20 0 (unpack200) in auto mode ==> default: update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/orbd to provide /usr/bin/orbd (orbd) i n auto mode ==> default: update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/servertool to provide /usr/bin/servert ool (servertool) in auto mode ==> default: update-alternatives: using /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/tnameserv to provide /usr/bin/tnameser v (tnameserv) in auto mode ==> default: update-alternatives: ==> default: using /usr/lib/jvm/java-7-openjdk-amd64/jre/lib/jexec to provide /usr/bin/jexec (jexec) in auto mode ==> default: Setting up icedtea-7-jre-jamvm:amd64 (7u51-2.4.6-1ubuntu4) ... ==> default: Processing triggers for libc-bin (2.19-0ubuntu6) ... ==> default: Processing triggers for ca-certificates (20130906ubuntu2) ... ==> default: Updating certificates in /etc/ssl/certs... ==> default: 0 added, 0 removed; done. ==> default: Running hooks in /etc/ca-certificates/update.d.... ==> default: done. ==> default: done. ==> default: Selecting previously unselected package elasticsearch. ==> default: (Reading database ... 77952 files and directories currently installed.) ==> default: Preparing to unpack elasticsearch-1.3.1.deb ... ==> default: Unpacking elasticsearch (1.3.1) ... ==> default: Setting up elasticsearch (1.3.1) ... ==> default: Adding system user
elasticsearch' (UID 109) ... ==> default: Adding new userelasticsearch' (UID 109) with groupelasticsearch' ... ==> default: Not creating home directory/usr/share/elasticsearch'. ==> default: ### NOT starting elasticsearch by default on bootup, please execute ==> default: sudo update-rc.d elasticsearch defaults 95 10 ==> default: ### In order to start elasticsearch, execute ==> default: sudo /etc/init.d/elasticsearch start ==> default: Processing triggers for ureadahead (0.100.0-16) ... ==> default: * Starting Elasticsearch Server ==> default: ...done. ==> default: php5-fpm stop/waiting ==> default: php5-fpm start/running, process 14961 ==> default: * Restarting nginx nginx ==> default: ...done. ==> default: Reading package lists... ==> default: Building dependency tree... ==> default: ==> default: Reading state information... ==> default: redis-server is already the newest version. ==> default: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ==> default: #!/usr/bin/env php ==> default: All settings correct for using Composer ==> default: Downloading... ==> default: ==> default: Composer successfully installed to: /home/vagrant/composer.phar ==> default: ==> default: Use it: php composer.phar ==> default: Installing rbschange/change (dev-master 84ce6ba86750901f9259d67d9f9a49ab7cfe8be4) ==> default: - Installing rbschange/change (dev-master master) ==> default: Cloning master ==> default: Created project in /vagrant/c4 ==> default: Loading composer repositories with package information ==> default: Installing dependencies (including require-dev) ==> default: - Installing twig/twig (v1.15.1) ==> default: Downloading: connection... ==> default: ==> default: Downloading: 0% Downloading: 5% Downloading: 10% Downloading: 15% ==> default: ==> default: Downloading: 20% ==> default: ==> default: Downloading: 25% Downloading: 30% Downloading: 35% ==> default: ==> default: Downloading: 40% ==> default: ==> default: Downloading: 45% Downloading: 50% ==> default: ==> default: Downloading: 55% Downloading: 60% Downloading: 65% Downloading: 70% ==> default: ==> default: Downloading: 80% ==> default: ==> default: Downloading: 85% Downloading: 90% ==> default: ==> default: Downloading: 95% Downloading: 100% Downloading: 100% ==> default: - Installing ruflin/elastica (v1.1.1.1) ==> default: Downloading: connection... Downloading: 100% ==> default: ==> default: - Installing ircmaxell/password-compat (1.0.3) ==> default: Downloading: connection... Downloading: 0% ==> default: Downloading: 55% Downloading: 100% ==> default: - Installing michelf/php-markdown (1.4.1) ==> default: Downloading: connection... ==> default: ==> default: Downloading: 0% Downloading: 20% Downloading: 35% ==> default: ==> default: Downloading: 60% Downloading: 95% ==> default: ==> default: Downloading: 100% ==> default: - Installing symfony/process (dev-master ba2c477) ==> default: Cloning ba2c477082cf505c1721ea6e68010bb1fcfaef8b ==> default: - Installing kriswallsmith/assetic (v1.1.2) ==> default: Downloading: connection... ==> default: ==> default: Downloading: 0% Downloading: 5% Downloading: 15% ==> default: ==> default: Downloading: 20% Downloading: 25% Downloading: 30% Downloading: 35% Downloading: 40% ==> default: ==> default: Downloading: 45% ==> default: ==> default: Downloading: 50% Downloading: 60% Downloading: 65% Downloading: 70% Downloading: 75% Downloading: 80% Downloading: 85% Downloading: 90% Downloading: 95% ==> default: ==> default: Downloading: 100% ==> default: - Installing oyejorge/less.php (v1.7.0.1) ==> default: Downloading: connection... Downloading: 100% ==> default: ==> default: - Installing mrclay/minify (2.2.0) ==> default: Downloading: connection... ==> default: ==> default: Downloading: 100% ==> default: - Installing zendframework/zendxml (dev-master 5ea1061) ==> default: Cloning 5ea106152f32f738430f3af9ac638bf30adec625 ==> default: - Installing zendframework/zendframework (dev-master a7b91f5) ==> default: Cloning a7b91f585b7d342bcc61a810972997cba1d3ab17 ==> default: Failed to download zendframework/zendframework from source: The process "git clone --no-checkout 'git://git hub.com/zendframework/zf2.git' '/vagrant/c4/vendor/zendframework/zendframework' && cd '/vagrant/c4/vendor/zendframework/ zendframework' && git remote add composer 'git://github.com/zendframework/zf2.git' && git fetch composer" exceeded the t imeout of 300 seconds. ==> default: Now trying to download from dist ==> default: - Installing zendframework/zendframework (dev-master a7b91f5) ==> default: ==> default: [RuntimeException] ==> default: Could not delete /vagrant/c4/vendor/zendframework/zendframework/.git/objects/pack/tmp_pack_PcObR4: ==> default: ==> default: create-project [-s|--stability="..."] [--prefer-source] [--prefer-dist] [--repository-url="..."] [--dev] [- -no-dev] [--no-plugins] [--no-custom-installers] [--no-scripts] [--no-progress] [--keep-vcs] [--no-install] [package] [d irectory] [version] ==> default: ==> default: Cloning into 'Change_samples'... ==> default: Checking out files: 21% (18/84) ==> default: Checking out files: 22% (19/84) ==> default: Checking out files: 23% (20/84) ==> default: Checking out files: 25% (21/84) ==> default: Checking out files: 26% (22/84) ==> default: Checking out files: 27% (23/84) ==> default: Checking out files: 28% (24/84) ==> default: Checking out files: 29% (25/84) ==> default: Checking out files: 30% (26/84) ==> default: Checking out files: 32% (27/84) ==> default: Checking out files: 33% (28/84) ==> default: Checking out files: 34% (29/84) ==> default: Checking out files: 35% (30/84) ==> default: Checking out files: 36% (31/84) ==> default: Checking out files: 38% (32/84) ==> default: Checking out files: 39% (33/84) ==> default: Checking out files: 40% (34/84) ==> default: Checking out files: 41% (35/84) ==> default: Checking out files: 42% (36/84) ==> default: Checking out files: 44% (37/84) ==> default: Checking out files: 45% (38/84) ==> default: Checking out files: 46% (39/84) ==> default: Checking out files: 47% (40/84) ==> default: Checking out files: 48% (41/84) ==> default: Checking out files: 50% (42/84) ==> default: Checking out files: 51% (43/84) ==> default: Checking out files: 52% (44/84) ==> default: Checking out files: 53% (45/84) ==> default: Checking out files: 54% (46/84) ==> default: Checking out files: 55% (47/84) ==> default: Checking out files: 57% (48/84) ==> default: Checking out files: 58% (49/84) ==> default: Checking out files: 59% (50/84) ==> default: Checking out files: 60% (51/84) ==> default: Checking out files: 61% (52/84) ==> default: Checking out files: 63% (53/84) ==> default: Checking out files: 64% (54/84) ==> default: Checking out files: 65% (55/84) ==> default: Checking out files: 66% (56/84) ==> default: Checking out files: 67% (57/84) ==> default: Checking out files: 69% (58/84) ==> default: Checking out files: 70% (59/84) ==> default: Checking out files: 71% (60/84) ==> default: Checking out files: 72% (61/84) ==> default: Checking out files: 73% (62/84) ==> default: Checking out files: 75% (63/84) ==> default: Checking out files: 76% (64/84) ==> default: Checking out files: 77% (65/84) ==> default: Checking out files: 78% (66/84) ==> default: Checking out files: 79% (67/84) ==> default: Checking out files: 80% (68/84) ==> default: Checking out files: 82% (69/84) ==> default: Checking out files: 83% (70/84) ==> default: Checking out files: 84% (71/84) ==> default: Checking out files: 85% (72/84) ==> default: Checking out files: 86% (73/84) ==> default: Checking out files: 88% (74/84) ==> default: Checking out files: 89% (75/84) ==> default: Checking out files: 90% (76/84) ==> default: Checking out files: 91% (77/84) ==> default: Checking out files: 92% (78/84) ==> default: Checking out files: 94% (79/84) ==> default: Checking out files: 95% (80/84) ==> default: Checking out files: 96% (81/84) ==> default: Checking out files: 97% (82/84) ==> default: Checking out files: 98% (83/84) ==> default: Checking out files: 100% (84/84) ==> default: Checking out files: 100% (84/84), done. ==> default: ERROR ==> default: 1008 (HY000) at line 1: Can't drop database 'rbschangetest'; database doesn't exist ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Warning: require_once(/vagrant/c4/vendor/autoload.php): failed to open stream: No such file or directo ry in /vagrant/c4/Change/Application.php on line 87 ==> default: PHP Fatal error: require_once(): Failed opening required '/vagrant/c4/vendor/autoload.php' (include_path=' phar:///vagrant/c4/bin/change.phar:.:/usr/share/php:/usr/share/pear') in /vagrant/c4/Change/Application.php on line 87 ==> default: Could not open input file: Change_samples/Samples/Initialize.php ==> default: Could not open input file: Change_samples/Samples/ElasticSearch.php ==> default: Could not open input file: Change_samples/Samples/Catalog.php ==> default: Could not open input file: Change_samples/Samples/Products.php ==> default: Could not open input file: Change_samples/Samples/Simpleform.php ==> default: Could not open input file: Change_samples/Samples/Event.php==> default: Could not open input file: Change_samples/Samples/Publish.php