Open francotiveron opened 2 years ago
@pkelm1 If my understanding is correct, you want another check box and two additional values in the settings page, like
If so please
From Paul email ` I just looked and the following error variables were already in the twincat program:
Axis_01_Follow_Error_Enable: BOOL;
Axis_01_Following_Error: LREAL; `
Please answer the two remaining questions
There can be another check box the enable following error by soft limit and load cell enable. As for the location of the data field, I am not near a system right now to look but if you can propose somewhere I can take a look. Units should be feet and inches Paul KelmOwner / CEOMain: 410-231-7214, Direct: @.
-------- Original message --------From: Franco Tiveron @.> Date: 9/2/22 9:54 PM (GMT-05:00) To: francotiveron/Choreo @.> Cc: pkelm1 @.>, Assign @.***> Subject: Re: [francotiveron/Choreo] following error enable check box and value
(Issue #84)
From Paul email
I just looked and the following error variables were already in the twincat program: Axis_01_Follow_Error_Enable: BOOL; Axis_01_Following_Error: LREAL;
Please answer the two remaining questions from previous comment
Confirm Page layout Specify measurement unit and limits for he new value
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were assigned.Message ID: @.***>
[image: image.png]
On Sat, Sep 3, 2022 at 12:20 PM pkelm1 @.***> wrote:
There can be another check box the enable following error by soft limit and load cell enable. As for the location of the data field, I am not near a system right now to look but if you can propose somewhere I can take a look. Units should be feet and inches Paul KelmOwner / CEOMain: 410-231-7214, Direct: @. -------- Original message --------From: Franco Tiveron @.> Date: 9/2/22 9:54 PM (GMT-05:00) To: francotiveron/Choreo @.> Cc: pkelm1 @.>, Assign @.***> Subject: Re: [francotiveron/Choreo] following error enable check box and value (Issue #84) From Paul email
I just looked and the following error variables were already in the twincat program: Axis_01_Follow_Error_Enable: BOOL; Axis_01_Following_Error: LREAL;
Please answer the two remaining questions from previous commentConfirm Page layout Specify measurement unit and limits for he new value
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were assigned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/francotiveron/Choreo/issues/84#issuecomment-1236028220, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB7FXCU3E6OMAAP4Q3BSLADV4KYWFANCNFSM55COG4NQ . You are receiving this because you were assigned.Message ID: @.***>
From Paul email
'layout is fine'
Email from Paul '' I cant remember if I asked for a following error enable check box and value but it would be nice to have as well as the soft limits. ''