Closed ror1948 closed 2 months ago
Didn't know that there was a V2. Verify the following:
By any chance do you have the USB programmer? To verify the firmware version or upgrade it to the latest.
When trying to "find/discover" the RX, FP Lua send a command via the regular TX->RX channel, and expects to receive a response from the telemetry data channel. That's why is important that telemetry works.
The menus before you go to "Forward Programming" are actually local just to configure the TX info needed by the RX (Wing, tail, etc) .. no communication with the RX at this point. Until you hit "Forward Programming" is when is trying to talk to the RX.
yes i have usb programmer and i have already updated to latest(2.48.the V2 shows up when i go into Spektrum programmerFP works ok on my updated(2024) DX9 Tx
I was not using X2F i tried X2F and it seems to be working nowyes telemetry is there and updating. thanks On Friday, June 21, 2024 at 11:10:30 p.m. EDT, Frankie Arzu @.***> wrote:
Didn't know that there was a V2. Verify the following:
By any chance do you have the USB programmer? To verify the firmware version or upgrade it to the latest.
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>
Ron, did not understand your last message. Did forward programming work after binding using DSM-X2F??
yesthanks On Friday, June 21, 2024 at 11:27:29 p.m. EDT, Frankie Arzu @.***> wrote:
Ron, did not understand your last message. Did it work after binding using DSM-X2F??
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.***>
limited menu on ar631 v2 not enough to program Rx. when i try to enter forward programming option on Rx it says no DSM compatible Rx present.