Configure devices

[drewwhis]

The Limelight needs to be configured with static IP addresses.

Suggested IP Addresses are from: https://docs.wpilib.org/en/latest/docs/networking/networking-introduction/ip-configurations.html

The gateway for all devices should be 10.5.38.1.

• [x] Assign static IP to the radio
  • [x] Handled by the Radio Configuration Utility
  • [x] 10.5.38.1
• [ ] Assign static IP to the Limelight
  • [ ] Follow these directions: https://docs.limelightvision.io/en/latest/getting_started.html#networking
  • [ ] 10.5.38.11
  • [ ] Subnet Mask of 255.255.255.0
• [ ] Assign static IP to the roboRIO
  • [ ] Follow directions here: https://docs.wpilib.org/en/latest/docs/software/roborio-info/roborio-web-dashboard.html#roborio-web-dashboard
  • [ ] 10.5.38.2
  • [ ] Subnet Mask of 255.255.255.0
• [ ] Assign static IP to the laptop (both DS and programming laptops!)
  • [ ] Sample directions here: https://kb.netgear.com/27476/How-do-I-set-a-static-IP-address-in-Windows
  • [ ] 10.5.38.5
  • [ ] Subnet Mask of 255.0.0.0

[drewwhis]

@Hoodsen1 can you work on getting the Limelight itself on the right static IP sometime this week (and possibly the other devices)? The instructions above should be sufficient.