search

fredlcore / BSB-LAN

LAN/WiFi interface for Boiler-System-Bus (BSB) and Local Process Bus (LPB) and Punkt-zu-Punkt Schnittstelle (PPS) with a Siemens® controller used by Elco®, Brötje® and similar heating systems
222 stars 84 forks source link

[BUG] Update from 2.1.0 to 2.1.8-20220731102301 #509

Closed proasnet closed 1 year ago

proasnet commented 1 year ago

Before submitting a bug report, please make sure that you have checked chapter 14 of the manual ("Problems and their Possible Causes"). Most problems that are reported to us can be solved by going through the solutions provided there.

BSB-LAN Version 2.1.8-20220731102301

Architecture Arduino Due

Bus system BSB

Describe the bug Today after update, BSB not starting. In a serial log ending by this sample:

Size of cmdtbl: 126728
free RAM: 85403
BSB-LAN version: 2.1.8-20220731102301
2.1.8-20220731102301
Using RX/TX pins 18, 19
PPS settings:
Starting SD..ok
Waiting for DHCP address
192.168.0.150
255.255.255.0
192.168.0.254
Waiting 3 seconds to give Ethernet shield time to get ready...
Calculating free space on SD...14889 MB free
Start network services

In web viewer is not site loaded. BSB can ping Previous version was worked fine.

Logs

READY
EEPROM not ready
Reading EEPROM
Using settings from config file
Reading done.
EEPROM schema v.0 Program schema v.10
Update EEPROM schema
Address EEPROM option 0: 0
Address EEPROM option 1: 1
Address EEPROM option 2: 2
Address EEPROM option 3: 6
Address EEPROM option 4: 226
Address EEPROM option 5: 306
Address EEPROM option 6: 490
Address EEPROM option 7: 491
Address EEPROM option 8: 492
Address EEPROM option 9: 493
Address EEPROM option 10: 494
Address EEPROM option 11: 495
Address EEPROM option 12: 499
Address EEPROM option 13: 659
Address EEPROM option 14: 663
Address EEPROM option 15: 823
Address EEPROM option 16: 829
Address EEPROM option 17: 830
Address EEPROM option 18: 834
Address EEPROM option 19: 838
Address EEPROM option 20: 842
Address EEPROM option 21: 846
Address EEPROM option 22: 848
Address EEPROM option 23: 852
Address EEPROM option 24: 856
Address EEPROM option 25: 920
Address EEPROM option 26: 984
Address EEPROM option 27: 985
Address EEPROM option 28: 986
Address EEPROM option 29: 996
Address EEPROM option 30: 997
Address EEPROM option 31: 1157
Address EEPROM option 32: 1158
Address EEPROM option 33: 1162
Address EEPROM option 34: 1163
Address EEPROM option 35: 1164
Address EEPROM option 36: 1165
Address EEPROM option 37: 1169
Address EEPROM option 38: 1201
Address EEPROM option 39: 1233
Address EEPROM option 40: 1265
Address EEPROM option 41: 1297
Address EEPROM option 42: 1299
Address EEPROM option 43: 1300
Address EEPROM option 44: 1301
Address EEPROM option 45: 1302
Address EEPROM option 46: 1334
Address EEPROM option 47: 1398
Address EEPROM option 48: 1418
Address EEPROM option 49: 1438
Address EEPROM option 50: 1458
Address EEPROM option 51: 1459
Address EEPROM option 52: 1460
Address EEPROM option 53: 1461
Address EEPROM option 54: 1462
Address EEPROM option 55: 1463
Address EEPROM option 56: 1464
Address EEPROM option 57: 1496
Address EEPROM option 58: 1497
Address EEPROM option 59: 1498
Address EEPROM option 60: 1499
Address EEPROM option 61: 1501
Address EEPROM option 62: 1503
Address EEPROM option 63: 1504
Size of cmdtbl: 126728
free RAM: 85403
BSB-LAN version: 2.1.8-20220731102301
2.1.8-20220731102301
Using RX/TX pins 18, 19
PPS settings:
Starting SD..ok
Waiting for DHCP address
192.168.0.150
255.255.255.0
192.168.0.254
Waiting 3 seconds to give Ethernet shield time to get ready...
Calculating free space on SD...14889 MB free
Start network services
fredlcore commented 1 year ago

Please also post your BSB_LAN_config.h file contents here (remove credentials if necessary)

proasnet commented 1 year ago

After change pins rx tx back to 0,0, from 19,18, device working. In previous version, I had 19,18.

fredlcore commented 1 year ago

Great to hear it works then.