SAm0815_Hedy-alpha: mesh working but no internet

[lightcatcher]

setup: ubnt-erx (uplink) ---lanmesh---wdr3600()-+-+wifi-mesh-+-+nanostation-m2 firmware:

• ubnt-erx: 493-vpn03-freifunk-berlin-1.0.0-alpha-sam0815-43478e9-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.bin

• wdr3600: 572-freifunk-berlin-1.0.0-alpha-sam0815-43478e9-tl-wdr3600-v1-sysupgrade.bin

• nano m2: 572-freifunk-berlin-1.0.0-alpha-sam0815-43478e9-ubnt-nano-m-sysupgrade.bin

no internet at nanostation via lan+wifi, mesh works till wdr3600 (incl. webinterface) ping from device to lede-project.org gives "bad adress" log from after setup +reboot in the attachment

UPDATE: flashed the nano m2 today with kathleen 0.3.0 build, same issue with the setup. So it seems the source of the problem might be on the wdr3600 ? what do you think ?

no internet-nano-m2.txt

[SvenRoederer]

• Is the NSM seeing the OLSR-neighbours?
• what's the output of ip route get 8.8.8.8?

[lightcatcher]

NSM sees the wdr3600 in olsr neighbours

kathleen: root@berlinerstr-tegel-m2-2:~# ip route get 8.8.8.8 8.8.8.8 dev tnl_0a1f0057 src 10.31.15.28 cache

heady-alpha: root@berlinerstr-tegel-m2-2:~# ip route get 8.8.8.8 8.8.8.8 dev tnl_0a1f0057 table olsr-tunnel src 10.31.15.28 cache

[lightcatcher]

now working with Hedy-1.0.0-rc1.