freifunk-berlin / meta

Selbstorganisierung der Berliner Freifunk Community
https://berlin.freifunk.net
0 stars 0 forks source link

Teufelsberg: Maintenance & AP for the Security-Building #32

Open noxilixon opened 5 months ago

noxilixon commented 5 months ago

Preparation

On site

Done 🦾

Noki commented 5 months ago

The teufelsberg-ak36 antenna only needs vertical alignment. Without rain/snow a link is already possible if the ak36-teufelsberg is set to a channel width of 540/1080 MHz and a frequency of 68040, so the antenna can be aligned even without coordinating an appointment at ak36. However, aligning ak36 first would help a lot as that antenna is way off.

This is the current alignment chart for both sides of the link:

image

Koltonowski commented 2 months ago

Hardware Request: Dual-Band Device for Teufelsberg Security Booth and Entrance Area

Hello Berlin Freifunk-Community,

I am writing to request (give me your thumbs up) a dual-band wireless device to enhance the Wi-Fi coverage at the security booth and entrance area of Teufelsberg. The device should be capable of operating on both the 2.4 GHz and 5 GHz bands. Specifically, we need the 5 GHz band to mesh with the existing near-field antennas to ensure seamless connectivity across our current network infrastructure. Additionally, the 2.4 GHz band should function as an access point for clients in these areas.

Could you please suggest a suitable model (Microtik outdoor AP?!) that meets these specifications? Ideally, the device should be robust, weather-resistant, and capable of handling a significant number of simultaneous connections given the high traffic expected in these areas.

Looking forward to your recommendations and the next steps for deployment.

Thank you! grafik

robertfoss commented 2 months ago

TP-Link EAP225-Outdoor?

https://www.tp-link.com/de/business-networking/omada-sdn-access-point/eap225-outdoor/

https://openwrt.org/toh/hwdata/tp-link/tp-link_eap225-outdoor_v3

Koltonowski commented 2 months ago

TP-Link EAP225-Outdoor?

https://www.tp-link.com/de/business-networking/omada-sdn-access-point/eap225-outdoor/

https://openwrt.org/toh/hwdata/tp-link/tp-link_eap225-outdoor_v3

no eap225 please... We have only problems with meshing. For AP they are nice. The Stadtfunk already has devices in stock, but the current process requires that hardware support from the Stadtfunk be distributed only through the Freifunk Community (thumbs up). Therefore, an official call is being made.

Look here: https://github.com/freifunk-berlin/meta/blob/main/Hardware-orders.md

There also is already something configured, but I can'T see what and where... This Github visibility... :-( https://github.com/freifunk-berlin/bbb-configs/pull/762

noxilixon commented 2 months ago

As discussed in the matrix channel, we will for now use the devices as they were proposed in the pull request: