Philmel: Finish Maintenance

[FFHener]

Open TODO's bbb-configs:

• [ ] Update bbb-configs to current state
• [ ] comment sxtsqs out if not running in bbb-config
• [ ] flash hardware with new images
• [ ] close PR to have current state in bbb-configs

Open TODO's Hardware:

• [ ] aquire new sxtsqs for nearfield with shields and mount
• [ ] add and patch to new cables with plugs
  • [ ] westwindow
  • [ ] northwindow
• [ ] mount new sxtsqs for nearfield on tower

Open TODO's Alignement:

• [ ] Align philmel <-> Klunker 60GHz

Software

• [x] Update bbb-configs single location file config
• [ ] Create image
  • [x] Core-Router
  • [ ] Sxtsq

    Hardware

• [x] Prepare Switch
  • [x] ports to cardinal!
  • [x] keep hierarchy
  • [x] vlan
  • [x] poe
• [x] Prepare Rocket
• [x] Prepare isobeam 300
• [x] Exchange mikrotik 60ghz with sector sgfrd-core <-> philmel

  Alignment

• [ ] align 60GHz towards klunker philmel <-> klunker
• [x] align 5GHz towards ak36 philmel <-> ak36

Assembly Mounts etc.

Eastwindow

• [x] remove LiteAP in Eastwindow
• [x] Exchange SxtSQ5AC to the left side of window
• [x] Cut the right side of the SXTSQ Mount
• [x] Mount Pole in Eastwindow
• [x] Mount RocketLiteAC and TitaniumSector in right half of Eastwindow
• [x] Align devices SXT to Kranoldplatz and Rocket slightly to south with 120 degree angle

Network

• [x] change subnets and ips in config
• [x] Change subnets and ips on hardware

[booo]

Please keep me posted about the progress and planed work. Thanks.

I can invest a very limited amount of work as well if you need help.

[Petrella]

EDIT: Moved TODOs to top comment

## Open TODO's bbb-configs: - [ ] Update bbb-configs to current state - [ ] comment sxtsqs out if not running in bbb-config - [ ] flash hardware with new images - [ ] close PR to have current state in bbb-configs ## Open TODO's Hardware: - [ ] aquire new sxtsqs for nearfield with shields and mount - [ ] add and patch to new cables with plugs - [ ] westwindow - [ ] northwindow - [ ] mount new sxtsqs for nearfield on tower ## Open TODO's Alignement: - [ ] Align philmel <-> Klunker 60GHz ## Software - [x] Update bbb-configs single location file config - [ ] Create image - [x] Core-Router - [ ] Sxtsq ## Hardware - [x] Prepare Switch - [x] ports to cardinal! - [x] keep hierarchy - [x] vlan - [x] poe - [x] Prepare Rocket - [x] Prepare isobeam 300 - [x] Exchange mikrotik 60ghz with sector sgfrd-core <-> philmel ## Alignment - [ ] align 60GHz towards klunker philmel <-> klunker - [x] align 5GHz towards ak36 philmel <-> ak36 ## Assembly Mounts etc. ### Eastwindow - [x] remove LiteAP in Eastwindow - [x] Exchange SxtSQ5AC to the left side of window - [x] Cut the right side of the SXTSQ Mount - [x] Mount Pole in Eastwindow - [x] Mount RocketLiteAC and TitaniumSector in right half of Eastwindow - [x] Align devices SXT to Kranoldplatz and Rocket slightly to south with 120 degree angle ## Network - [x] change subnets and ips in config - [x] Change subnets and ips on hardware

[FFHener]

There might be another appointment next friday to finish the TODOs

[booo]

Not sure if that is on the agenda but it would make sense to check the channel assignment for each link and make sure we do not have overlapping channels in use. Double checking the tx power would be wise too. Most of the time we tend to use high tx power without very significant change in throughput.

[FFHener]

As this could be done remotly very easily I wouldnt put it into the scope of this on-site appointment. But in general im in favour of it.