0x676e67
commented
1 year ago card - eth0
[ 5.551161] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 5.551183] Linux version 5.10.110 (ubuntu@47afd00cbac1) (aarch64-linux-gnu-gcc (ctng-1.23.0-150g-FA) 6.4.0, GNU ld (ctng-1.23.0-150g-FA) 2.28) #1 SMP Mon Oct 31 18:57:47 CST 2022
[ 5.559556] Machine model: FriendlyElec NanoPi R6S
[ 5.602838] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[ 5.605869] printk: bootconsole [uart8250] enabled
[ 5.610642] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 5.611683] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[ 5.612802] Reserved memory: created CMA memory pool at 0x00000001ff800000, size 8 MiB
[ 5.613513] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[ 5.739551] Zone ranges:
[ 5.739790] DMA [mem 0x0000000000200000-0x00000000ffffffff]
[ 5.740349] DMA32 empty
[ 5.740613] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 5.741171] Movable zone start for each node
[ 5.741554] Early memory node ranges
[ 5.741877] node 0: [mem 0x0000000000200000-0x00000000083fffff]
[ 5.742440] node 0: [mem 0x0000000009400000-0x00000000efffffff]
[ 5.743006] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 5.743573] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[ 5.744208] On node 0 totalpages: 2027008
[ 5.744214] DMA zone: 15288 pages used for memmap
[ 5.744217] DMA zone: 0 pages reserved
[ 5.744221] DMA zone: 978432 pages, LIFO batch:63
[ 5.744226] Normal zone: 16384 pages used for memmap
[ 5.744230] Normal zone: 1048576 pages, LIFO batch:63
[ 5.789342] psci: probing for conduit method from DT.
[ 5.789804] psci: PSCIv1.1 detected in firmware.
[ 5.790223] psci: Using standard PSCI v0.2 function IDs
[ 5.790695] psci: Trusted OS migration not required
[ 5.791137] psci: SMC Calling Convention v1.2
[ 5.791903] percpu: Embedded 31 pages/cpu s87592 r8192 d31192 u126976
[ 5.792516] pcpu-alloc: s87592 r8192 d31192 u126976 alloc=31*4096
[ 5.792523] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 5.792656] Detected VIPT I-cache on CPU0
[ 5.793050] CPU features: detected: GIC system register CPU interface
[ 5.793628] CPU features: detected: Virtualization Host Extensions
[ 5.794188] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 5.794827] alternatives: patching kernel code
[ 5.796828] Built 1 zonelists, mobility grouping on. Total pages: 1995336
[ 5.797451] Kernel command line: storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normal androidboot.dtbo_idx=1 androidboot.verifiedbootstate=orange earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 coherent_pool=1m irqchip.gicv3_pseudo_nmi=0 rw root=/dev/mmcblk0p8 rootfstype=ext4 data=/dev/mmcblk0p9 consoleblank=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[ 5.801858] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 5.802952] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 5.803657] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 5.810312] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
[ 5.870737] Memory: 7830224K/8108032K available (17662K kernel code, 3228K rwdata, 6152K rodata, 10944K init, 894K bss, 269616K reserved, 8192K cma-reserved)
[ 5.872124] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 5.872739] ftrace: allocating 56691 entries in 222 pages
[ 5.960209] ftrace: allocated 222 pages with 6 groups
[ 5.960922] rcu: Hierarchical RCU implementation.
[ 5.961353] rcu: RCU event tracing is enabled.
[ 5.961764] Rude variant of Tasks RCU enabled.
[ 5.962177] Tracing variant of Tasks RCU enabled.
[ 5.962613] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 5.966124] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 5.968997] GICv3: GIC: Using split EOI/Deactivate mode
[ 5.969474] GICv3: 480 SPIs implemented
[ 5.969825] GICv3: 0 Extended SPIs implemented
[ 5.970250] GICv3: Distributor has no Range Selector support
[ 5.970770] GICv3: 16 PPIs implemented
[ 5.971152] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[ 5.971875] ITS [mem 0xfe640000-0xfe65ffff]
[ 5.972298] ITS@0x00000000fe640000: allocated 8192 Devices @1001c0000 (indirect, esz 8, psz 64K, shr 0)
[ 5.973169] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @1001d0000 (flat, esz 2, psz 64K, shr 0)
[ 5.974112] ITS: using cache flushing for cmd queue
[ 5.974582] ITS [mem 0xfe660000-0xfe67ffff]
[ 5.974999] ITS@0x00000000fe660000: allocated 8192 Devices @1001f0000 (indirect, esz 8, psz 64K, shr 0)
[ 5.975873] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100200000 (flat, esz 2, psz 64K, shr 0)
[ 5.976814] ITS: using cache flushing for cmd queue
[ 5.977448] GICv3: using LPI property table @0x0000000100210000
[ 5.978093] GIC: using cache flushing for LPI property table
[ 5.978610] GICv3: CPU0: using allocated LPI pending table @0x0000000100220000
[ 5.979412] random: get_random_bytes called from start_kernel+0x3f0/0x570 with crng_init=0
[ 6.093455] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 6.094764] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 6.095749] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 6.097568] Console: colour dummy device 80x25
[ 6.098004] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 6.098944] pid_max: default: 32768 minimum: 301
[ 6.099459] LSM: Security Framework initializing
[ 6.099939] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 6.100642] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 6.102937] rcu: Hierarchical SRCU implementation.
[ 6.104059] Platform MSI: msi-controller@fe640000 domain created
[ 6.104622] Platform MSI: msi-controller@fe660000 domain created
[ 6.105482] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[ 6.106252] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[ 6.107534] smp: Bringing up secondary CPUs ...
[ 6.109087] Detected VIPT I-cache on CPU1
[ 6.109117] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[ 6.109131] GICv3: CPU1: using allocated LPI pending table @0x0000000100230000
[ 6.109172] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[ 6.110349] Detected VIPT I-cache on CPU2
[ 6.110373] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[ 6.110387] GICv3: CPU2: using allocated LPI pending table @0x0000000100240000
[ 6.110423] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[ 6.111594] Detected VIPT I-cache on CPU3
[ 6.111613] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[ 6.111626] GICv3: CPU3: using allocated LPI pending table @0x0000000100250000
[ 6.111660] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[ 6.112806] CPU features: detected: Spectre-v4
[ 6.112808] CPU features: detected: Spectre-BHB
[ 6.112810] Detected PIPT I-cache on CPU4
[ 6.112821] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[ 6.112829] GICv3: CPU4: using allocated LPI pending table @0x0000000100260000
[ 6.112851] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[ 6.113965] Detected PIPT I-cache on CPU5
[ 6.113977] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[ 6.113985] GICv3: CPU5: using allocated LPI pending table @0x0000000100270000
[ 6.114008] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[ 6.115134] Detected PIPT I-cache on CPU6
[ 6.115146] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[ 6.115153] GICv3: CPU6: using allocated LPI pending table @0x0000000100280000
[ 6.115176] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[ 6.116290] Detected PIPT I-cache on CPU7
[ 6.116302] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[ 6.116310] GICv3: CPU7: using allocated LPI pending table @0x0000000100290000
[ 6.116333] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[ 6.116388] smp: Brought up 1 node, 8 CPUs
[ 6.133250] SMP: Total of 8 processors activated.
[ 6.133690] CPU features: detected: Privileged Access Never
[ 6.134197] CPU features: detected: LSE atomic instructions
[ 6.134702] CPU features: detected: User Access Override
[ 6.135186] CPU features: detected: 32-bit EL0 Support
[ 6.135652] CPU features: detected: Common not Private translations
[ 6.136220] CPU features: detected: RAS Extension Support
[ 6.136712] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 6.137493] CPU features: detected: CRC32 instructions
[ 6.137960] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 6.138595] CPU features: detected: RCpc load-acquire (LDAPR)
[ 6.167881] CPU: All CPU(s) started at EL2
[ 6.170890] devtmpfs: initialized
[ 6.180533] Trying to unpack rootfs image as initramfs...
[ 6.181025] Registered cp15_barrier emulation handler
[ 6.181487] Registered setend emulation handler
[ 6.181899] KASLR disabled due to lack of seed
[ 6.182366] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 6.183263] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 6.184061] pinctrl core: initialized pinctrl subsystem
[ 6.184624] regulator-dummy: no parameters, enabled
[ 6.184915] NET: Registered protocol family 16
[ 6.195304] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 6.196001] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 6.196725] audit: initializing netlink subsys (disabled)
[ 6.197275] audit: type=2000 audit(0.100:1): state=initialized audit_enabled=0 res=1
[ 6.197700] thermal_sys: Registered thermal governor 'fair_share'
[ 6.197976] thermal_sys: Registered thermal governor 'step_wise'
[ 6.198528] thermal_sys: Registered thermal governor 'user_space'
[ 6.199338] cpuidle: using governor menu
[ 6.200248] Registered FIQ tty driver
[ 6.200758] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 6.201620] ASID allocator initialised with 65536 entries
[ 6.203240] ramoops: dmesg-0 0x18000@0x0000000000110000
[ 6.203721] ramoops: dmesg-1 0x18000@0x0000000000128000
[ 6.204201] ramoops: console 0x80000@0x0000000000140000
[ 6.204679] ramoops: pmsg 0x30000@0x00000000001c0000
[ 6.205358] printk: console [ramoops-1] enabled
[ 6.205831] pstore: Registered ramoops as persistent store backend
[ 6.206392] ramoops: using 0xe0000@0x110000, ecc: 0
[ 6.240142] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[ 6.240895] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[ 6.241625] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[ 6.242378] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[ 6.243119] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[ 6.243757] rockchip-pinctrl pinctrl: probed pinctrl
[ 6.249882] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 6.250492] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 6.251099] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 6.251705] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 6.253025] cryptd: max_cpu_qlen set to 1000
[ 6.255350] fiq_debugger fiq_debugger.0: IRQ fiq not found
[ 6.255851] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[ 6.256373] fiq_debugger_probe: could not install nmi irq handler
[ 6.256965] printk: console [ttyFIQ0] enabled
[ 6.257737] printk: bootconsole [uart8250] disabled
[ 6.258232] Registered fiq debugger ttyFIQ0
[ 6.258398] vcc5v0_sys: 5000 mV, enabled
[ 6.258464] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
[ 6.258497] reg-fixed-voltage vcc5v0-usb: Looking up vin-supply from device tree
[ 6.258501] vcc5v0_usb: supplied by vcc5v0_sys
[ 6.258507] vcc5v0_sys: could not add device link regulator.2: -ENOENT
[ 6.258518] vcc5v0_usb: 5000 mV, enabled
[ 6.258563] reg-fixed-voltage vcc5v0-usb: vcc5v0_usb supplying 5000000uV
[ 6.258593] reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
[ 6.258596] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[ 6.258600] vcc5v0_sys: could not add device link regulator.3: -ENOENT
[ 6.258614] vcc_1v1_nldo_s3: 1100 mV, enabled
[ 6.258657] reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
[ 6.258736] vbus5v0_typec: 5000 mV, disabled
[ 6.258770] reg-fixed-voltage vbus5v0-typec: Looking up vin-supply from device tree
[ 6.258773] vbus5v0_typec: supplied by vcc5v0_usb
[ 6.258801] reg-fixed-voltage vbus5v0-typec: vbus5v0_typec supplying 5000000uV
[ 6.258870] vcc5v0_host_20: 5000 mV, disabled
[ 6.258903] reg-fixed-voltage vcc5v0-host-20: Looking up vin-supply from device tree
[ 6.258906] vcc5v0_host_20: supplied by vcc5v0_usb
[ 6.258931] reg-fixed-voltage vcc5v0-host-20: vcc5v0_host_20 supplying 5000000uV
[ 6.259055] iommu: Default domain type: Translated
[ 6.259107] rk_iommu fdab9000.iommu: version = 2
[ 6.259326] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
[ 6.259341] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.259391] rk_iommu fdb50800.iommu: version = 2
[ 6.259563] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
[ 6.259575] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.259599] rk_iommu fdb60f00.iommu: version = 2
[ 6.259710] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
[ 6.259722] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.259748] rk_iommu fdb70f00.iommu: version = 2
[ 6.259883] rk_iommu fdb90480.iommu: version = 2
[ 6.260033] rk_iommu fdba0800.iommu: version = 2
[ 6.260184] rk_iommu fdba4800.iommu: version = 2
[ 6.260342] rk_iommu fdba8800.iommu: version = 2
[ 6.260494] rk_iommu fdbac800.iommu: version = 2
[ 6.260646] rk_iommu fdbb0800.iommu: version = 2
[ 6.260749] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
[ 6.260761] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.260804] rk_iommu fdbdf000.iommu: version = 2
[ 6.260880] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
[ 6.260892] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.260975] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
[ 6.260986] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.261033] rk_iommu fdbef000.iommu: version = 2
[ 6.261212] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
[ 6.261224] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.261277] rk_iommu fdc38700.iommu: version = 2
[ 6.261459] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
[ 6.261471] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.261523] rk_iommu fdc48700.iommu: version = 2
[ 6.261636] rk_iommu fdd97e00.iommu: version = 2
[ 6.261867] SCSI subsystem initialized
[ 6.261881] libata version 3.00 loaded.
[ 6.261928] usbcore: registered new interface driver usbfs
[ 6.261940] usbcore: registered new interface driver hub
[ 6.261953] usbcore: registered new device driver usb
[ 6.262052] mc: Linux media interface: v0.10
[ 6.262060] videodev: Linux video capture interface: v2.00
[ 6.262085] pps_core: LinuxPPS API ver. 1 registered
[ 6.262089] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 6.262094] PTP clock support registered
[ 6.262276] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[ 6.262305] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[ 6.263014] Advanced Linux Sound Architecture Driver Initialized.
[ 6.263222] Bluetooth: Core ver 2.22
[ 6.263232] NET: Registered protocol family 31
[ 6.263235] Bluetooth: HCI device and connection manager initialized
[ 6.263240] Bluetooth: HCI socket layer initialized
[ 6.263245] Bluetooth: L2CAP socket layer initialized
[ 6.263250] Bluetooth: SCO socket layer initialized
[ 6.263257] NetLabel: Initializing
[ 6.263260] NetLabel: domain hash size = 128
[ 6.263262] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 6.263284] NetLabel: unlabeled traffic allowed by default
[ 6.264502] rockchip-cpuinfo cpuinfo: SoC : 35880000
[ 6.264507] rockchip-cpuinfo cpuinfo: Serial : 3140b86dc423aec1
[ 6.264801] clocksource: Switched to clocksource arch_sys_counter
[ 6.348524] Freeing initrd memory: 7308K
[ 6.544753] VFS: Disk quotas dquot_6.6.0
[ 6.544784] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 6.544845] FS-Cache: Loaded
[ 6.547230] NET: Registered protocol family 2
[ 6.547329] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 6.549126] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[ 6.549214] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 6.549538] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 6.550309] TCP: Hash tables configured (established 65536 bind 65536)
[ 6.550357] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 6.550541] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[ 6.550773] NET: Registered protocol family 1
[ 6.550963] RPC: Registered named UNIX socket transport module.
[ 6.550967] RPC: Registered udp transport module.
[ 6.550970] RPC: Registered tcp transport module.
[ 6.550972] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.551096] PCI: CLS 0 bytes, default 64
[ 6.551727] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 6.554171] Initialise system trusted keyrings
[ 6.554223] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 6.556065] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 6.556175] FS-Cache: Netfs 'nfs' registered for caching
[ 6.556304] NFS: Registering the id_resolver key type
[ 6.556311] Key type id_resolver registered
[ 6.556314] Key type id_legacy registered
[ 6.556340] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 6.556346] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 6.556420] fuse: init (API version 7.32)
[ 6.575688] Key type asymmetric registered
[ 6.575694] Asymmetric key parser 'x509' registered
[ 6.575708] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 6.575753] io scheduler mq-deadline registered
[ 6.575758] io scheduler kyber registered
[ 6.575789] io scheduler bfq registered
[ 6.576724] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply from device tree
[ 6.576856] vbus5v0_typec: could not add device link phy-fd5d0000.syscon:usb2-phy@0.0: -ENOENT
[ 6.576924] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply from device tree
[ 6.576929] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
[ 6.577868] phy phy-fd5d8000.syscon:usb2-phy@8000.1: Looking up phy-supply from device tree
[ 6.577924] vcc5v0_host_20: could not add device link phy-fd5d8000.syscon:usb2-phy@8000.1: -ENOENT
[ 6.578967] phy phy-fee00000.phy.2: Looking up phy-supply from device tree
[ 6.578972] phy phy-fee00000.phy.2: Looking up phy-supply property in node /phy@fee00000 failed
[ 6.579062] phy phy-fee20000.phy.3: Looking up phy-supply from device tree
[ 6.579066] phy phy-fee20000.phy.3: Looking up phy-supply property in node /phy@fee20000 failed
[ 6.579474] phy phy-fed60000.hdmiphy.4: Looking up phy-supply from device tree
[ 6.579479] phy phy-fed60000.hdmiphy.4: Looking up phy-supply property in node /hdmiphy@fed60000 failed
[ 6.579941] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[ 6.580439] phy phy-fed80000.phy.5: Looking up phy-supply from device tree
[ 6.580443] phy phy-fed80000.phy.5: Looking up phy-supply property in node /phy@fed80000/u3-port failed
[ 6.581080] iep: Module initialized.
[ 6.581106] mpp_service mpp-srv: c4d2f233f778 author: jensen 2022-10-14 Merge remote-tracking branch 'rksdk/develop-5.10'
[ 6.581110] mpp_service mpp-srv: probe start
[ 6.581968] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[ 6.582142] mpp_vdpu2 fdb50400.vdpu: probe device
[ 6.582240] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[ 6.582247] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[ 6.582302] mpp_vdpu2 fdb50400.vdpu: probing finish
[ 6.582439] mpp_vepu2 jpege-ccu: probing start
[ 6.582443] mpp_vepu2 jpege-ccu: probing finish
[ 6.582518] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[ 6.582641] mpp_vepu2 fdba0000.jpege-core: probing start
[ 6.582721] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[ 6.582773] mpp_vepu2 fdba0000.jpege-core: probing finish
[ 6.582854] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[ 6.582988] mpp_vepu2 fdba4000.jpege-core: probing start
[ 6.583060] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[ 6.583108] mpp_vepu2 fdba4000.jpege-core: probing finish
[ 6.583186] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[ 6.583308] mpp_vepu2 fdba8000.jpege-core: probing start
[ 6.583379] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[ 6.583437] mpp_vepu2 fdba8000.jpege-core: probing finish
[ 6.583516] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[ 6.583634] mpp_vepu2 fdbac000.jpege-core: probing start
[ 6.583708] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[ 6.583756] mpp_vepu2 fdbac000.jpege-core: probing finish
[ 6.583936] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[ 6.584057] mpp-iep2 fdbb0000.iep: probe device
[ 6.584149] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[ 6.584193] mpp-iep2 fdbb0000.iep: probing finish
[ 6.584339] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[ 6.584510] mpp_jpgdec fdb90000.jpegd: probe device
[ 6.584639] mpp_jpgdec fdb90000.jpegd: probing finish
[ 6.584899] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[ 6.584940] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[ 6.584998] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[ 6.585204] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[ 6.585294] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[ 6.585298] rkvdec2_init:1006: No niu aclk reset resource define
[ 6.585302] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[ 6.585305] rkvdec2_init:1009: No niu hclk reset resource define
[ 6.585318] mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply from device tree
[ 6.585322] mpp_rkvdec2 fdc38100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc38000 failed
[ 6.585327] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
[ 6.585373] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[ 6.585376] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[ 6.585507] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[ 6.585511] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[ 6.585514] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[ 6.585518] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[ 6.585521] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[ 6.585544] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[ 6.585596] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[ 6.585783] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[ 6.585868] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[ 6.585872] rkvdec2_init:1006: No niu aclk reset resource define
[ 6.585876] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[ 6.585879] rkvdec2_init:1009: No niu hclk reset resource define
[ 6.585889] mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply from device tree
[ 6.585893] mpp_rkvdec2 fdc48100.rkvdec-core: Looking up vdec-supply property in node /rkvdec-core@fdc48000 failed
[ 6.585897] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
[ 6.585929] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[ 6.585945] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[ 6.586096] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[ 6.586100] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[ 6.586103] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[ 6.586106] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[ 6.586111] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[ 6.586131] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[ 6.586236] mpp_rkvenc2 rkvenc-ccu: probing start
[ 6.586241] mpp_rkvenc2 rkvenc-ccu: probing finish
[ 6.586323] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[ 6.586476] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[ 6.586489] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[ 6.586603] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[ 6.586662] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[ 6.586707] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[ 6.586904] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[ 6.586916] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[ 6.587043] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[ 6.587094] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[ 6.587233] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply from device tree
[ 6.587248] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply property in node /power-management@fd8d8000/power-controller failed
[ 6.587457] mpp_av1dec: Adding child /av1d@fdc70000
[ 6.587639] mpp_av1dec: register device av1d-master
[ 6.587653] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[ 6.587668] av1_iommu_probe_device,737, consumer : av1d-master, supplier : fdca0000.iommu
[ 6.587674] mpp_av1dec av1d-master: Adding to iommu group 15
[ 6.587862] mpp_av1dec av1d-master: probing start
[ 6.588001] mpp_av1dec av1d-master: probing finish
[ 6.588026] mpp_service mpp-srv: probe success
[ 6.593569] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 6.593576] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 6.594227] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 6.594233] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 6.594901] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 6.594907] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[ 6.595189] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[ 6.595234] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[ 6.595275] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[ 6.595314] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[ 6.595351] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[ 6.595640] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 6.596230] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 6.597114] random: fast init done
[ 6.597197] random: crng init done
[ 6.597477] rockchip-vop2 fdd90000.vop: Adding to iommu group 14
[ 6.601336] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[ 6.601345] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[ 6.601361] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[ 6.601368] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[ 6.601374] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2
[ 6.601379] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2
[ 6.609893] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffff800011241cc8)
[ 6.610352] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[ 6.610468] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffff800011249bf8)
[ 6.610776] rockchip-drm display-subsystem: failed to parse loader memory
[ 6.610817] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 6.610872] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[ 6.611229] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[ 6.616535] brd: module loaded
[ 6.619194] loop: module loaded
[ 6.619304] lkdtm: No crash points registered, enable through debugfs
[ 6.619378] system_heap: orders[0] = 6
[ 6.619381] system_heap: orders[1] = 4
[ 6.619384] system_heap: orders[2] = 0
[ 6.620885] rockchip-spi feb20000.spi: no high_speed pinctrl state
[ 6.621860] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[ 6.622059] rk806 spi2.0: ON: 0x40 OFF:0x0
[ 6.623442] rk806-regulator rk806-regulator.4.auto: Looking up vcc1-supply from device tree
[ 6.623448] vdd_gpu_s0: supplied by vcc5v0_sys
[ 6.623457] vcc5v0_sys: could not add device link regulator.6: -ENOENT
[ 6.624160] vdd_gpu_s0: 550 <--> 950 mV at 750 mV, enabled
[ 6.624501] rk806-regulator rk806-regulator.4.auto: Looking up vcc2-supply from device tree
[ 6.624505] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[ 6.624510] vcc5v0_sys: could not add device link regulator.7: -ENOENT
[ 6.624699] vdd_cpu_lit_s0: 550 <--> 950 mV at 750 mV, enabled
[ 6.625041] rk806-regulator rk806-regulator.4.auto: Looking up vcc3-supply from device tree
[ 6.625044] vdd_log_s0: supplied by vcc5v0_sys
[ 6.625050] vcc5v0_sys: could not add device link regulator.8: -ENOENT
[ 6.625237] vdd_log_s0: 675 <--> 750 mV at 750 mV, enabled
[ 6.625623] rk806-regulator rk806-regulator.4.auto: Looking up vcc4-supply from device tree
[ 6.625627] vdd_vdenc_s0: supplied by vcc5v0_sys
[ 6.625632] vcc5v0_sys: could not add device link regulator.9: -ENOENT
[ 6.625818] vdd_vdenc_s0: 550 <--> 950 mV at 750 mV, enabled
[ 6.626290] rk806-regulator rk806-regulator.4.auto: Looking up vcc5-supply from device tree
[ 6.626294] vdd_ddr_s0: supplied by vcc5v0_sys
[ 6.626301] vcc5v0_sys: could not add device link regulator.10: -ENOENT
[ 6.626488] vdd_ddr_s0: 675 <--> 900 mV at 850 mV, enabled
[ 6.626630] rk806-regulator rk806-regulator.4.auto: Looking up vcc6-supply from device tree
[ 6.626633] vdd2_ddr_s3: supplied by vcc5v0_sys
[ 6.626638] vcc5v0_sys: could not add device link regulator.11: -ENOENT
[ 6.626879] vdd2_ddr_s3: at 500 mV, enabled
[ 6.627181] rk806-regulator rk806-regulator.4.auto: Looking up vcc7-supply from device tree
[ 6.627184] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[ 6.627189] vcc5v0_sys: could not add device link regulator.12: -ENOENT
[ 6.627381] vdd_2v0_pldo_s3: 2000 mV, enabled
[ 6.627681] rk806-regulator rk806-regulator.4.auto: Looking up vcc8-supply from device tree
[ 6.627685] vcc_3v3_s3: supplied by vcc5v0_sys
[ 6.627690] vcc5v0_sys: could not add device link regulator.13: -ENOENT
[ 6.627875] vcc_3v3_s3: 3300 mV, enabled
[ 6.628133] rk806-regulator rk806-regulator.4.auto: Looking up vcc9-supply from device tree
[ 6.628136] vddq_ddr_s0: supplied by vcc5v0_sys
[ 6.628142] vcc5v0_sys: could not add device link regulator.14: -ENOENT
[ 6.628377] vddq_ddr_s0: at 500 mV, enabled
[ 6.628686] rk806-regulator rk806-regulator.4.auto: Looking up vcc10-supply from device tree
[ 6.628690] vcc_1v8_s3: supplied by vcc5v0_sys
[ 6.628695] vcc5v0_sys: could not add device link regulator.15: -ENOENT
[ 6.628882] vcc_1v8_s3: 1800 mV, enabled
[ 6.629192] rk806-regulator rk806-regulator.4.auto: Looking up vcc13-supply from device tree
[ 6.629283] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[ 6.629289] vcc_1v1_nldo_s3: could not add device link regulator.16: -ENOENT
[ 6.629479] vdd_0v75_s3: 750 mV, enabled
[ 6.629871] rk806-regulator rk806-regulator.4.auto: Looking up vcc13-supply from device tree
[ 6.629876] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[ 6.629881] vcc_1v1_nldo_s3: could not add device link regulator.17: -ENOENT
[ 6.630071] vdd_ddr_pll_s0: 850 mV, enabled
[ 6.630369] rk806-regulator rk806-regulator.4.auto: Looking up vcc13-supply from device tree
[ 6.630373] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[ 6.630378] vcc_1v1_nldo_s3: could not add device link regulator.18: -ENOENT
[ 6.630563] avdd_0v75_s0: 837 mV, enabled
[ 6.630856] rk806-regulator rk806-regulator.4.auto: Looking up vcc14-supply from device tree
[ 6.630861] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[ 6.630866] vcc_1v1_nldo_s3: could not add device link regulator.19: -ENOENT
[ 6.631058] vdd_0v85_s0: 850 mV, enabled
[ 6.631350] rk806-regulator rk806-regulator.4.auto: Looking up vcc14-supply from device tree
[ 6.631354] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[ 6.631359] vcc_1v1_nldo_s3: could not add device link regulator.20: -ENOENT
[ 6.631544] vdd_0v75_s0: 750 mV, enabled
[ 6.631936] rk806-regulator rk806-regulator.4.auto: Looking up vcc11-supply from device tree
[ 6.631964] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[ 6.631969] vdd_2v0_pldo_s3: could not add device link regulator.21: -ENOENT
[ 6.632299] avcc_1v8_s0: 1800 mV, enabled
[ 6.632684] rk806-regulator rk806-regulator.4.auto: Looking up vcc11-supply from device tree
[ 6.632690] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[ 6.632695] vdd_2v0_pldo_s3: could not add device link regulator.22: -ENOENT
[ 6.633025] vcc_1v8_s0: 1800 mV, enabled
[ 6.633323] rk806-regulator rk806-regulator.4.auto: Looking up vcc11-supply from device tree
[ 6.633328] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[ 6.633333] vdd_2v0_pldo_s3: could not add device link regulator.23: -ENOENT
[ 6.633662] avdd_1v2_s0: 1200 mV, enabled
[ 6.633962] rk806-regulator rk806-regulator.4.auto: Looking up vcc12-supply from device tree
[ 6.633966] vcc_3v3_s0: supplied by vcc5v0_sys
[ 6.633971] vcc5v0_sys: could not add device link regulator.24: -ENOENT
[ 6.634157] vcc_3v3_s0: 3300 mV, enabled
[ 6.634447] rk806-regulator rk806-regulator.4.auto: Looking up vcc12-supply from device tree
[ 6.634451] vccio_sd_s0: supplied by vcc5v0_sys
[ 6.634456] vcc5v0_sys: could not add device link regulator.25: -ENOENT
[ 6.634649] vccio_sd_s0: 1800 <--> 3300 mV at 3300 mV, enabled
[ 6.634967] rk806-regulator rk806-regulator.4.auto: Looking up vcca-supply from device tree
[ 6.634971] pldo6_s3: supplied by vcc5v0_sys
[ 6.634977] vcc5v0_sys: could not add device link regulator.26: -ENOENT
[ 6.635163] pldo6_s3: 1800 mV, enabled
[ 6.635413] rk806 spi2.0: no sleep-setting state
[ 6.635418] rk806 spi2.0: no reset-setting pinctrl state
[ 6.635422] rk806 spi2.0: no dvs-setting pinctrl state
[ 6.637731] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[ 6.637846] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply from device tree
[ 6.637855] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply property in node /ethernet@fe1c0000 failed
[ 6.637864] rk_gmac-dwmac fe1c0000.ethernet: no regulator found
[ 6.637870] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
[ 6.637875] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x42).
[ 6.637879] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
[ 6.637883] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
[ 6.637896] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[ 6.637901] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
[ 6.637906] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
[ 6.637919] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
[ 6.638136] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
[ 6.638206] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[ 6.638211] rk_gmac-dwmac fe1c0000.ethernet: DWMAC4/5
[ 6.638217] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
[ 6.638222] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
[ 6.638226] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
[ 6.638230] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[ 6.638257] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[ 6.638261] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 6.638266] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
[ 6.638270] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[ 6.638275] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
[ 6.800879] PPP generic driver version 2.4.2
[ 6.800980] usbcore: registered new interface driver asix
[ 6.801003] usbcore: registered new interface driver ax88179_178a
[ 6.801014] usbcore: registered new interface driver cdc_ether
[ 6.801025] usbcore: registered new interface driver rndis_host
[ 6.801037] usbcore: registered new interface driver qmi_wwan
[ 6.807505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.807516] ehci-pci: EHCI PCI platform driver
[ 6.807535] ehci-platform: EHCI generic platform driver
[ 6.809912] ehci-platform fc800000.usb: EHCI Host Controller
[ 6.809926] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[ 6.809980] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
[ 6.834810] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[ 6.834885] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 6.834891] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.834895] usb usb1: Product: EHCI Host Controller
[ 6.834899] usb usb1: Manufacturer: Linux 5.10.110 ehci_hcd
[ 6.834903] usb usb1: SerialNumber: fc800000.usb
[ 6.835106] hub 1-0:1.0: USB hub found
[ 6.835119] hub 1-0:1.0: 1 port detected
[ 6.835380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.835389] ohci-platform: OHCI generic platform driver
[ 6.835505] ohci-platform fc840000.usb: Generic Platform OHCI controller
[ 6.835514] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 2
[ 6.835553] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
[ 6.908873] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[ 6.908880] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.908885] usb usb2: Product: Generic Platform OHCI controller
[ 6.908889] usb usb2: Manufacturer: Linux 5.10.110 ohci_hcd
[ 6.908893] usb usb2: SerialNumber: fc840000.usb
[ 6.909067] hub 2-0:1.0: USB hub found
[ 6.909079] hub 2-0:1.0: 1 port detected
[ 6.909420] usbcore: registered new interface driver cdc_acm
[ 6.909425] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 6.909438] usbcore: registered new interface driver cdc_wdm
[ 6.909503] usbcore: registered new interface driver uas
[ 6.909530] usbcore: registered new interface driver usb-storage
[ 6.909559] usbcore: registered new interface driver usbserial_generic
[ 6.909568] usbserial: USB Serial support registered for generic
[ 6.909580] usbcore: registered new interface driver ch341
[ 6.909587] usbserial: USB Serial support registered for ch341-uart
[ 6.909599] usbcore: registered new interface driver cp210x
[ 6.909607] usbserial: USB Serial support registered for cp210x
[ 6.909624] usbcore: registered new interface driver ftdi_sio
[ 6.909631] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 6.909664] usbcore: registered new interface driver option
[ 6.909673] usbserial: USB Serial support registered for GSM modem (1-port)
[ 6.909718] usbcore: registered new interface driver pl2303
[ 6.909725] usbserial: USB Serial support registered for pl2303
[ 6.909739] usbcore: registered new interface driver qcserial
[ 6.909746] usbserial: USB Serial support registered for Qualcomm USB modem
[ 6.909949] mousedev: PS/2 mouse device common for all mice
[ 6.910131] <<-GTP-INFO->> GTP driver installing
[ 6.910271] .. rk pwm remotectl v2.0 init
[ 6.910357] input: fd8b0030.pwm as /devices/platform/fd8b0030.pwm/input/input0
[ 6.910479] remotectl-pwm fd8b0030.pwm: pwm version is 0x2130000
[ 6.910499] remotectl-pwm fd8b0030.pwm: Controller support pwrkey capture
[ 6.911608] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input1
[ 6.911803] i2c /dev entries driver
[ 6.915158] rk860-regulator 0-0042: Looking up vin-supply from device tree
[ 6.915164] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[ 6.915172] vcc5v0_sys: could not add device link regulator.27: -ENOENT
[ 6.919219] vdd_cpu_big0_s0: 550 <--> 1050 mV at 800 mV, enabled
[ 6.923573] rk860-regulator 0-0043: Looking up vin-supply from device tree
[ 6.923576] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[ 6.923582] vcc5v0_sys: could not add device link regulator.28: -ENOENT
[ 6.927624] vdd_cpu_big1_s0: 550 <--> 1050 mV at 800 mV, enabled
[ 6.932360] rk860-regulator 2-0042: Looking up vin-supply from device tree
[ 6.932365] vdd_npu_s0: supplied by vcc5v0_sys
[ 6.932373] vcc5v0_sys: could not add device link regulator.29: -ENOENT
[ 6.934935] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 6.934947] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
[ 6.935028] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000082002010010
[ 6.935047] xhci-hcd xhci-hcd.5.auto: irq 104, io mem 0xfc000000
[ 6.935173] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 6.935179] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.935183] usb usb3: Product: xHCI Host Controller
[ 6.935187] usb usb3: Manufacturer: Linux 5.10.110 xhci-hcd
[ 6.935191] usb usb3: SerialNumber: xhci-hcd.5.auto
[ 6.935389] hub 3-0:1.0: USB hub found
[ 6.935403] hub 3-0:1.0: 1 port detected
[ 6.935499] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[ 6.935507] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
[ 6.935515] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[ 6.935541] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.935581] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 6.935586] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.935590] usb usb4: Product: xHCI Host Controller
[ 6.935595] usb usb4: Manufacturer: Linux 5.10.110 xhci-hcd
[ 6.935599] usb usb4: SerialNumber: xhci-hcd.5.auto
[ 6.935793] hub 4-0:1.0: USB hub found
[ 6.935806] hub 4-0:1.0: 1 port detected
[ 6.936450] vdd_npu_s0: 550 <--> 950 mV at 800 mV, enabled
[ 6.940095] IR NEC protocol handler initialized
[ 6.943520] __power_supply_register: Expected proper parent device for 'test_ac'
[ 6.943767] __power_supply_register: Expected proper parent device for 'test_battery'
[ 6.944194] __power_supply_register: Expected proper parent device for 'test_usb'
[ 6.945939] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[ 6.946868] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[ 6.947395] device-mapper: uevent: version 1.0.3
[ 6.947656] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[ 6.948018] cpu cpu0: Looking up cpu-supply from device tree
[ 6.948640] cpu cpu0: bin=0
[ 6.948837] cpu cpu0: leakage=14
[ 6.948877] cpu cpu0: Looking up cpu-supply from device tree
[ 6.950413] cpu cpu0: pvtm=1478
[ 6.950595] cpu cpu0: pvtm-volt-sel=3
[ 6.950714] cpu cpu0: Looking up cpu-supply from device tree
[ 6.950915] cpu cpu0: Looking up mem-supply from device tree
[ 6.951185] cpu cpu4: Looking up cpu-supply from device tree
[ 6.953016] cpu cpu4: bin=0
[ 6.953213] cpu cpu4: leakage=11
[ 6.953251] cpu cpu4: Looking up cpu-supply from device tree
[ 6.959895] cpu cpu4: pvtm=1715
[ 6.963960] cpu cpu4: pvtm-volt-sel=5
[ 6.964024] cpu cpu4: Looking up cpu-supply from device tree
[ 6.964591] cpu cpu4: Looking up mem-supply from device tree
[ 6.965224] cpu cpu6: Looking up cpu-supply from device tree
[ 6.967043] cpu cpu6: bin=0
[ 6.967240] cpu cpu6: leakage=11
[ 6.967277] cpu cpu6: Looking up cpu-supply from device tree
[ 6.973906] cpu cpu6: pvtm=1724
[ 6.978028] cpu cpu6: pvtm-volt-sel=5
[ 6.978094] cpu cpu6: Looking up cpu-supply from device tree
[ 6.978684] cpu cpu6: Looking up mem-supply from device tree
[ 6.980608] cpu cpu0: avs=0
[ 6.982337] cpu cpu4: avs=0
[ 6.984071] cpu cpu6: avs=0
[ 6.984486] cpu cpu0: EM: OPP:816000 is inefficient
[ 6.984493] cpu cpu0: EM: OPP:600000 is inefficient
[ 6.984672] cpu cpu0: EM: created perf domain
[ 6.984755] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[ 6.985626] cpu cpu4: EM: OPP:816000 is inefficient
[ 6.985634] cpu cpu4: EM: OPP:600000 is inefficient
[ 6.985913] cpu cpu4: EM: created perf domain
[ 6.985993] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[ 6.994546] cpu cpu6: EM: OPP:816000 is inefficient
[ 6.994554] cpu cpu6: EM: OPP:600000 is inefficient
[ 6.994865] cpu cpu6: EM: created perf domain
[ 6.995702] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[ 7.005990] sdhci: Secure Digital Host Controller Interface driver
[ 7.006013] sdhci: Copyright(c) Pierre Ossman
[ 7.006023] Synopsys Designware Multimedia Card Interface Driver
[ 7.006807] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.008227] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
[ 7.008236] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
[ 7.008252] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
[ 7.008259] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
[ 7.009401] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.009427] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[ 7.009461] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
[ 7.009756] hid: raw HID events driver (C) Jiri Kosina
[ 7.009941] usbcore: registered new interface driver usbhid
[ 7.009946] usbhid: USB HID core driver
[ 7.010239] ashmem: initialized
[ 7.011863] rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
[ 7.013234] optee: probing for conduit method.
[ 7.013257] optee: revision 3.13 (87d94c5e)
[ 7.013870] optee: initialized driver
[ 7.017828] Initializing XFRM netlink socket
[ 7.017849] IPsec XFRM device driver
[ 7.018033] NET: Registered protocol family 10
[ 7.018781] Segment Routing with IPv6
[ 7.023319] bpfilter: Loaded bpfilter_umh pid 225
[ 7.023804] NET: Registered protocol family 17
[ 7.023938] Bluetooth: RFCOMM TTY layer initialized
[ 7.023946] Bluetooth: RFCOMM socket layer initialized
[ 7.023959] Bluetooth: RFCOMM ver 1.11
[ 7.023967] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 7.023974] Bluetooth: HIDP socket layer initialized
[ 7.024001] [BT_RFKILL]: Enter rfkill_rk_init
[ 7.024005] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 7.024373] Key type dns_resolver registered
[ 7.025288] registered taskstats version 1
[ 7.025301] Loading compiled-in X.509 certificates
[ 7.025500] pstore: Using crash dump compression: deflate
[ 7.025719] rga3_core0 fdb60000.rga: Adding to iommu group 2
[ 7.025903] rga: rga3_core0_irq, irq = 32, match scheduler
[ 7.026243] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
[ 7.026294] rga: rga3_core0 probe successfully
[ 7.026552] rga3_core1 fdb70000.rga: Adding to iommu group 3
[ 7.026724] rga: rga3_core1_irq, irq = 33, match scheduler
[ 7.027079] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
[ 7.027130] rga: rga3_core1 probe successfully
[ 7.027428] rga: rga2_irq, irq = 34, match scheduler
[ 7.027716] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[ 7.027731] rga: rga2 probe successfully
[ 7.027906] rga2_mmu: IOMMU binding successfully, default mapping core[0x1]
[ 7.028130] rga: Module initialized. v1.2.20
[ 7.028136]
[ 7.028140] ********************************************************************
[ 7.028144] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 7.028148] ** **
[ 7.028152] ** WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[ 7.028156] ** **
[ 7.028159] ** This means that this kernel is built to expose clk operations **
[ 7.028163] ** such as parent or rate setting, enabling, disabling, etc. **
[ 7.028167] ** to userspace, which may compromise security on your system. **
[ 7.028170] ** **
[ 7.028174] ** If you see this message and you are not debugging the **
[ 7.028178] ** kernel, report this immediately to your vendor! **
[ 7.028181] ** **
[ 7.028185] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 7.028189] ********************************************************************
[ 7.037476] mmc2: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[ 7.053498] friendlyelec-board board: Serial : 3140b86dc423aec1
[ 7.054800] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
[ 7.054989] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
[ 7.054994] reg-fixed-voltage vcc-3v3-sd-s0-regulator: Looking up vin-supply from device tree
[ 7.055008] vcc_3v3_sd_s0: supplied by vcc_3v3_s3
[ 7.055033] vcc_3v3_s3: could not add device link regulator.30: -ENOENT
[ 7.055227] mali fb000000.gpu: Kernel DDK version g13p0-01eac0
[ 7.055272] mali fb000000.gpu: Looking up mali-supply from device tree
[ 7.055501] mali fb000000.gpu: Looking up mem-supply from device tree
[ 7.055607] vcc_3v3_sd_s0: 3000 mV, enabled
[ 7.055629] mali fb000000.gpu: Looking up mali-supply from device tree
[ 7.055655] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[ 7.055661] vdd_gpu_s0: Failed to create debugfs directory
[ 7.055670] mali fb000000.gpu: Looking up mem-supply from device tree
[ 7.055689] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[ 7.055694] vdd_gpu_s0: Failed to create debugfs directory
[ 7.055776] reg-fixed-voltage vcc-3v3-sd-s0-regulator: vcc_3v3_sd_s0 supplying 3000000uV
[ 7.055854] mali fb000000.gpu: Looking up mali-supply from device tree
[ 7.055881] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[ 7.055887] vdd_gpu_s0: Failed to create debugfs directory
[ 7.055908] reg-fixed-voltage vcc3v3-pcie20: Looking up vin-supply from device tree
[ 7.055919] vcc_3v3_pcie20: supplied by vcc_3v3_s3
[ 7.055932] vcc_3v3_s3: could not add device link regulator.31: -ENOENT
[ 7.056177] mali fb000000.gpu: leakage=23
[ 7.056228] mali fb000000.gpu: Looking up mali-supply from device tree
[ 7.056252] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[ 7.056568] vcc_3v3_pcie20: 3300 mV, enabled
[ 7.056736] reg-fixed-voltage vcc3v3-pcie20: vcc_3v3_pcie20 supplying 3300000uV
[ 7.057200] rockchip-dmc dmc: Looking up center-supply from device tree
[ 7.057742] rockchip-dmc dmc: Looking up mem-supply from device tree
[ 7.058197] rockchip-dmc dmc: Looking up center-supply from device tree
[ 7.058223] vdd_ddr_s0: could not add device link dmc: -EEXIST
[ 7.058226] vdd_ddr_s0: Failed to create debugfs directory
[ 7.058339] mali fb000000.gpu: pvtm=895
[ 7.058424] mali fb000000.gpu: pvtm-volt-sel=4
[ 7.058576] rockchip-dmc dmc: Looking up mem-supply from device tree
[ 7.058608] vdd_log_s0: could not add device link dmc: -EEXIST
[ 7.058612] vdd_log_s0: Failed to create debugfs directory
[ 7.059101] rockchip-dmc dmc: leakage=48
[ 7.059118] rockchip-dmc dmc: leakage-volt-sel=2
[ 7.059568] rockchip-dmc dmc: avs=0
[ 7.059584] rockchip-dmc dmc: current ATF version 0x100
[ 7.059702] rockchip-dmc dmc: normal_rate = 1560000000
[ 7.059710] rockchip-dmc dmc: reboot_rate = 2112000000
[ 7.059717] rockchip-dmc dmc: suspend_rate = 528000000
[ 7.059724] rockchip-dmc dmc: video_4k_rate = 1560000000
[ 7.059731] rockchip-dmc dmc: video_4k_10b_rate = 1560000000
[ 7.059738] rockchip-dmc dmc: video_svep_rate = 1560000000
[ 7.059746] rockchip-dmc dmc: boost_rate = 2112000000
[ 7.059753] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
[ 7.059760] rockchip-dmc dmc: performance_rate = 2112000000
[ 7.059768] rockchip-dmc dmc: hdmirx_rate = 2112000000
[ 7.059779] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[ 7.059785] rockchip-dmc dmc: failed to get vop pn to msch rl
[ 7.059854] mali fb000000.gpu: avs=0
[ 7.059905] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 7.059921] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[ 7.060849] rockchip-dmc dmc: could not find power_model node
[ 7.060990] mali fb000000.gpu: GPU hardware issue table may need updating:
[ 7.060990] r0p0 status 5 is unknown; treating as r0p0 status 0
[ 7.061012] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[ 7.061131] mali fb000000.gpu: No priority control manager is configured
[ 7.061146] mali fb000000.gpu: No memory group manager is configured
[ 7.061272] mali fb000000.gpu: Protected memory allocator not available
[ 7.061889] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[ 7.062917] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[ 7.062939] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[ 7.063386] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[ 7.063867] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[ 7.064242] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[ 7.069274] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
[ 7.069484] rk-pcie fe180000.pcie: invalid prsnt-gpios property in node
[ 7.069533] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[ 7.069759] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node
[ 7.069781] rk-pcie fe190000.pcie: Looking up vpcie3v3-supply from device tree
[ 7.070648] rk-pcie fe190000.pcie: missing legacy IRQ resource
[ 7.070666] rk-pcie fe190000.pcie: IRQ msi not found
[ 7.070674] rk-pcie fe190000.pcie: use outband MSI support
[ 7.070683] rk-pcie fe190000.pcie: Missing *config* reg space
[ 7.070728] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges:
[ 7.070767] rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000
[ 7.070782] rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[ 7.070797] rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
[ 7.070812] rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000
[ 7.070863] rk-pcie fe190000.pcie: Missing *config* reg space
[ 7.070902] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[ 7.070929] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[ 7.070940] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[ 7.070966] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 76,32 bit host data width,256 deep fifo
[ 7.070993] rk-pcie fe190000.pcie: invalid resource
[ 7.071039] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
[ 7.071123] dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
[ 7.071439] mali fb000000.gpu: Probed as mali0
[ 7.071774] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
[ 7.071799] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
[ 7.071838] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply from device tree
[ 7.071856] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply property in node /power-management@fd8d8000/power-controller failed
[ 7.071889] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
[ 7.071910] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
[ 7.072463] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[ 7.072989] vccio_sd_s0: ramp_delay not set
[ 7.073840] RKNPU fdab0000.npu: Adding to iommu group 0
[ 7.074010] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[ 7.074092] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[ 7.074728] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 7.074775] RKNPU fdab0000.npu: Looking up mem-supply from device tree
[ 7.075240] mmcblk2: mmc2:0001 A3A551 28.9 GiB
[ 7.075434] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[ 7.075451] mmcblk2boot0: mmc2:0001 A3A551 partition 1 4.00 MiB
[ 7.075460] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[ 7.075475] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[ 7.075652] mmcblk2boot1: mmc2:0001 A3A551 partition 2 4.00 MiB
[ 7.075834] mmcblk2rpmb: mmc2:0001 A3A551 partition 3 16.0 MiB, chardev (237:0)
[ 7.076395] [drm] Initialized rknpu 0.8.2 20220829 for fdab0000.npu on minor 1
[ 7.076703] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
[ 7.076729] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
[ 7.076810] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
[ 7.076828] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
[ 7.076886] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
[ 7.076903] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
[ 7.077054] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[ 7.077072] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[ 7.077075] vdd_npu_s0: Failed to create debugfs directory
[ 7.077652] RKNPU fdab0000.npu: Looking up mem-supply from device tree
[ 7.077696] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[ 7.077699] vdd_npu_s0: Failed to create debugfs directory
[ 7.078451] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[ 7.078491] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[ 7.078494] vdd_npu_s0: Failed to create debugfs directory
[ 7.078872] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 7.080525] RKNPU fdab0000.npu: leakage=12
[ 7.080583] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[ 7.080620] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[ 7.086681] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 7.087849] RKNPU fdab0000.npu: pvtm=901
[ 7.091808] RKNPU fdab0000.npu: pvtm-volt-sel=4
[ 7.092462] RKNPU fdab0000.npu: avs=0
[ 7.092597] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[ 7.101214] RKNPU fdab0000.npu: failed to find power_model node
[ 7.101234] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[ 7.101242] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[ 7.103139] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[ 7.103646] ALSA device list:
[ 7.103653] #0: rockchip,hdmi0
[ 7.111172] Freeing unused kernel memory: 10944K
[ 7.155427] Run /init as init process
[ 7.155469] with arguments:
[ 7.155475] /init
[ 7.155481] with environment:
[ 7.155485] HOME=/
[ 7.155490] TERM=linux
[ 7.155493] storagemedia=sd
[ 7.155499] data=/dev/mmcblk0p9
[ 7.155504] cgroup_enable=memory
[ 7.155509] cgroup_memory=1
[ 7.165641] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0)
[ 7.165987] mmc0: new high speed SDHC card at address aaaa
[ 7.169084] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
[ 7.178683] vendor storage:20190527 ret = 0
[ 7.185086] rk-pcie fe180000.pcie: Looking up vpcie3v3-supply from device tree
[ 7.185547] rk-pcie fe180000.pcie: missing legacy IRQ resource
[ 7.185578] rk-pcie fe180000.pcie: IRQ msi not found
[ 7.185587] rk-pcie fe180000.pcie: use outband MSI support
[ 7.185595] rk-pcie fe180000.pcie: Missing *config* reg space
[ 7.185611] rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:
[ 7.185639] rk-pcie fe180000.pcie: err 0x00f3000000..0x00f30fffff -> 0x00f3000000
[ 7.185656] rk-pcie fe180000.pcie: IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
[ 7.185673] rk-pcie fe180000.pcie: MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
[ 7.185684] rk-pcie fe180000.pcie: MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000
[ 7.185755] rk-pcie fe180000.pcie: Missing *config* reg space
[ 7.185806] rk-pcie fe180000.pcie: invalid resource
[ 7.192566] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 7.192650] GPT:1953123 != 7744511
[ 7.192669] GPT:Alternate GPT header not at the end of the disk.
[ 7.192690] GPT:1953123 != 7744511
[ 7.192708] GPT: Use GNU Parted to correct GPT errors.
[ 7.192830] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 7.355149] rk-pcie fe190000.pcie: PCIe Link up, LTSSM is 0x130011
[ 7.355580] rk-pcie fe190000.pcie: PCI host bridge to bus 0004:40
[ 7.355611] pci_bus 0004:40: root bus resource [bus 40-4f]
[ 7.355632] pci_bus 0004:40: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0]
[ 7.355653] pci_bus 0004:40: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
[ 7.355671] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff]
[ 7.355689] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff pref]
[ 7.355762] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400
[ 7.355809] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 7.355916] pci 0004:40:00.0: supports D1 D2
[ 7.355935] pci 0004:40:00.0: PME# supported from D0 D1 D3hot
[ 7.370823] pci 0004:40:00.0: Primary bus is hard wired to 0
[ 7.370865] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 7.371219] pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000
[ 7.371295] pci 0004:41:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[ 7.371309] pci 0004:41:00.0: reg 0x10: [io size 0x0100]
[ 7.371390] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 7.371446] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 7.371882] pci 0004:41:00.0: supports D1 D2
[ 7.371895] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7.406722] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
[ 7.406799] pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
[ 7.406818] pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
[ 7.406834] pci 0004:40:00.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 7.406859] pci 0004:41:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit]
[ 7.406912] pci 0004:41:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit]
[ 7.406960] pci 0004:41:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 7.406988] pci 0004:40:00.0: PCI bridge to [bus 41]
[ 7.407003] pci 0004:40:00.0: bridge window [io 0x1000-0x1fff]
[ 7.407021] pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf42fffff]
[ 7.410659] pcieport 0004:40:00.0: PME: Signaling with IRQ 115
[ 7.494848] rk-pcie fe180000.pcie: PCIe Link up, LTSSM is 0x130011
[ 7.495020] rk-pcie fe180000.pcie: PCI host bridge to bus 0003:30
[ 7.495030] pci_bus 0003:30: root bus resource [bus 30-3f]
[ 7.495038] pci_bus 0003:30: root bus resource [??? 0xf3000000-0xf30fffff flags 0x0]
[ 7.495047] pci_bus 0003:30: root bus resource [io 0x100000-0x1fffff] (bus address [0xf3100000-0xf31fffff])
[ 7.495053] pci_bus 0003:30: root bus resource [mem 0xf3200000-0xf3ffffff]
[ 7.495060] pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff pref]
[ 7.495092] pci 0003:30:00.0: [1d87:3588] type 01 class 0x060400
[ 7.495111] pci 0003:30:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 7.495159] pci 0003:30:00.0: supports D1 D2
[ 7.495165] pci 0003:30:00.0: PME# supported from D0 D1 D3hot
[ 7.501814] pci 0003:30:00.0: Primary bus is hard wired to 0
[ 7.501834] pci 0003:30:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 7.502048] pci 0003:31:00.0: [10ec:8125] type 00 class 0x020000
[ 7.502105] pci 0003:31:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 7.502169] pci 0003:31:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 7.502211] pci 0003:31:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 7.502570] pci 0003:31:00.0: supports D1 D2
[ 7.502576] pci 0003:31:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7.539762] pci_bus 0003:31: busn_res: [bus 31-3f] end is updated to 31
[ 7.539808] pci 0003:30:00.0: BAR 8: assigned [mem 0xf3200000-0xf32fffff]
[ 7.539816] pci 0003:30:00.0: BAR 6: assigned [mem 0xf3300000-0xf330ffff pref]
[ 7.539822] pci 0003:30:00.0: BAR 7: assigned [io 0x100000-0x100fff]
[ 7.539831] pci 0003:31:00.0: BAR 2: assigned [mem 0xf3200000-0xf320ffff 64bit]
[ 7.539868] pci 0003:31:00.0: BAR 4: assigned [mem 0xf3210000-0xf3213fff 64bit]
[ 7.539904] pci 0003:31:00.0: BAR 0: assigned [io 0x100000-0x1000ff]
[ 7.539920] pci 0003:30:00.0: PCI bridge to [bus 31]
[ 7.539926] pci 0003:30:00.0: bridge window [io 0x100000-0x100fff]
[ 7.539932] pci 0003:30:00.0: bridge window [mem 0xf3200000-0xf32fffff]
[ 7.541370] pcieport 0003:30:00.0: PME: Signaling with IRQ 125
[ 8.305729] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[ 9.083200] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
[ 10.018849] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
[ 10.221296] overlayfs: "xino" feature enabled using 32 upper inode bits.
[ 10.462916] init: Console is alive
[ 15.838090] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 15.852930] Key type encrypted registered
[ 16.084975] raid6: neonx8 gen() 756 MB/s
[ 16.254955] raid6: neonx8 xor() 560 MB/s
[ 16.424977] raid6: neonx4 gen() 750 MB/s
[ 16.594941] raid6: neonx4 xor() 548 MB/s
[ 16.764960] raid6: neonx2 gen() 738 MB/s
[ 16.935076] raid6: neonx2 xor() 506 MB/s
[ 17.104956] raid6: neonx1 gen() 541 MB/s
[ 17.274961] raid6: neonx1 xor() 384 MB/s
[ 17.444926] raid6: int64x8 gen() 456 MB/s
[ 17.614947] raid6: int64x8 xor() 245 MB/s
[ 17.784840] raid6: int64x4 gen() 549 MB/s
[ 17.954974] raid6: int64x4 xor() 281 MB/s
[ 18.124955] raid6: int64x2 gen() 497 MB/s
[ 18.294956] raid6: int64x2 xor() 250 MB/s
[ 18.464937] raid6: int64x1 gen() 347 MB/s
[ 18.634982] raid6: int64x1 xor() 192 MB/s
[ 18.635024] raid6: using algorithm neonx8 gen() 756 MB/s
[ 18.635048] raid6: .... xor() 560 MB/s, rmw enabled
[ 18.635071] raid6: using neon recovery algorithm
[ 18.646058] xor: measuring software checksum speed
[ 18.650236] 8regs : 2376 MB/sec
[ 18.653632] 32regs : 2909 MB/sec
[ 18.656388] arm64_neon : 3663 MB/sec
[ 18.656404] xor: using function: arm64_neon (3663 MB/sec)
[ 18.823456] Btrfs loaded, crc32c=crc32c-generic
[ 18.831013] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 18.839495] init: - preinit -
[ 24.475383] mount_root: mounting /dev/root
[ 24.506123] mount_root: loading kmods from internal overlay
[ 24.669332] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 24.671128] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 25.068773] block: attempting to load /etc/config/fstab
[ 25.070247] block: unable to load configuration (fstab: Entry not found)
[ 25.070330] block: no usable configuration
[ 25.072747] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 25.603357] procd: - early -
[ 26.644299] procd: - ubus -
[ 26.697583] procd: - init -
[ 27.034018] urngd: v1.0.2 started.
[ 27.373161] kmodloader: loading kernel modules from /etc/modules.d/*
[ 27.399331] at24 6-0053: Looking up vcc-supply from device tree
[ 27.399353] at24 6-0053: Looking up vcc-supply property in node /i2c@fec80000/eeprom@53 failed
[ 27.399401] at24 6-0053: supply vcc not found, using dummy regulator
[ 27.498070] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 27.503707] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 27.506632] [dhd] STATIC-MSG) dhd_static_buf_init : 101.10.361.18 (wlan=r892223-20220519-1)
[ 27.507020] [dhd] STATIC-MSG) dhd_init_wlan_mem : prealloc ok for index 0: 8131584(7941K)
[ 27.681966] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.361.20 (wlan=r892223-20220701-3)
[ 27.681966] drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Oct 31 2022 at 19:05:38
[ 27.681966]
[ 27.682038] [dhd] ANDROID_VERSION = 12
[ 27.682048] [dhd] ======== dhd_wlan_init_plat_data ========
[ 27.682057] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 27.682064] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: rfkill-wlan driver has not Successful initialized
[ 27.682070] dhd_wlan_init_gpio: unknown oob irqflags !
[ 27.682077] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=-1, oob_irq_flags=0x0
[ 27.682082] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 27.682089] [dhd] dhd_wifi_platform_load: Enter
[ 27.682203] [dhd] No Broadcom PCI device enumerated!
[ 27.682244] [dhd] dhd_wifi_platform_load_pcie: pcie_register_driver failed
[ 27.682252] [dhd] unregister wifi platform drivers
[ 27.682258] [dhd] wifi_platform_bus_enumerate device present 0
[ 27.682263] [dhd] ======== Card detection to remove PCIE card! ========
[ 27.682268] [dhd] ======== dhd_wlan_deinit_plat_data ========
[ 27.682273] [dhd] dhd_wlan_deinit_gpio: gpio_free(WL_HOST_WAKE 0)
[ 27.682285] [dhd] _dhd_module_init: Failed to load the driver, try cnt 0
[ 27.682314] [dhd] _dhd_module_init: Failed to load driver max retry reached**
[ 27.682321] [dhd] _dhd_module_init: Exit err=-1
[ 27.713552] Intel(R) Wireless WiFi driver for Linux
[ 27.804117] usbcore: registered new interface driver mt76x2u
[ 27.811650] r8125: loading out-of-tree module taints kernel.
[ 27.814001] r8125 2.5Gigabit Ethernet driver 9.009.00-NAPI loaded
[ 27.814126] r8125 0004:41:00.0: enabling device (0000 -> 0003)
[ 27.832304] r8125 0004:41:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
[ 27.832334] r8125 0004:41:00.0 (unnamed net_device) (uninitialized): Random ether addr 5e:54:21:ea:ec:73
[ 27.833382] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 27.835419] r8125 Copyright (C) 2022 Realtek NIC software team <nicfae@realtek.com>
[ 27.835419] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 27.835419] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 27.835761] r8125 2.5Gigabit Ethernet driver 9.009.00-NAPI loaded
[ 27.835853] r8125 0003:31:00.0: enabling device (0000 -> 0003)
[ 27.854838] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 27.856884] r8125 Copyright (C) 2022 Realtek NIC software team <nicfae@realtek.com>
[ 27.856884] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 27.856884] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 27.864458] usbcore: registered new interface driver r8152
[ 28.205276] usbcore: registered new interface driver 88XXau
[ 28.375690] usbcore: registered new interface driver rtl8821cu
[ 28.613734] usbcore: registered new interface driver rtl88x2bu
[ 29.974077] NET: Registered protocol family 8
[ 29.974178] NET: Registered protocol family 20
[ 29.994510] NET: Registered protocol family 15
[ 30.009526] tun: Universal TUN/TAP device driver, 1.6
[ 30.047949] l2tp_core: L2TP core driver, V2.0
[ 30.051064] l2tp_netlink: L2TP netlink interface
[ 30.064284] gre: GRE over IPv4 demultiplexor driver
[ 30.067669] ip_gre: GRE over IPv4 tunneling driver
[ 30.195639] cryptodev: driver 1.12 loaded.
[ 30.245404] rtc-hym8563 6-0051: rtc information is invalid
[ 30.250744] rtc-hym8563 6-0051: registered as rtc0
[ 30.251468] rtc-hym8563 6-0051: setting system clock to 2021-01-01T12:00:00 UTC (1609502400)
[ 30.263447] GACT probability on
[ 30.266293] Mirror/redirect action on
[ 30.284741] u32 classifier
[ 30.284774] input device check on
[ 30.284782] Actions configured
[ 30.366851] usbcore: registered new interface driver cdc_ncm
[ 30.372627] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 30.469912] PPP MPPE Compression module registered
[ 30.470987] NET: Registered protocol family 24
[ 30.472195] PPTP driver version 0.8.5
[ 30.520140] xt_time: kernel timezone is -0000
[ 30.547227] usbcore: registered new interface driver brcmfmac
[ 30.565760] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 30.568067] usbcore: registered new interface driver cdc_mbim
[ 30.572423] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 30.589301] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 30.589331] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 30.591112] Bridge firewalling registered
[ 30.592645] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 73.307053] fullcone nft_fullcone: failed to register a conntrack notifier. Disable active GC for mappings.
[ 74.258838] eth1: 0xffff800013e80000, fa:8c:09:05:71:0e, IRQ 106
[ 74.308513] br-lan: port 1(eth1) entered blocking state
[ 74.308544] br-lan: port 1(eth1) entered disabled state
[ 74.308841] device eth1 entered promiscuous mode
[ 74.345021] rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 74.350926] dwmac4: Master AXI performs any burst length
[ 74.350990] rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
[ 74.351022] rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 74.351593] rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
[ 74.352035] rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 74.396473] br-lan: port 2(eth0) entered blocking state
[ 74.396504] br-lan: port 2(eth0) entered disabled state
[ 74.396802] device eth0 entered promiscuous mode
[ 74.396987] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 74.455004] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 74.455649] br-lan: port 2(eth0) entered blocking state
[ 74.455665] br-lan: port 2(eth0) entered disabled state
[ 74.455998] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 74.505070] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 74.505885] br-lan: port 2(eth0) entered blocking state
[ 74.505919] br-lan: port 2(eth0) entered disabled state
[ 74.506387] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 74.555023] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 74.555735] br-lan: port 2(eth0) entered blocking state
[ 74.555753] br-lan: port 2(eth0) entered disabled state
[ 74.556098] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 74.605068] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 74.641741] eth2: 0xffff800013ea0000, fa:8c:09:05:71:0d, IRQ 116
[ 74.745114] rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 74.867939] dwmac4: Master AXI performs any burst length
[ 74.868023] rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
[ 74.868070] rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 74.868498] rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
[ 74.868545] rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 74.906746] br-lan: port 2(eth0) entered blocking state
[ 74.906793] br-lan: port 2(eth0) entered disabled state
[ 74.907348] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 74.944988] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 74.946389] br-lan: port 2(eth0) entered blocking state
[ 74.946430] br-lan: port 2(eth0) entered disabled state
[ 74.947124] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 75.014958] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 75.016190] br-lan: port 2(eth0) entered blocking state
[ 75.016237] br-lan: port 2(eth0) entered disabled state
[ 75.016977] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 75.115149] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 75.116365] br-lan: port 2(eth0) entered blocking state
[ 75.116409] br-lan: port 2(eth0) entered disabled state
[ 75.117133] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 75.195032] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 90.371857] overlayfs: filesystem on '/opt/docker/check-overlayfs-support3029277735/upper' not supported as upperdir
[ 90.378479] overlayfs: filesystem on '/opt/docker/check-overlayfs-support2392801280/upper' not supported as upperdir
[ 190.893400] r8125: eth2: link up
[ 190.893483] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 293.683033] r8125: eth2: link down
[ 306.890210] r8125: eth1: link up
[ 306.890333] br-lan: port 1(eth1) entered blocking state
[ 306.890348] br-lan: port 1(eth1) entered forwarding state
[ 306.890538] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 418.477615] r8125: eth1: link down
[ 418.485797] br-lan: port 1(eth1) entered disabled state
[ 452.565536] r8125: eth1: link up
[ 452.565679] br-lan: port 1(eth1) entered blocking state
[ 452.565693] br-lan: port 1(eth1) entered forwarding state
[ 588.476670] rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 588.705662] dwmac4: Master AXI performs any burst length
[ 588.705740] rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
[ 588.705854] rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 588.706454] rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
[ 588.706573] rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 600.076668] r8125: eth1: link down
[ 600.084260] br-lan: port 1(eth1) entered disabled state
[ 602.240771] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 602.240954] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 627.197315] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Down
[ 637.600014] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 641.757235] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Down
[ 645.765029] r8125: eth1: link up
[ 645.765167] br-lan: port 1(eth1) entered blocking state
[ 645.765183] br-lan: port 1(eth1) entered forwarding state
[ 691.836636] r8125: eth1: link down
[ 691.844243] br-lan: port 1(eth1) entered disabled state
[ 903.605013] r8125: eth1: link up
[ 903.605160] br-lan: port 1(eth1) entered blocking state
[ 903.605176] br-lan: port 1(eth1) entered forwarding state
[ 933.596621] r8125: eth1: link down
[ 933.604905] br-lan: port 1(eth1) entered disabled state
[ 937.119975] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1034.877339] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Down
[ 1041.765009] r8125: eth1: link up
[ 1041.765158] br-lan: port 1(eth1) entered blocking state
[ 1041.765175] br-lan: port 1(eth1) entered forwarding state
[ 1115.487316] br-lan: port 1(eth1) entered disabled state
[ 1115.492563] device eth1 left promiscuous mode
[ 1115.492749] br-lan: port 1(eth1) entered disabled state
[ 1115.908034] eth1: 0xffff800013e80000, fa:8c:09:05:71:0e, IRQ 106
[ 1115.956176] br-lan: port 1(eth1) entered blocking state
[ 1115.956221] br-lan: port 1(eth1) entered disabled state
[ 1115.956743] device eth1 entered promiscuous mode
[ 1115.961076] br-lan: port 1(eth1) entered blocking state
[ 1115.961113] br-lan: port 1(eth1) entered forwarding state
[ 1116.557033] br-lan: port 1(eth1) entered disabled state
[ 1120.645025] r8125: eth1: link up
[ 1120.645263] br-lan: port 1(eth1) entered blocking state
[ 1120.645288] br-lan: port 1(eth1) entered forwarding state
[ 1167.245824] br-lan: port 1(eth1) entered disabled state
[ 1167.247465] device eth1 left promiscuous mode
[ 1167.247666] br-lan: port 1(eth1) entered disabled state
[ 1167.498153] eth1: 0xffff800013e80000, 5e:54:21:ea:ec:73, IRQ 106
[ 1167.545571] br-lan: port 1(eth1) entered blocking state
[ 1167.545625] br-lan: port 1(eth1) entered disabled state
[ 1167.546408] device eth1 entered promiscuous mode
[ 1172.805030] r8125: eth1: link up
[ 1172.805275] br-lan: port 1(eth1) entered blocking state
[ 1172.805300] br-lan: port 1(eth1) entered forwarding state
[ 1172.805953] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 1185.627600] eth2: 0xffff800013ea0000, 5a:bc:ad:88:6c:74, IRQ 116
[ 1202.076725] rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 1202.302587] dwmac4: Master AXI performs any burst length
[ 1202.302656] rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
[ 1202.302686] rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 1202.302997] rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
[ 1202.303028] rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 1202.337977] br-lan: port 2(eth0) entered blocking state
[ 1202.338019] br-lan: port 2(eth0) entered disabled state
[ 1202.339113] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 1202.436611] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 1202.437251] br-lan: port 2(eth0) entered blocking state
[ 1202.437267] br-lan: port 2(eth0) entered disabled state
[ 1202.437638] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 1202.496623] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 1202.497570] br-lan: port 2(eth0) entered blocking state
[ 1202.497588] br-lan: port 2(eth0) entered disabled state
[ 1202.497999] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 1202.536709] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 1202.537632] br-lan: port 2(eth0) entered blocking state
[ 1202.537650] br-lan: port 2(eth0) entered disabled state
[ 1202.538278] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 1202.576856] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 1202.736824] rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 1202.850249] dwmac4: Master AXI performs any burst length
[ 1202.850338] rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
[ 1202.850389] rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 1202.850996] rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
[ 1202.851046] rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 1202.888157] br-lan: port 2(eth0) entered blocking state
[ 1202.888211] br-lan: port 2(eth0) entered disabled state
[ 1202.889296] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 1202.926611] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 1202.927831] br-lan: port 2(eth0) entered blocking state
[ 1202.927878] br-lan: port 2(eth0) entered disabled state
[ 1202.928803] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 1202.966621] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 1202.967778] br-lan: port 2(eth0) entered blocking state
[ 1202.967827] br-lan: port 2(eth0) entered disabled state
[ 1202.968739] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 1203.026776] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 1203.027892] br-lan: port 2(eth0) entered blocking state
[ 1203.027938] br-lan: port 2(eth0) entered disabled state
[ 1203.028828] rk_gmac-dwmac fe1c0000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 1203.096748] rk_gmac-dwmac fe1c0000.ethernet eth0: failed to initialize vlan filtering on this port
[ 1233.204459] br-lan: port 1(eth1) entered disabled state
[ 1233.209142] device eth1 left promiscuous mode
[ 1233.209285] br-lan: port 1(eth1) entered disabled state
[ 1233.416931] eth1: 0xffff800013e80000, 5e:54:21:ea:ec:73, IRQ 106
[ 1233.464265] br-lan: port 1(eth1) entered blocking state
[ 1233.464314] br-lan: port 1(eth1) entered disabled state
[ 1233.464971] device eth1 entered promiscuous mode
[ 1233.468674] br-lan: port 1(eth1) entered blocking state
[ 1233.468718] br-lan: port 1(eth1) entered forwarding state
[ 1234.236952] br-lan: port 1(eth1) entered disabled state
[ 1238.405005] r8125: eth1: link up
[ 1238.405190] br-lan: port 1(eth1) entered blocking state
[ 1238.405213] br-lan: port 1(eth1) entered forwarding state
[ 1243.516615] r8125: eth1: link down
[ 1243.525787] br-lan: port 1(eth1) entered disabled state
[ 1275.125014] r8125: eth1: link up
[ 1275.125204] br-lan: port 1(eth1) entered blocking state
[ 1275.125229] br-lan: port 1(eth1) entered forwarding state
[ 1398.866746] sh (19098): drop_caches: 3
[ 1572.026540] rk_gmac-dwmac fe1c0000.ethernet eth0: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 1572.265151] dwmac4: Master AXI performs any burst length
[ 1572.265201] rk_gmac-dwmac fe1c0000.ethernet eth0: No Safety Features support found
[ 1572.265229] rk_gmac-dwmac fe1c0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 1572.265553] rk_gmac-dwmac fe1c0000.ethernet eth0: registered PTP clock
[ 1572.265578] rk_gmac-dwmac fe1c0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 1684.636519] r8125: eth1: link down
[ 1684.643773] br-lan: port 1(eth1) entered disabled state
[ 1686.719356] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1686.719448] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1705.437002] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Down
[ 1710.639356] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1716.877040] rk_gmac-dwmac fe1c0000.ethernet eth0: Link is Down
[ 1720.884939] r8125: eth1: link up
[ 1720.885060] br-lan: port 1(eth1) entered blocking state
[ 1720.885070] br-lan: port 1(eth1) entered forwarding state
friendlyarm
22.03-docker version R6S 1G LAN port is unavailable