Nanopi R5C eth1 not getting ip from br-lan but from wan

dmesg root@thotawrt:~# dmesg [ 1.787129] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 1.787162] Linux version 6.1.25 (ubuntu@2faaeabbe029) (aarch64-linux-gnu-gcc (ctng-1.25.0-119g-FA) 11.3.0, GNU ld (GNU Binutils) 2.38) #1 SMP Fri Mar 29 11:57:58 CST 2024 [ 1.790480] Machine model: FriendlyElec NanoPi R5C [ 1.796193] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '') [ 1.799234] printk: bootconsole [uart8250] enabled [ 1.799885] Reserved memory: created CMA memory pool at 0x0000000010000000, size 8 MiB [ 1.800615] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 1.857533] Zone ranges: [ 1.857787] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 1.858363] DMA32 empty [ 1.858629] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 1.859199] Movable zone start for each node [ 1.859590] Early memory node ranges [ 1.859918] node 0: [mem 0x0000000000200000-0x00000000083fffff] [ 1.860495] node 0: [mem 0x0000000009400000-0x00000000efffffff] [ 1.861073] node 0: [mem 0x00000001f0000000-0x00000001ffffffff] [ 1.861649] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff] [ 1.863151] On node 0, zone DMA: 512 pages in unavailable ranges [ 1.890854] On node 0, zone DMA: 4096 pages in unavailable ranges [ 1.893647] psci: probing for conduit method from DT. [ 1.894683] psci: PSCIv1.1 detected in firmware. [ 1.895112] psci: Using standard PSCI v0.2 function IDs [ 1.895594] psci: Trusted OS migration not required [ 1.896050] psci: SMC Calling Convention v1.2 [ 1.896824] percpu: Embedded 28 pages/cpu s74232 r8192 d32264 u114688 [ 1.897443] pcpu-alloc: s74232 r8192 d32264 u114688 alloc=28*4096 [ 1.897455] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 1.897529] Detected VIPT I-cache on CPU0 [ 1.897944] CPU features: detected: GIC system register CPU interface [ 1.898536] CPU features: detected: Virtualization Host Extensions [ 1.899113] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 1.899871] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 1.900511] alternatives: applying boot alternatives [ 1.902764] Built 1 zonelists, mobility grouping on. Total pages: 1027656 [ 1.903411] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal androidboot.dtbo_idx=0 androidboot.verifiedbootstate=orange earlycon=uart8250,mmio32,0xfe660000 console=ttyFIQ0 coherent_pool=1m rw root=/dev/mmcblk2p8 rootfstype=ext4 data=/dev/mmcblk2p9 consoleblank=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [ 1.906791] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality. [ 1.908020] Unknown kernel command line parameters "storagemedia=emmc data=/dev/mmcblk2p9 cgroup_enable=memory cgroup_memory=1", will be passed to user space. [ 1.910335] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 1.911562] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 1.912280] mem auto-init: stack:off, heap alloc:off, heap free:off [ 1.912858] software IO TLB: area num 4. [ 1.945877] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB) [ 1.998196] Memory: 3972160K/4175872K available (17600K kernel code, 3466K rwdata, 5976K rodata, 7360K init, 929K bss, 195520K reserved, 8192K cma-reserved) [ 1.999616] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 2.000258] ftrace: allocating 58172 entries in 228 pages [ 2.079621] ftrace: allocated 228 pages with 4 groups [ 2.080249] trace event string verifier disabled [ 2.080909] rcu: Hierarchical RCU implementation. [ 2.081344] rcu: RCU event tracing is enabled. [ 2.081757] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 2.082352] Rude variant of Tasks RCU enabled. [ 2.082763] Tracing variant of Tasks RCU enabled. [ 2.083201] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 2.083893] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 2.089038] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 2.091131] GICv3: GIC: Using split EOI/Deactivate mode [ 2.091622] GICv3: 320 SPIs implemented [ 2.091976] GICv3: 0 Extended SPIs implemented [ 2.092414] Root IRQ handler: gic_handle_irq [ 2.092820] GICv3: GICv3 features: 16 PPIs [ 2.093233] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 2.094401] ITS [mem 0xfd440000-0xfd45ffff] [ 2.094854] ITS@0x00000000fd440000: allocated 8192 Devices @2810000 (indirect, esz 8, psz 64K, shr 0) [ 2.095718] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @2820000 (flat, esz 2, psz 64K, shr 0) [ 2.096662] ITS: using cache flushing for cmd queue [ 2.097530] GICv3: using LPI property table @0x0000000002830000 [ 2.098181] GIC: using cache flushing for LPI property table [ 2.098698] GICv3: CPU0: using allocated LPI pending table @0x0000000002840000 [ 2.099430] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 2.128083] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 2.128662] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 2.129646] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 2.131483] Console: colour dummy device 80x25 [ 2.131942] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 2.132889] pid_max: default: 32768 minimum: 301 [ 2.133376] LSM: Security Framework initializing [ 2.133898] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.134595] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.136222] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 2.137531] cblist_init_generic: Setting adjustable number of callback queues. [ 2.138245] cblist_init_generic: Setting shift to 2 and lim to 1. [ 2.138899] cblist_init_generic: Setting shift to 2 and lim to 1. [ 2.139654] rcu: Hierarchical SRCU implementation. [ 2.140090] rcu: Max phase no-delay instances is 1000. [ 2.141294] Platform MSI: interrupt-controller@fd440000 domain created [ 2.142441] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created [ 2.144142] smp: Bringing up secondary CPUs ... [ 2.145855] Detected VIPT I-cache on CPU1 [ 2.145928] cacheinfo: Unable to detect cache hierarchy for CPU 1 [ 2.145944] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 2.145964] GICv3: CPU1: using allocated LPI pending table @0x0000000002850000 [ 2.146014] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 2.147374] Detected VIPT I-cache on CPU2 [ 2.147433] cacheinfo: Unable to detect cache hierarchy for CPU 2 [ 2.147443] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 2.147459] GICv3: CPU2: using allocated LPI pending table @0x0000000002860000 [ 2.147493] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 2.148796] Detected VIPT I-cache on CPU3 [ 2.148851] cacheinfo: Unable to detect cache hierarchy for CPU 3 [ 2.148862] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 2.148878] GICv3: CPU3: using allocated LPI pending table @0x0000000002870000 [ 2.148911] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 2.149001] smp: Brought up 1 node, 4 CPUs [ 2.157755] SMP: Total of 4 processors activated. [ 2.158186] CPU features: detected: 32-bit EL0 Support [ 2.158669] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 2.159450] CPU features: detected: Common not Private translations [ 2.160021] CPU features: detected: CRC32 instructions [ 2.160488] CPU features: detected: RCpc load-acquire (LDAPR) [ 2.161014] CPU features: detected: LSE atomic instructions [ 2.161524] CPU features: detected: Privileged Access Never [ 2.162032] CPU features: detected: RAS Extension Support [ 2.162526] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 2.163219] CPU: All CPU(s) started at EL2 [ 2.163592] alternatives: applying system-wide alternatives [ 2.170123] devtmpfs: initialized [ 2.188865] Registered cp15_barrier emulation handler [ 2.189348] Registered setend emulation handler [ 2.189929] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 2.190841] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 2.191845] pinctrl core: initialized pinctrl subsystem [ 2.192572] regulator-dummy: no parameters, enabled [ 2.193355] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 2.194815] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 2.195652] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 2.196652] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 2.197423] audit: initializing netlink subsys (disabled) [ 2.198106] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1 [ 2.200230] Registered FIQ tty driver [ 2.200953] thermal_sys: Registered thermal governor 'fair_share' [ 2.200959] thermal_sys: Registered thermal governor 'step_wise' [ 2.201517] thermal_sys: Registered thermal governor 'user_space' [ 2.202123] cpuidle: using governor menu [ 2.203360] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 2.204100] ASID allocator initialised with 65536 entries [ 2.207056] ramoops: dmesg-0 0x20000@0x0000000000110000 [ 2.208695] ramoops: console 0x80000@0x0000000000130000 [ 2.209184] ramoops: pmsg 0x50000@0x00000000001b0000 [ 2.210017] printk: console [ramoops-1] enabled [ 2.210703] pstore: Registered ramoops as persistent store backend [ 2.211272] ramoops: using 0xf0000@0x110000, ecc: 0 [ 2.225896] platform fe040000.vop: Fixed dependency cycle(s) with /hdmi@fe0a0000 [ 2.244457] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 2.245585] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 2.246625] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 2.247694] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 2.248743] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 2.249487] rockchip-pinctrl pinctrl: probed pinctrl [ 2.256251] KASLR disabled due to lack of seed [ 2.265585] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 2.266221] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 2.266786] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 2.267404] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 2.267973] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 2.268590] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 2.269154] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 2.269770] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 2.270789] cryptd: max_cpu_qlen set to 1000 [ 2.273109] fiq_debugger fiq_debugger.0: error -ENXIO: IRQ fiq not found [ 2.273745] fiq_debugger fiq_debugger.0: error -ENXIO: IRQ wakeup not found [ 2.274384] fiq_debugger_probe: could not install nmi irq handler [ 2.275020] printk: console [ttyFIQ0] enabled [ 2.275806] printk: bootconsole [uart8250] disabled [ 2.276463] Registered fiq debugger ttyFIQ0 [ 2.276971] vdd_usbc: 5000 mV, enabled [ 2.277152] reg-fixed-voltage vdd-usbc: vdd_usbc supplying 5000000uV [ 2.277266] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree [ 2.277279] vcc3v3_sys: supplied by vdd_usbc [ 2.277288] vdd_usbc: could not add device link regulator.2: -ENOENT [ 2.277325] vcc3v3_sys: 3300 mV, enabled [ 2.277450] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV [ 2.277571] reg-fixed-voltage vcc3v3-sysp: Looking up vin-supply from device tree [ 2.277582] vcc3v3_sysp: supplied by vdd_usbc [ 2.277590] vdd_usbc: could not add device link regulator.3: -ENOENT [ 2.277648] vcc3v3_sysp: 3300 mV, enabled [ 2.277774] reg-fixed-voltage vcc3v3-sysp: vcc3v3_sysp supplying 3300000uV [ 2.277889] reg-fixed-voltage vcc5v0-sysp: Looking up vin-supply from device tree [ 2.277901] vcc5v0_sysp: supplied by vcc3v3_sysp [ 2.277908] vcc3v3_sysp: could not add device link regulator.4: -ENOENT [ 2.277947] vcc5v0_sysp: 5000 mV, enabled [ 2.278082] reg-fixed-voltage vcc5v0-sysp: vcc5v0_sysp supplying 5000000uV [ 2.278476] reg-fixed-voltage vcc5v0-host-regulator: Looking up vin-supply from device tree [ 2.278489] vcc5v0_host: supplied by vcc5v0_sysp [ 2.278500] vcc5v0_sysp: could not add device link regulator.5: -ENOENT [ 2.278542] vcc5v0_host: 5000 mV, enabled [ 2.278691] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 5000000uV [ 2.278947] vcc5v0_otg: 5000 mV, disabled [ 2.279051] reg-fixed-voltage vcc5v0-otg-regulator: Looking up vin-supply from device tree [ 2.279062] vcc5v0_otg: supplied by vcc5v0_sysp [ 2.279131] reg-fixed-voltage vcc5v0-otg-regulator: vcc5v0_otg supplying 5000000uV [ 2.279616] iommu: Default domain type: Translated [ 2.279634] iommu: DMA domain TLB invalidation policy: strict mode [ 2.279963] SCSI subsystem initialized [ 2.280007] libata version 3.00 loaded. [ 2.280164] usbcore: registered new interface driver usbfs [ 2.280212] usbcore: registered new interface driver hub [ 2.280254] usbcore: registered new device driver usb [ 2.280620] mc: Linux media interface: v0.10 [ 2.280665] videodev: Linux video capture interface: v2.00 [ 2.280818] pps_core: LinuxPPS API ver. 1 registered [ 2.280831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.280850] PTP clock support registered [ 2.281371] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16 [ 2.281502] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 2.281561] arm-scmi firmware:scmi: Malformed reply - real_sz:8 calc_sz:4 (loop_num_ret:3) [ 2.281574] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 2.283359] Advanced Linux Sound Architecture Driver Initialized. [ 2.283907] Bluetooth: Core ver 2.22 [ 2.283951] NET: Registered PF_BLUETOOTH protocol family [ 2.283961] Bluetooth: HCI device and connection manager initialized [ 2.283976] Bluetooth: HCI socket layer initialized [ 2.283988] Bluetooth: L2CAP socket layer initialized [ 2.284008] Bluetooth: SCO socket layer initialized [ 2.284034] NetLabel: Initializing [ 2.284043] NetLabel: domain hash size = 128 [ 2.284050] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.284110] NetLabel: unlabeled traffic allowed by default [ 2.284592] rockchip-cpuinfo cpuinfo: SoC : 35682000 [ 2.284609] rockchip-cpuinfo cpuinfo: Serial : 528d5934dd8fc0eb [ 2.823444] clocksource: Switched to clocksource arch_sys_counter [ 2.823909] VFS: Disk quotas dquot_6.6.0 [ 2.823967] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.824102] FS-Cache: Loaded [ 2.832627] NET: Registered PF_INET protocol family [ 2.832923] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 2.835258] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 2.835348] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.835410] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 2.835599] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes, linear) [ 2.837454] TCP: Hash tables configured (established 32768 bind 32768) [ 2.837678] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear) [ 2.837893] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear) [ 2.838306] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.838906] RPC: Registered named UNIX socket transport module. [ 2.838925] RPC: Registered udp transport module. [ 2.838933] RPC: Registered tcp transport module. [ 2.838940] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.839284] PCI: CLS 0 bytes, default 64 [ 2.839499] Trying to unpack rootfs image as initramfs... [ 2.842238] rockchip-thermal fe710000.tsadc: tsadc is probed successfully! [ 2.854349] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 2.856872] Initialise system trusted keyrings [ 2.857337] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 2.861452] zbud: loaded [ 2.862994] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.864107] NFS: Registering the id_resolver key type [ 2.864248] Key type id_resolver registered [ 2.864261] Key type id_legacy registered [ 2.864345] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.864369] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.864637] fuse: init (API version 7.37) [ 2.893389] Key type asymmetric registered [ 2.893481] Asymmetric key parser 'x509' registered [ 2.893600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 2.893863] io scheduler mq-deadline registered [ 2.893878] io scheduler kyber registered [ 2.894009] io scheduler bfq registered [ 2.897831] phy phy-fe8a0000.usb2-phy.0: Looking up phy-supply from device tree [ 2.897866] vcc5v0_host: could not add device link phy-fe8a0000.usb2-phy.0: -ENOENT [ 2.898035] phy phy-fe8a0000.usb2-phy.1: Looking up phy-supply from device tree [ 2.898051] vcc5v0_otg: could not add device link phy-fe8a0000.usb2-phy.1: -ENOENT [ 2.898179] phy phy-fe8a0000.usb2-phy.1: Looking up vbus-supply from device tree [ 2.898189] phy phy-fe8a0000.usb2-phy.1: Looking up vbus-supply property in node /usb2-phy@fe8a0000/otg-port failed [ 2.899731] phy phy-fe8b0000.usb2-phy.2: Looking up phy-supply from device tree [ 2.899752] phy phy-fe8b0000.usb2-phy.2: Looking up phy-supply property in node /usb2-phy@fe8b0000/host-port failed [ 2.899854] phy phy-fe8b0000.usb2-phy.3: Looking up phy-supply from device tree [ 2.899865] phy phy-fe8b0000.usb2-phy.3: Looking up phy-supply property in node /usb2-phy@fe8b0000/otg-port failed [ 2.899932] phy phy-fe8b0000.usb2-phy.3: Looking up vbus-supply from device tree [ 2.899940] phy phy-fe8b0000.usb2-phy.3: Looking up vbus-supply property in node /usb2-phy@fe8b0000/otg-port failed [ 2.902196] phy phy-fe830000.phy.4: Looking up phy-supply from device tree [ 2.902218] phy phy-fe830000.phy.4: Looking up phy-supply property in node /phy@fe830000 failed [ 2.902687] phy phy-fe840000.phy.5: Looking up phy-supply from device tree [ 2.902700] phy phy-fe840000.phy.5: Looking up phy-supply property in node /phy@fe840000 failed [ 2.903395] phy phy-fe820000.phy.6: Looking up phy-supply from device tree [ 2.903411] phy phy-fe820000.phy.6: Looking up phy-supply property in node /phy@fe820000 failed [ 2.905108] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap [ 2.905175] phy phy-fe8c0000.phy.7: Looking up phy-supply from device tree [ 2.905185] phy phy-fe8c0000.phy.7: Looking up phy-supply property in node /phy@fe8c0000 failed [ 2.907436] rk-pcie 3c0000000.pcie: invalid prsnt-gpios property in node [ 2.907547] rk-pcie 3c0000000.pcie: Looking up vpcie3v3-supply from device tree [ 2.907562] rk-pcie 3c0000000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe260000 failed [ 2.907587] rk-pcie 3c0000000.pcie: no vpcie3v3 regulator found [ 2.907841] rk-pcie 3c0400000.pcie: invalid prsnt-gpios property in node [ 2.908159] rk-pcie 3c0800000.pcie: invalid prsnt-gpios property in node [ 2.908181] rk-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges: [ 2.908184] rk-pcie 3c0800000.pcie: Looking up vpcie3v3-supply from device tree [ 2.908196] rk-pcie 3c0800000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe280000 failed [ 2.908223] rk-pcie 3c0800000.pcie: no vpcie3v3 regulator found [ 2.908223] rk-pcie 3c0000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 [ 2.908263] rk-pcie 3c0000000.pcie: MEM 0x00f4200000..0x00f5ffffff -> 0x00f4200000 [ 2.908283] rk-pcie 3c0000000.pcie: MEM 0x0300000000..0x033fffffff -> 0x0300000000 [ 2.908349] rk-pcie 3c0000000.pcie: iATU unroll: enabled [ 2.908362] rk-pcie 3c0000000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G [ 2.908759] iep: Module initialized. [ 2.908843] mpp_service mpp-srv: 84e76edccca5 author: jensen 2023-07-31 Merge remote-tracking branch 'rk/develop-6.1' [ 2.908858] mpp_service mpp-srv: probe start [ 2.912269] mpp_service mpp-srv: probe success [ 2.917088] snps pcie3phy FW update! size 8192 [ 2.917111] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.917144] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.918910] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.918941] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.919361] rockchip-pvtm fde00000.pvtm: pvtm@0 probed [ 2.919515] rockchip-pvtm fde80000.pvtm: pvtm@1 probed [ 2.919638] rockchip-pvtm fde90000.pvtm: pvtm@2 probed [ 2.920265] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 2.920986] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 2.921278] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 2.923790] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up npu-supply from device tree [ 2.923818] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up npu-supply property in node /power-management@fdd90000/power-controller failed [ 2.924829] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up vpu-supply from device tree [ 2.924855] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up vpu-supply property in node /power-management@fdd90000/power-controller failed [ 2.925362] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up rga-supply from device tree [ 2.925383] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up rga-supply property in node /power-management@fdd90000/power-controller failed [ 2.926930] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up rkvenc-supply from device tree [ 2.926958] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up rkvenc-supply property in node /power-management@fdd90000/power-controller failed [ 2.927469] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up rkvdec-supply from device tree [ 2.927491] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up rkvdec-supply property in node /power-management@fdd90000/power-controller failed [ 2.928946] rockchip-vop2 fe040000.vop: Adding to iommu group 7 [ 2.930455] random: crng init done [ 2.930661] rk-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges: [ 2.930911] rk-pcie 3c0800000.pcie: IO 0x00f0100000..0x00f01fffff -> 0x00f0100000 [ 2.930938] rk-pcie 3c0800000.pcie: MEM 0x00f0200000..0x00f1ffffff -> 0x00f0200000 [ 2.930955] rk-pcie 3c0800000.pcie: MEM 0x0380000000..0x03bfffffff -> 0x0380000000 [ 2.931025] rk-pcie 3c0800000.pcie: iATU unroll: enabled [ 2.931036] rk-pcie 3c0800000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G [ 2.935950] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0xf, primary plane phy id: 2 [ 2.936012] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x30, primary plane phy id: 4 [ 2.936029] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1 [ 2.936149] rockchip-vop2 fe040000.vop: [drm:vop2_bind] Esmart1-win0 as cursor plane for vp0 [ 2.936762] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffff80000925a060) [ 2.936944] dwhdmi-rockchip fe0a0000.hdmi: Looking up avdd-0v9-supply from device tree [ 2.936961] dwhdmi-rockchip fe0a0000.hdmi: Looking up avdd-0v9-supply property in node /hdmi@fe0a0000 failed [ 2.936991] dwhdmi-rockchip fe0a0000.hdmi: Looking up avdd-1v8-supply from device tree [ 2.937000] dwhdmi-rockchip fe0a0000.hdmi: Looking up avdd-1v8-supply property in node /hdmi@fe0a0000 failed [ 2.937189] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.937855] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.938104] dwhdmi-rockchip fe0a0000.hdmi: error -ENXIO: IRQ index 1 not found [ 2.938488] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffff80000926c9c0) [ 2.939080] rockchip-drm display-subsystem: route-hdmi: failed to get logo,offset [ 2.939107] rockchip-drm display-subsystem: can't not find any logo display [ 2.939121] rockchip-drm display-subsystem: failed to show kernel logo [ 2.939872] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0 [ 2.940018] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 2.940532] no ATF memory for init [ 2.942864] SPI driver panel-simple-spi has no spi_device_id for simple-panel-spi [ 2.944847] input: hdmi_cec_key as /devices/platform/fe0a0000.hdmi/dw-hdmi-cec.1.auto/input/input0 [ 2.945865] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 2.949615] brd: module loaded [ 2.954458] loop: module loaded [ 2.954728] lkdtm: No crash points registered, enable through debugfs [ 2.956549] SPI driver spidev has no spi_device_id for rockchip,spidev [ 2.958950] PPP generic driver version 2.4.2 [ 2.959216] usbcore: registered new interface driver asix [ 2.959286] usbcore: registered new interface driver ax88179_178a [ 2.959331] usbcore: registered new interface driver cdc_ether [ 2.959368] usbcore: registered new interface driver rndis_host [ 2.959416] usbcore: registered new interface driver qmi_wwan [ 2.969479] phy phy-fe8b0000.usb2-phy.3: illegal mode [ 2.970594] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 2.970652] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [ 2.970781] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010 [ 2.970847] xhci-hcd xhci-hcd.4.auto: irq 47, io mem 0xfd000000 [ 2.971017] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 2.971039] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2 [ 2.971057] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed [ 2.971127] ehci-platform fd880000.usb: EHCI Host Controller [ 2.971146] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [ 2.971234] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.971251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.971262] usb usb1: Product: xHCI Host Controller [ 2.971271] usb usb1: Manufacturer: Linux 6.1.25 xhci-hcd [ 2.971279] usb usb1: SerialNumber: xhci-hcd.4.auto [ 2.971566] ehci-platform fd800000.usb: EHCI Host Controller [ 2.971579] phy phy-fe8b0000.usb2-phy.3: illegal mode [ 2.971598] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 2.971838] hub 1-0:1.0: USB hub found [ 2.971881] hub 1-0:1.0: 1 port detected [ 2.972252] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.972367] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 2.972382] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.972393] usb usb2: Product: xHCI Host Controller [ 2.972402] usb usb2: Manufacturer: Linux 6.1.25 xhci-hcd [ 2.972410] usb usb2: SerialNumber: xhci-hcd.4.auto [ 2.972796] hub 2-0:1.0: USB hub found [ 2.972835] hub 2-0:1.0: 1 port detected [ 2.973169] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 3 [ 2.973202] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 5 [ 2.973218] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 6 [ 2.973359] ehci-platform fd800000.usb: irq 48, io mem 0xfd800000 [ 2.973377] ehci-platform fd880000.usb: irq 49, io mem 0xfd880000 [ 2.973394] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 [ 2.973395] ohci-platform fd840000.usb: irq 50, io mem 0xfd840000 [ 2.973538] ohci-platform fd8c0000.usb: irq 51, io mem 0xfd8c0000 [ 2.973556] usbcore: registered new interface driver cdc_acm [ 2.973570] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.973619] usbcore: registered new interface driver cdc_wdm [ 2.973882] usbcore: registered new interface driver uas [ 2.973949] usbcore: registered new interface driver usb-storage [ 2.974038] usbcore: registered new interface driver usbserial_generic [ 2.974066] usbserial: USB Serial support registered for generic [ 2.974112] usbcore: registered new interface driver ch341 [ 2.974136] usbserial: USB Serial support registered for ch341-uart [ 2.974173] usbcore: registered new interface driver cp210x [ 2.974197] usbserial: USB Serial support registered for cp210x [ 2.974238] usbcore: registered new interface driver ftdi_sio [ 2.974268] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.974338] usbcore: registered new interface driver option [ 2.974364] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.974446] usbcore: registered new interface driver pl2303 [ 2.974475] usbserial: USB Serial support registered for pl2303 [ 2.974516] usbcore: registered new interface driver qcserial [ 2.974541] usbserial: USB Serial support registered for Qualcomm USB modem [ 2.975026] mousedev: PS/2 mouse device common for all mice [ 2.976237] i2c_dev: i2c /dev entries driver [ 2.977829] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected! [ 2.977874] fan53555-regulator 0-001c: Looking up vin-supply from device tree [ 2.978121] vdd_cpu: supplied by vcc3v3_sys [ 2.978134] vcc3v3_sys: could not add device link regulator.7: -ENOENT [ 2.978315] vdd_cpu: override max_uV, 1390000 -> 1387500 [ 2.979075] vdd_cpu: 712 <--> 1387 mV at 1025 mV, enabled [ 2.981158] rk808 0-0020: chip id: 0x8090 [ 2.981219] rk808 0-0020: No cache defaults, reading back from HW [ 2.987410] rk808 0-0020: source: on=0x40, off=0x00 [ 2.987454] rk808 0-0020: support dcdc3 fb mode:-22, 1 [ 2.987467] rk808 0-0020: support pmic reset mode:0,0 [ 2.990726] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.990770] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.990838] rk808 0-0020: Looking up vcc1-supply from device tree [ 2.990856] vdd_logic: supplied by vcc3v3_sys [ 2.990865] vcc3v3_sys: could not add device link regulator.8: -ENOENT [ 2.991085] vdd_logic: 500 <--> 1350 mV at 900 mV, enabled [ 2.991366] rk808 0-0020: Looking up vcc2-supply from device tree [ 2.991381] vdd_gpu: supplied by vcc3v3_sys [ 2.991390] vcc3v3_sys: could not add device link regulator.9: -ENOENT [ 2.991542] vdd_gpu: 500 <--> 1350 mV at 900 mV, enabled [ 2.991764] rk808 0-0020: Looking up vcc3-supply from device tree [ 2.991777] vcc_ddr: supplied by vcc3v3_sys [ 2.991784] vcc3v3_sys: could not add device link regulator.10: -ENOENT [ 2.991934] vcc_ddr: at 500 mV, enabled [ 2.992146] rk808 0-0020: Looking up vcc4-supply from device tree [ 2.992160] vdd_npu: supplied by vcc3v3_sys [ 2.992167] vcc3v3_sys: could not add device link regulator.11: -ENOENT [ 2.992321] vdd_npu: 500 <--> 1350 mV at 900 mV, enabled [ 2.992539] rk808 0-0020: Looking up vcc9-supply from device tree [ 2.992553] vcc_1v8: supplied by vcc3v3_sys [ 2.992561] vcc3v3_sys: could not add device link regulator.12: -ENOENT [ 2.992706] vcc_1v8: 1800 mV, enabled [ 2.992921] rk808 0-0020: Looking up vcc5-supply from device tree [ 2.992933] vdda0v9_image: supplied by vcc3v3_sys [ 2.992941] vcc3v3_sys: could not add device link regulator.13: -ENOENT [ 2.993499] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 2.993670] vdda0v9_image: 900 mV, enabled [ 2.993768] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.993787] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.993798] usb usb5: Product: EHCI Host Controller [ 2.993807] usb usb5: Manufacturer: Linux 6.1.25 ehci_hcd [ 2.993816] usb usb5: SerialNumber: fd800000.usb [ 2.994209] rk808 0-0020: Looking up vcc5-supply from device tree [ 2.994231] vdda_0v9: supplied by vcc3v3_sys [ 2.994239] vcc3v3_sys: could not add device link regulator.14: -ENOENT [ 2.994326] hub 5-0:1.0: USB hub found [ 2.994382] hub 5-0:1.0: 1 port detected [ 2.994959] vdda_0v9: 900 mV, enabled [ 2.995209] rk808 0-0020: Looking up vcc5-supply from device tree [ 2.995227] vdda0v9_pmu: supplied by vcc3v3_sys [ 2.995236] vcc3v3_sys: could not add device link regulator.15: -ENOENT [ 2.995937] vdda0v9_pmu: 900 mV, enabled [ 2.996163] rk808 0-0020: Looking up vcc6-supply from device tree [ 2.996177] vccio_acodec: supplied by vcc3v3_sys [ 2.996185] vcc3v3_sys: could not add device link regulator.16: -ENOENT [ 2.996847] vccio_acodec: 3300 mV, enabled [ 2.997077] rk808 0-0020: Looking up vcc6-supply from device tree [ 2.997091] vccio_sd: supplied by vcc3v3_sys [ 2.997099] vcc3v3_sys: could not add device link regulator.17: -ENOENT [ 2.997759] vccio_sd: 1800 <--> 3300 mV at 3300 mV, enabled [ 2.997986] rk808 0-0020: Looking up vcc6-supply from device tree [ 2.997998] vcc3v3_pmu: supplied by vcc3v3_sys [ 2.998006] vcc3v3_sys: could not add device link regulator.18: -ENOENT [ 2.998667] vcc3v3_pmu: 3300 mV, enabled [ 2.998905] rk808 0-0020: Looking up vcc7-supply from device tree [ 2.998919] vcca_1v8: supplied by vcc3v3_sys [ 2.998926] vcc3v3_sys: could not add device link regulator.19: -ENOENT [ 2.999586] vcca_1v8: 1800 mV, enabled [ 2.999817] rk808 0-0020: Looking up vcc7-supply from device tree [ 2.999830] vcca1v8_pmu: supplied by vcc3v3_sys [ 2.999837] vcc3v3_sys: could not add device link regulator.20: -ENOENT [ 3.000498] vcca1v8_pmu: 1800 mV, enabled [ 3.000712] rk808 0-0020: Looking up vcc7-supply from device tree [ 3.000725] vcca1v8_image: supplied by vcc3v3_sys [ 3.000732] vcc3v3_sys: could not add device link regulator.21: -ENOENT [ 3.001403] vcca1v8_image: 1800 mV, enabled [ 3.001631] rk808 0-0020: Looking up vcc9-supply from device tree [ 3.001644] vcc_3v3: supplied by vcc3v3_sys [ 3.001651] vcc3v3_sys: could not add device link regulator.22: -ENOENT [ 3.001814] vcc_3v3: at 3300 mV, enabled [ 3.002013] rk808 0-0020: Looking up vcc8-supply from device tree [ 3.002025] vcc3v3_sd: supplied by vcc3v3_sys [ 3.002032] vcc3v3_sys: could not add device link regulator.23: -ENOENT [ 3.002177] vcc3v3_sd: at 3300 mV, enabled [ 3.002385] rk817-battery: Failed to locate of_node [id: -1] [ 3.002602] rk817-charger: Failed to locate of_node [id: -1] [ 3.003875] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input1 [ 3.008184] rtc-hym8563 5-0051: rtc information is valid [ 3.010874] rtc-hym8563 5-0051: registered as rtc0 [ 3.011223] rtc-hym8563 5-0051: setting system clock to 2024-04-20T03:30:53 UTC (1713583853) [ 3.011764] IR NEC protocol handler initialized [ 3.014952] __power_supply_register: Expected proper parent device for 'test_ac' [ 3.015243] __power_supply_register: Expected proper parent device for 'test_battery' [ 3.015585] __power_supply_register: Expected proper parent device for 'test_usb' [ 3.017360] device-mapper: uevent: version 1.0.3 [ 3.017621] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 3.018276] cpu cpu0: leakage=30 [ 3.018364] cpu cpu0: pvtm = 88870, from nvmem [ 3.018382] cpu cpu0: pvtm-volt-sel=2 [ 3.018433] cpu cpu0: Looking up cpu-supply from device tree [ 3.020100] cpu cpu0: avs=0 [ 3.020311] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=1800000000 h_limit=0 h_table=0 [ 3.021545] cpu cpu0: EM: OPP:816000 is inefficient [ 3.021559] cpu cpu0: EM: OPP:600000 is inefficient [ 3.021794] cpu cpu0: EM: created perf domain [ 3.023515] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [ 3.023540] rk-pcie 3c0400000.pcie: Looking up vpcie3v3-supply from device tree [ 3.023576] rk-pcie 3c0400000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe270000 failed [ 3.023639] rk-pcie 3c0400000.pcie: no vpcie3v3 regulator found [ 3.023817] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.023838] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.023852] usb usb3: Product: EHCI Host Controller [ 3.023864] usb usb3: Manufacturer: Linux 6.1.25 ehci_hcd [ 3.023875] usb usb3: SerialNumber: fd880000.usb [ 3.024478] hub 3-0:1.0: USB hub found [ 3.024610] hub 3-0:1.0: 1 port detected [ 3.025002] sdhci: Secure Digital Host Controller Interface driver [ 3.025019] sdhci: Copyright(c) Pierre Ossman [ 3.025029] Synopsys Designware Multimedia Card Interface Driver [ 3.025683] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.026521] dwmmc_rockchip fe2b0000.mmc: No normal pinctrl state [ 3.026549] dwmmc_rockchip fe2b0000.mmc: No idle pinctrl state [ 3.027070] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 3.027150] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 3.027169] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 3.027233] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 82,32 bit host data width,256 deep fifo [ 3.027367] dwmmc_rockchip fe2b0000.mmc: Looking up vmmc-supply from device tree [ 3.027538] dwmmc_rockchip fe2b0000.mmc: Looking up vqmmc-supply from device tree [ 3.027854] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply from device tree [ 3.027868] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply property in node /mmc@fe310000 failed [ 3.027919] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply from device tree [ 3.027928] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply property in node /mmc@fe310000 failed [ 3.037471] ledtrig-cpu: registered to indicate activity on CPUs [ 3.037569] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 3.037686] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 3.037771] hid: raw HID events driver (C) Jiri Kosina [ 3.038192] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 3.038253] usbcore: registered new interface driver usbhid [ 3.038269] usbhid: USB HID core driver [ 3.038601] rockchip,bus bus-npu: Looking up bus-supply from device tree [ 3.038633] rk-pcie 3c0400000.pcie: host bridge /pcie@fe270000 ranges: [ 3.038680] rk-pcie 3c0400000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000 [ 3.038710] rk-pcie 3c0400000.pcie: MEM 0x00f2200000..0x00f3ffffff -> 0x00f2200000 [ 3.038730] rk-pcie 3c0400000.pcie: MEM 0x0340000000..0x037fffffff -> 0x0340000000 [ 3.038820] rockchip,bus bus-npu: Failed to get leakage [ 3.038831] rk-pcie 3c0400000.pcie: iATU unroll: enabled [ 3.038838] rk-pcie 3c0400000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G [ 3.038899] rockchip,bus bus-npu: pvtm = 88870, from nvmem [ 3.038922] rockchip,bus bus-npu: pvtm-volt-sel=1 [ 3.038975] rockchip,bus bus-npu: Looking up pvtm-supply from device tree [ 3.039741] rockchip,bus bus-npu: avs=0 [ 3.043315] rockchip-saradc fe720000.saradc: Looking up vref-supply from device tree [ 3.044959] optee: probing for conduit method. [ 3.045014] optee: revision 3.13 (4167319d) [ 3.045444] optee: initialized driver [ 3.047895] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.047932] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.047945] usb usb4: Product: Generic Platform OHCI controller [ 3.047956] usb usb4: Manufacturer: Linux 6.1.25 ohci_hcd [ 3.047967] usb usb4: SerialNumber: fd8c0000.usb [ 3.048561] hub 4-0:1.0: USB hub found [ 3.048623] hub 4-0:1.0: 1 port detected [ 3.049192] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.049241] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.049255] usb usb6: Product: Generic Platform OHCI controller [ 3.049266] usb usb6: Manufacturer: Linux 6.1.25 ohci_hcd [ 3.049277] usb usb6: SerialNumber: fd840000.usb [ 3.049957] hub 6-0:1.0: USB hub found [ 3.050018] hub 6-0:1.0: 1 port detected [ 3.052819] Initializing XFRM netlink socket [ 3.052867] IPsec XFRM device driver [ 3.054134] NET: Registered PF_INET6 protocol family [ 3.055461] Segment Routing with IPv6 [ 3.055512] In-situ OAM (IOAM) with IPv6 [ 3.066277] mmc2: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA [ 3.080387] Freeing initrd memory: 7880K [ 3.081235] bpfilter: Loaded bpfilter_umh pid 103 [ 3.081999] NET: Registered PF_PACKET protocol family [ 3.082216] Bluetooth: RFCOMM TTY layer initialized [ 3.082249] Bluetooth: RFCOMM socket layer initialized [ 3.082280] Bluetooth: RFCOMM ver 1.11 [ 3.082299] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.082316] Bluetooth: HIDP socket layer initialized [ 3.083141] rfkill_gpio m2-wlan-radio: m2-wlan-radio device registered. [ 3.083304] [BT_RFKILL]: Enter rfkill_rk_init [ 3.083319] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 3.084293] phy phy-fe8a0000.usb2-phy.1: illegal mode [ 3.084797] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 3.084834] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 7 [ 3.084912] Key type dns_resolver registered [ 3.084959] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000202002010010 [ 3.085029] xhci-hcd xhci-hcd.6.auto: irq 87, io mem 0xfcc00000 [ 3.085203] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller [ 3.085228] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 8 [ 3.085246] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0 SuperSpeed [ 3.085412] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.085429] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.085440] usb usb7: Product: xHCI Host Controller [ 3.085449] usb usb7: Manufacturer: Linux 6.1.25 xhci-hcd [ 3.085458] usb usb7: SerialNumber: xhci-hcd.6.auto [ 3.086046] hub 7-0:1.0: USB hub found [ 3.086095] hub 7-0:1.0: 1 port detected [ 3.086457] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.086586] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 3.086602] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.086612] usb usb8: Product: xHCI Host Controller [ 3.086621] usb usb8: Manufacturer: Linux 6.1.25 xhci-hcd [ 3.086630] usb usb8: SerialNumber: xhci-hcd.6.auto [ 3.086802] registered taskstats version 1 [ 3.086839] Loading compiled-in X.509 certificates [ 3.087133] hub 8-0:1.0: USB hub found [ 3.087176] hub 8-0:1.0: 1 port detected [ 3.087435] zswap: loaded using pool lzo/zbud [ 3.088298] pstore: Using crash dump compression: deflate [ 3.090319] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) [ 3.090934] dwmmc_rockchip fe2b0000.mmc: All phases bad! [ 3.090949] mmc0: tuning execution failed: -5 [ 3.101899] rga: rga2, irq = 88, match scheduler [ 3.102257] rga: rga2 hardware loaded successfully, hw_version:3.2.63318. [ 3.102322] rga: rga2 probe successfully [ 3.102625] rga_iommu: IOMMU binding successfully, default mapping core[0x4] [ 3.102851] rga: Module initialized. v1.2.27 [ 3.106314] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 3.130024] friendlyelec-board board: Serial : 528d5934dd8fc0eb [ 3.130442] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree [ 3.130457] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply property in node /syscon@fdc20000/io-domains failed [ 3.130497] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree [ 3.130666] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu [ 3.130686] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree [ 3.130794] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) supplied by vccio_acodec [ 3.130810] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree [ 3.130817] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply property in node /syscon@fdc20000/io-domains failed [ 3.130842] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree [ 3.130953] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd [ 3.130968] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree [ 3.131107] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8 [ 3.131122] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree [ 3.131235] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3 [ 3.131250] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree [ 3.131318] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8 [ 3.131333] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree [ 3.131391] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3 [ 3.131726] mpp_rkvenc fdf40000.rkvenc: Adding to iommu group 5 [ 3.131936] mpp_rkvenc fdf40000.rkvenc: probing start [ 3.132223] mpp_rkvenc fdf40000.rkvenc: Looking up venc-supply from device tree [ 3.132357] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage [ 3.132414] mpp_rkvenc fdf40000.rkvenc: pvtm = 88870, from nvmem [ 3.132431] mpp_rkvenc fdf40000.rkvenc: pvtm-volt-sel=1 [ 3.132476] mpp_rkvenc fdf40000.rkvenc: Looking up venc-supply from device tree [ 3.132495] vdd_logic: could not add device link fdf40000.rkvenc: -EEXIST [ 3.132503] vdd_logic: Failed to create debugfs directory [ 3.132732] mpp_rkvenc fdf40000.rkvenc: avs=0 [ 3.133192] mpp_rkvenc fdf40000.rkvenc: using default check_rate_volt [ 3.133217] mpp_rkvenc fdf40000.rkvenc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0 [ 3.134001] mpp_rkvenc fdf40000.rkvenc: probing finish [ 3.134451] mpp_vdpu2 fdea0400.vdpu: Adding to iommu group 1 [ 3.134622] mpp_vdpu2 fdea0400.vdpu: probe device [ 3.134624] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x3 [ 3.135143] mpp_vdpu2 fdea0400.vdpu: probing finish [ 3.135460] mpp_vepu2 fdee0000.vepu: Adding to iommu group 3 [ 3.135646] mpp_vepu2 fdee0000.vepu: probing start [ 3.136196] mpp_vepu2 fdee0000.vepu: probing finish [ 3.136513] mpp-iep2 fdef0000.iep: Adding to iommu group 4 [ 3.136650] mpp-iep2 fdef0000.iep: probe device [ 3.136910] mpp-iep2 fdef0000.iep: allocate roi buffer failed [ 3.137203] mpp-iep2 fdef0000.iep: probing finish [ 3.137525] mpp_jpgdec fded0000.jpegd: Adding to iommu group 2 [ 3.137704] mpp_jpgdec fded0000.jpegd: probe device [ 3.138253] mpp_jpgdec fded0000.jpegd: probing finish [ 3.138680] mpp_rkvdec2 fdf80200.rkvdec: Adding to iommu group 6 [ 3.138962] mpp_rkvdec2 fdf80200.rkvdec: rkvdec, probing start [ 3.139289] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found! [ 3.139303] rkvdec2_init:982: No niu aclk reset resource define [ 3.139315] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found! [ 3.139324] rkvdec2_init:985: No niu hclk reset resource define [ 3.139352] mpp_rkvdec2 fdf80200.rkvdec: Looking up vdec-supply from device tree [ 3.139621] mpp_rkvdec2 fdf80200.rkvdec: leakage=61 [ 3.139640] mpp_rkvdec2 fdf80200.rkvdec: leakage-volt-sel=0 [ 3.139679] mpp_rkvdec2 fdf80200.rkvdec: pvtm = 88870, from nvmem [ 3.139694] mpp_rkvdec2 fdf80200.rkvdec: pvtm-volt-sel=1 [ 3.139744] mpp_rkvdec2 fdf80200.rkvdec: Looking up vdec-supply from device tree [ 3.139766] vdd_logic: could not add device link fdf80200.rkvdec: -EEXIST [ 3.139774] vdd_logic: Failed to create debugfs directory [ 3.140005] mpp_rkvdec2 fdf80200.rkvdec: avs=0 [ 3.140450] mpp_rkvdec2 fdf80200.rkvdec: using default check_rate_volt [ 3.140476] mpp_rkvdec2 fdf80200.rkvdec: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0 [ 3.140777] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000 [ 3.140792] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000 [ 3.140801] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056 [ 3.140810] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536 [ 3.140820] mpp_rkvdec2 fdf80200.rkvdec: min_width 512 [ 3.140884] mpp_rkvdec2 fdf80200.rkvdec: link mode probe finish [ 3.140962] mpp_rkvdec2 fdf80200.rkvdec: probing finish [ 3.141850] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up gpu-supply from device tree [ 3.141876] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fdd90000/power-controller failed [ 3.142010] mali fde60000.gpu: Kernel DDK version g18p0-01eac0 [ 3.142246] mali fde60000.gpu: Looking up mali-supply from device tree [ 3.142390] mali fde60000.gpu: Looking up mem-supply from device tree [ 3.142404] mali fde60000.gpu: Looking up mem-supply property in node /gpu@fde60000 failed [ 3.142573] mali fde60000.gpu: leakage=9 [ 3.142622] mali fde60000.gpu: pvtm = 88870, from nvmem [ 3.142642] mali fde60000.gpu: pvtm-volt-sel=2 [ 3.142701] mali fde60000.gpu: Looking up mali-supply from device tree [ 3.142726] vdd_gpu: could not add device link fde60000.gpu: -EEXIST [ 3.142734] vdd_gpu: Failed to create debugfs directory [ 3.143694] mali fde60000.gpu: avs=0 [ 3.143745] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 144; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available. [ 3.144333] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0 [ 3.144443] mali fde60000.gpu: No priority control manager is configured [ 3.144784] mali fde60000.gpu: No memory group manager is configured [ 3.146170] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up vi-supply from device tree [ 3.146205] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up vi-supply property in node /power-management@fdd90000/power-controller failed [ 3.146283] mali fde60000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 [ 3.147140] mali fde60000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model' [ 3.147177] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0] [ 3.147207] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.147278] mmc0: new high speed SDXC card at address 59b4 [ 3.147457] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0] [ 3.147723] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0] [ 3.148029] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = '' [ 3.148384] mmcblk0: mmc0:59b4 SD128 119 GiB [ 3.149326] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.151652] mali fde60000.gpu: Using configured power model mali-g52_r1-power-model, and fallback mali-simple-power-model [ 3.152354] mmcblk0: p1 [ 3.152919] mali fde60000.gpu: Probed as mali0 [ 3.153632] rk808-rtc rk808-rtc: registered as rtc1 [ 3.154453] RKNPU fde40000.npu: Adding to iommu group 0 [ 3.154911] RKNPU fde40000.npu: RKNPU: rknpu iommu is enabled, using iommu mode [ 3.154967] RKNPU fde40000.npu: Looking up rknpu-supply from device tree [ 3.155124] RKNPU fde40000.npu: Looking up mem-supply from device tree [ 3.155135] RKNPU fde40000.npu: Looking up mem-supply property in node /npu@fde40000 failed [ 3.155185] RKNPU fde40000.npu: can't request region for resource [mem 0xfde40000-0xfde4ffff] [ 3.155585] [drm] Initialized rknpu 0.9.2 20231018 for fde40000.npu on minor 1 [ 3.156013] RKNPU fde40000.npu: leakage=5 [ 3.156059] RKNPU fde40000.npu: pvtm = 88870, from nvmem [ 3.156079] RKNPU fde40000.npu: pvtm-volt-sel=2 [ 3.156152] RKNPU fde40000.npu: failed to set opp config [ 3.156165] RKNPU fde40000.npu: failed to init opp info [ 3.156173] RKNPU fde40000.npu: RKNPU: failed to init_opp_table [ 3.157630] rockchip-pm rockchip-suspend: not set pwm-regulator-config [ 3.157663] rockchip-suspend not set sleep-mode-config for mem-lite [ 3.157672] rockchip-suspend not set wakeup-config for mem-lite [ 3.157682] rockchip-suspend not set sleep-mode-config for mem-ultra [ 3.157690] rockchip-suspend not set wakeup-config for mem-ultra [ 3.158301] ALSA device list: [ 3.158314] #0: rockchip,hdmi0 [ 3.164511] mmc2: Host Software Queue enabled [ 3.164673] mmc2: new HS200 MMC card at address 0001 [ 3.165883] Freeing unused kernel memory: 7360K [ 3.166367] mmcblk2: mmc2:0001 A3A551 28.9 GiB [ 3.169296] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 [ 3.170452] mmcblk2boot0: mmc2:0001 A3A551 4.00 MiB [ 3.171514] mmcblk2boot1: mmc2:0001 A3A551 4.00 MiB [ 3.172413] mmcblk2rpmb: mmc2:0001 A3A551 16.0 MiB, chardev (236:0) [ 3.213913] rk-pcie 3c0800000.pcie: PCIe Link up, LTSSM is 0x130011 [ 3.213948] rk-pcie 3c0800000.pcie: PCIe Gen.2 x1 link up [ 3.214093] rk-pcie 3c0800000.pcie: PCI host bridge to bus 0002:20 [ 3.214107] pci_bus 0002:20: root bus resource [bus 20-2f] [ 3.214120] pci_bus 0002:20: root bus resource [io 0x100000-0x1fffff] (bus address [0xf0100000-0xf01fffff]) [ 3.214130] pci_bus 0002:20: root bus resource [mem 0xf0200000-0xf1ffffff] [ 3.214138] pci_bus 0002:20: root bus resource [mem 0x380000000-0x3bfffffff pref] [ 3.214171] pci 0002:20:00.0: [1d87:3566] type 01 class 0x060400 [ 3.214190] pci 0002:20:00.0: reg 0x10: [mem 0x00000000-0x3fffffff] [ 3.214203] pci 0002:20:00.0: reg 0x14: [mem 0x00000000-0x3fffffff] [ 3.214215] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 3.214274] pci 0002:20:00.0: supports D1 D2 [ 3.214283] pci 0002:20:00.0: PME# supported from D0 D1 D3hot [ 3.220896] vendor storage:20190527 ret = 0 [ 3.222800] pci 0002:20:00.0: Primary bus is hard wired to 0 [ 3.222830] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [ 3.223037] pci 0002:21:00.0: [10ec:8125] type 00 class 0x020000 [ 3.223106] pci 0002:21:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.223179] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.223230] pci 0002:21:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 3.223665] pci 0002:21:00.0: supports D1 D2 [ 3.223676] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.233680] Run /init as init process [ 3.233697] with arguments: [ 3.233701] /init [ 3.233704] with environment: [ 3.233707] HOME=/ [ 3.233710] TERM=linux [ 3.233713] storagemedia=emmc [ 3.233716] data=/dev/mmcblk2p9 [ 3.233719] cgroup_enable=memory [ 3.233722] cgroup_memory=1 [ 3.253501] rk-pcie 3c0000000.pcie: PCIe Link up, LTSSM is 0x130011 [ 3.253554] rk-pcie 3c0000000.pcie: PCIe Gen.2 x1 link up [ 3.253719] rk-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00 [ 3.253737] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.253749] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff]) [ 3.253758] pci_bus 0000:00: root bus resource [mem 0xf4200000-0xf5ffffff] [ 3.253767] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33fffffff pref] [ 3.263659] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21 [ 3.263697] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400 [ 3.263738] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 3.263740] pci 0002:20:00.0: BAR 0: no space for [mem size 0x40000000] [ 3.263746] pci 0002:20:00.0: BAR 0: failed to assign [mem size 0x40000000] [ 3.263752] pci 0002:20:00.0: BAR 1: no space for [mem size 0x40000000] [ 3.263757] pci 0002:20:00.0: BAR 1: failed to assign [mem size 0x40000000] [ 3.263762] pci 0002:20:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff] [ 3.263776] pci 0002:20:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref] [ 3.263788] pci 0002:20:00.0: BAR 7: assigned [io 0x100000-0x100fff] [ 3.263803] pci 0002:21:00.0: BAR 2: assigned [mem 0xf0200000-0xf020ffff 64bit] [ 3.263836] pci 0000:00:00.0: supports D1 D2 [ 3.263846] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.263849] pci 0002:21:00.0: BAR 4: assigned [mem 0xf0210000-0xf0213fff 64bit] [ 3.263889] pci 0002:21:00.0: BAR 0: assigned [io 0x100000-0x1000ff] [ 3.263909] pci 0002:20:00.0: PCI bridge to [bus 21] [ 3.263920] pci 0002:20:00.0: bridge window [io 0x100000-0x100fff] [ 3.263931] pci 0002:20:00.0: bridge window [mem 0xf0200000-0xf02fffff] [ 3.270422] pcieport 0002:20:00.0: PME: Signaling with IRQ 107 [ 3.272520] rk-pcie 3c0800000.pcie: missing "busno" property [ 3.275552] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) [ 3.275654] pci 0000:01:00.0: [1ac1:089a] type 00 class 0x0000ff [ 3.275735] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit pref] [ 3.275786] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x000fffff 64bit pref] [ 3.303761] pci 0000:00:00.0: BAR 9: assigned [mem 0x300000000-0x3001fffff 64bit pref] [ 3.303807] pci 0000:00:00.0: BAR 6: assigned [mem 0xf4200000-0xf420ffff pref] [ 3.303823] pci 0000:01:00.0: BAR 2: assigned [mem 0x300000000-0x3000fffff 64bit pref] [ 3.303867] pci 0000:01:00.0: BAR 0: assigned [mem 0x300100000-0x300103fff 64bit pref] [ 3.303910] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.303922] pci 0000:00:00.0: bridge window [mem 0x300000000-0x3001fffff 64bit pref] [ 3.306755] pcieport 0000:00:00.0: PME: Signaling with IRQ 109 [ 3.323562] rk-pcie 3c0400000.pcie: PCIe Link up, LTSSM is 0x130011 [ 3.323616] rk-pcie 3c0400000.pcie: PCIe Gen.2 x1 link up [ 3.323833] rk-pcie 3c0400000.pcie: PCI host bridge to bus 0001:10 [ 3.323853] pci_bus 0001:10: root bus resource [bus 10-1f] [ 3.323866] pci_bus 0001:10: root bus resource [io 0x200000-0x2fffff] (bus address [0xf2100000-0xf21fffff]) [ 3.323876] pci_bus 0001:10: root bus resource [mem 0xf2200000-0xf3ffffff] [ 3.323885] pci_bus 0001:10: root bus resource [mem 0x340000000-0x37fffffff pref] [ 3.323922] pci 0001:10:00.0: [1d87:3566] type 01 class 0x060400 [ 3.323948] pci 0001:10:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 3.324010] pci 0001:10:00.0: supports D1 D2 [ 3.324019] pci 0001:10:00.0: PME# supported from D0 D1 D3hot [ 3.335284] pci 0001:10:00.0: Primary bus is hard wired to 0 [ 3.335326] pci 0001:10:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [ 3.335573] pci 0001:11:00.0: [10ec:8125] type 00 class 0x020000 [ 3.335643] pci 0001:11:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.335715] pci 0001:11:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit] [ 3.335762] pci 0001:11:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 3.336133] pci 0001:11:00.0: supports D1 D2 [ 3.336143] pci 0001:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.363660] pci_bus 0001:11: busn_res: [bus 11-1f] end is updated to 11 [ 3.363734] pci 0001:10:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff] [ 3.363748] pci 0001:10:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref] [ 3.363759] pci 0001:10:00.0: BAR 7: assigned [io 0x200000-0x200fff] [ 3.363773] pci 0001:11:00.0: BAR 2: assigned [mem 0xf2200000-0xf220ffff 64bit] [ 3.363815] pci 0001:11:00.0: BAR 4: assigned [mem 0xf2210000-0xf2213fff 64bit] [ 3.363856] pci 0001:11:00.0: BAR 0: assigned [io 0x200000-0x2000ff] [ 3.363874] pci 0001:10:00.0: PCI bridge to [bus 11] [ 3.363884] pci 0001:10:00.0: bridge window [io 0x200000-0x200fff] [ 3.363894] pci 0001:10:00.0: bridge window [mem 0xf2200000-0xf22fffff] [ 3.368416] pcieport 0001:10:00.0: PME: Signaling with IRQ 119 [ 4.058855] EXT4-fs (mmcblk2p8): mounted filesystem with ordered data mode. Quota mode: none. [ 4.229244] EXT4-fs (mmcblk2p9): mounted filesystem with ordered data mode. Quota mode: none. [ 4.236774] EXT4-fs (mmcblk2p9): re-mounted. Quota mode: none. [ 4.247698] overlayfs: "xino" feature enabled using 32 upper inode bits. [ 4.354400] init: Console is alive [ 4.354626] init: - watchdog - [ 5.491829] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 5.497831] Key type encrypted registered [ 5.703436] raid6: neonx8 gen() 3226 MB/s [ 5.873435] raid6: neonx4 gen() 3456 MB/s [ 6.043433] raid6: neonx2 gen() 3171 MB/s [ 6.213435] raid6: neonx1 gen() 2626 MB/s [ 6.383433] raid6: int64x8 gen() 2191 MB/s [ 6.553439] raid6: int64x4 gen() 2547 MB/s [ 6.723434] raid6: int64x2 gen() 2310 MB/s [ 6.893432] raid6: int64x1 gen() 1712 MB/s [ 6.893442] raid6: using algorithm neonx4 gen() 3456 MB/s [ 7.063430] raid6: .... xor() 2605 MB/s, rmw enabled [ 7.063440] raid6: using neon recovery algorithm [ 7.083976] xor: measuring software checksum speed [ 7.095558] 8regs : 861 MB/sec [ 7.108111] 32regs : 788 MB/sec [ 7.119569] arm64_neon : 863 MB/sec [ 7.119609] xor: using function: arm64_neon (863 MB/sec) [ 7.273377] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=yes [ 7.286709] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 7.297031] init: - preinit - [ 9.985579] mount_root: mounting /dev/root [ 10.010935] mount_root: loading kmods from internal overlay [ 10.290320] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 10.295096] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 10.584922] block: attempting to load /etc/config/fstab [ 10.586248] block: extroot: not configured [ 10.587956] urandom-seed: Seeding with /etc/urandom.seed [ 10.808012] procd: - early - [ 10.808190] procd: - watchdog - [ 11.407431] procd: - watchdog - [ 11.413848] procd: - ubus - [ 11.568177] procd: - init - [ 11.984604] urngd: v1.0.2 started. [ 12.250450] kmodloader: loading kernel modules from /etc/modules.d/* [ 12.282976] NET: Registered PF_ALG protocol family [ 12.336581] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.341896] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.343289] platform regulatory.0: Direct firmware load for regulatory.db.p7s failed with error -2 [ 12.343328] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db.p7s [ 12.386009] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.591.33.20 (20230621-1)(gdbe2bd9) [ 12.386009] drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Mar 29 2024 at 12:01:57 [ 12.386009] [ 12.386053] [dhd] STATIC-MSG) dhd_static_buf_init : 101.10.361.31 (wlan=r892223-20230427-1) [ 12.386298] [dhd] STATIC-MSG) dhd_init_wlan_mem : prealloc ok for index 0: 2369536(2314K) [ 12.386313] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter [ 12.386320] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: rfkill-wlan driver has not Successful initialized [ 12.386328] dhd_wlan_init_gpio: unknown oob irqflags ! [ 12.386334] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=-1, oob_irq_flags=0x0 [ 12.386341] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1 [ 12.386347] [dhd] dhd_wifi_platform_load: Enter [ 12.386381] [dhd] wifi_platform_bus_enumerate device present 1 [ 12.386389] [dhd] ======== Card detection to detect PCIE card! ======== [ 12.386493] [dhd] No Broadcom PCI device enumerated! [ 12.386533] [dhd] dhd_wifi_platform_load_pcie: dhd_bus_register failed err=-1 [ 12.386607] [dhd] unregister wifi platform drivers [ 12.386615] [dhd] wifi_platform_bus_enumerate device present 0 [ 12.386622] [dhd] ======== Card detection to remove PCIE card! ======== [ 12.386628] [dhd] dhd_wlan_deinit_gpio: gpio_free(WL_HOST_WAKE 0) [ 12.386645] [dhd] _dhd_module_init: Failed to load the driver, try cnt 0 [ 12.386652] [dhd] _dhd_module_init: Failed to load driver max retry reached** [ 12.386658] [dhd] STATIC-MSG) dhd_static_buf_exit : Enter [ 12.386945] [dhd] _dhd_module_init: Exit err=-1 [ 12.402570] Intel(R) Wireless WiFi driver for Linux [ 12.447137] usbcore: registered new interface driver mt76x2u [ 12.463696] usbcore: registered new interface driver mt7921u [ 12.469181] r8125: loading out-of-tree module taints kernel. [ 12.471113] r8125 2.5Gigabit Ethernet driver 9.010.01-NAPI loaded [ 12.471226] r8125 0002:21:00.0: enabling device (0000 -> 0003) [ 12.491522] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 12.493583] r8125 Copyright (C) 2022 Realtek NIC software team <nicfae@realtek.com> [ 12.493583] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. [ 12.493583] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 12.493856] r8125 2.5Gigabit Ethernet driver 9.010.01-NAPI loaded [ 12.493959] r8125 0001:11:00.0: enabling device (0000 -> 0003) [ 12.514012] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 12.516060] r8125 Copyright (C) 2022 Realtek NIC software team <nicfae@realtek.com> [ 12.516060] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. [ 12.516060] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 12.523394] usbcore: registered new interface driver r8152 [ 12.579511] RTW: module init start [ 12.579564] RTW: rtl88xxau v5.13.6-15-gc40b977e2.20210629 [ 12.579737] usbcore: registered new interface driver rtl88xxau [ 12.579749] RTW: module init ret=0 [ 12.625539] usbcore: registered new interface driver rtl8821cu [ 12.673991] usbcore: registered new interface driver rtl88x2bu [ 12.782635] NET: Registered PF_ATMPVC protocol family [ 12.782677] NET: Registered PF_ATMSVC protocol family [ 12.797374] ntfs3: Max link count 4000 [ 12.797418] ntfs3: Enabled Linux POSIX ACLs support [ 12.797424] ntfs3: Read-only LZX/Xpress compression included [ 12.803337] NET: Registered PF_KEY protocol family [ 12.815856] tun: Universal TUN/TAP device driver, 1.6 [ 12.861102] l2tp_core: L2TP core driver, V2.0 [ 12.866294] l2tp_netlink: L2TP netlink interface [ 12.883309] gre: GRE over IPv4 demultiplexor driver [ 12.889224] ip_gre: GRE over IPv4 tunneling driver [ 13.043606] cryptodev: driver 1.13 loaded. [ 13.055239] GACT probability on [ 13.060681] Mirror/redirect action on [ 13.095177] u32 classifier [ 13.095213] input device check on [ 13.095219] Actions configured [ 13.147196] usbcore: registered new interface driver cdc_ncm [ 13.151506] usbcore: registered new interface driver ipheth [ 13.152547] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 13.225271] PPP MPPE Compression module registered [ 13.226526] NET: Registered PF_PPPOX protocol family [ 13.227711] PPTP driver version 0.8.5 [ 13.280654] xt_time: kernel timezone is -0000 [ 13.291769] usbcore: registered new interface driver brcmfmac [ 13.299701] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 13.301549] usbcore: registered new interface driver cdc_mbim [ 13.305559] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 13.317068] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 13.317105] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 13.318621] Bridge firewalling registered [ 13.321396] kmodloader: done loading kernel modules from /etc/modules.d/* [ 16.173295] EXT4-fs (mmcblk0p1): recovery complete [ 16.175502] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [ 17.070469] fullcone nft_fullcone: failed to register a conntrack notifier. Disable active GC for mappings. [ 18.123691] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 18.685814] eth1: 0xffff80000ba20000, de:9f:c7:9f:ef:fe, IRQ 152 [ 18.731049] br-lan: port 1(eth1) entered blocking state [ 18.731096] br-lan: port 1(eth1) entered disabled state [ 18.731307] device eth1 entered promiscuous mode [ 18.761117] eth0: 0xffff80000ba60000, de:9f:c7:9f:ef:fd, IRQ 120 [ 22.161316] r8125: eth0: link up [ 22.161449] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.280189] netdata: epoll_ctl support in io_uring is deprecated and will be removed in a future Linux kernel version. [ 23.724149] platform mtd_vendor_storage: deferred probe pending [ 28.530910] br-5f69316eac83: port 1(veth7f39f0e) entered blocking state [ 28.530965] br-5f69316eac83: port 1(veth7f39f0e) entered disabled state [ 28.531568] device veth7f39f0e entered promiscuous mode [ 28.646134] br-5f69316eac83: port 2(veth27606f2) entered blocking state [ 28.646189] br-5f69316eac83: port 2(veth27606f2) entered disabled state [ 28.646658] device veth27606f2 entered promiscuous mode [ 28.647388] br-5f69316eac83: port 2(veth27606f2) entered blocking state [ 28.647430] br-5f69316eac83: port 2(veth27606f2) entered forwarding state [ 28.647697] br-5f69316eac83: port 2(veth27606f2) entered disabled state [ 29.514830] eth0: renamed from vethcb5d50f [ 29.625254] eth0: renamed from veth035388c [ 29.664881] IPv6: ADDRCONF(NETDEV_CHANGE): veth27606f2: link becomes ready [ 29.665169] br-5f69316eac83: port 2(veth27606f2) entered blocking state [ 29.665206] br-5f69316eac83: port 2(veth27606f2) entered forwarding state [ 29.665619] IPv6: ADDRCONF(NETDEV_CHANGE): br-5f69316eac83: link becomes ready [ 29.666890] IPv6: ADDRCONF(NETDEV_CHANGE): veth7f39f0e: link becomes ready [ 29.667092] br-5f69316eac83: port 1(veth7f39f0e) entered blocking state [ 29.667119] br-5f69316eac83: port 1(veth7f39f0e) entered forwarding state [ 30.031290] r8125: eth1: link up [ 30.031389] br-lan: port 1(eth1) entered blocking state [ 30.031403] br-lan: port 1(eth1) entered forwarding state [ 30.031837] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

friendlyarm / Actions-FriendlyWrt

Nanopi R5C eth1 not getting ip from br-lan but from wan #53