Open 0xD8C4A475 opened 7 years ago
To get a kernel with HDMI 1080P support, please try it this way:
touch .scmversion make nanopi3_linux_hdmi_defconfig make menuconfig Device Drivers --> Graphics support --> Nexell Graphics --> [ ] LCD [] HDMI (0) Display In [0=Display 0, 1=Display 1] Resolution (1920 1080p) ---> make uImage
After your compilation succeeds a uImage will be generated for HDMI 1080P. You can use it to replace the existing uImage.hdmi
[ 3.304000] ts-if initialized
[ 3.308000] [RTC] day=2016.01.01 time=08:00:00
[ 3.312000] nxp-rtc nxp-rtc.0: rtc core: registered nxp-rtc as rtc0
[ 3.320000] i2c /dev entries driver
[ 3.324000] ...................................ov5640_probe 2234
[ 3.328000] ...................................ov5640_video_probe 2193
[ 3.336000] ov5640 0-003c: reg_read: i2c read error, reg: 300a
[ 3.340000] OV5640 read error!!!!!!!!!!!!!!!
[ 3.344000] ov5640_initialize_ctrls.............1794...........
[ 3.352000] Error: Driver 'nxp_edid' is already registered, aborting...
[ 3.356000] nxp_edid_init: failed to i2c_add_driver()
[ 3.360000] hdmi_init_context: failed to nxp_edid_init()
[ 3.368000] register_nxp_hdmi: failed to hdmi_init_context()
[ 3.372000] register_nxp_out: failed to register_nxp_hdmi()
[ 3.380000] ------------[ cut here ]------------
[ 3.384000] WARNING: at kernel/irq/manage.c:1196 free_irq+0xa0/0x1c0()
[ 3.388000] Trying to free already-free IRQ 0
[ 3.392000] Modules linked in:
[ 3.396000] [
我的板子重新编译后输出这个, 是否需要将uboot也更新呢?好多年吃灰,最近玩一下,我的是pi m3, android5
I have multiple NanoPC-T3, but Impossible to update the kernel
Kernel update, debian, only 1080 HDMI (LVDS and LCD off). On boot: Error: Driver 'nxp_edid' is already registered, aborting... [ 3.104000] nxp_edid_init: failed to i2c_add_driver() [ 3.108000] hdmi_init_context: failed to nxp_edid_init() [ 3.116000] register_nxp_hdmi: failed to hdmi_init_context() [ 3.124000] register_nxp_out: failed to register_nxp_hdmi()
Complete kernel panic, and reboot loop.
In compile, everything is good: Image Name: Linux-3.4.39-s5p6818 Created: Wed Aug 23 16:39:49 2017 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4430176 Bytes = 4326.34 kB = 4.22 MB Load Address: 40008000 Entry Point: 40008000 Image arch/arm/boot/uImage is ready
But dont boot. With 1080, without 1080 (720p), or with hid_multitouch or without.
Can you give me a kernel, with 1080Hdmi and hid_multitouch module?