search

fritz-smh / yi-hack

Xiaomi Yi Ants camera hack
1.41k stars 339 forks source link

Wifi connection fail #208

Open Manu68 opened 6 years ago

Manu68 commented 6 years ago

I followed the tutorial, but when it comes to the wifi connection, the blue LED blinks, and 10 sec after, switches to orange. This sequence comes back again and again.

I change the configuration file to WPA2. Could it be the problem?

Thanx M

Manu68 commented 6 years ago

I changed WPA2 to WPA and in the log file, I can find the problem....

Starting to log... Hardware version informations : hwplatform=2 Software version informations : [sys] version=1.8.5.1M_201512011815 [kernel] version=3-0.8 provider=18e devtype=18e Firmware letter is : 'M' The RTSP server binary version which will be used is the 'M' The HTTP server binary version which will be used is the 'M' Check for some files size... -rwxr-xr-x 1 root root 144885 Oct 4 2016 /home/hd1/test/http/serverJ -rwxr-xr-x 1 root root 144912 Oct 4 2016 /home/hd1/test/http/serverM -rwxr-xr-x 1 root root 121932 Oct 4 2016 /home/hd1/test/rtspsvrI -rwxr-xr-x 1 root root 39572 Oct 4 2016 /home/hd1/test/rtspsvrK -rwxr-xr-x 1 root root 39580 Oct 4 2016 /home/hd1/test/rtspsvrM The blue led is currently blinking Debug mode = no Check for wifi configuration file...* /home/wpa_supplicant.conf Start wifi configuration... Status for wifi configuration=0 (0 is ok) Wifi configuration answer: Do network configuration 1/2 (ip and gateway) Done Configuration is : lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1452 (1.4 KiB) TX bytes:1452 (1.4 KiB)

ra0       Link encap:Ethernet  HWaddr B0:D5:9D:53:A4:E4  
          inet6 addr: fe80::b2d5:9dff:fe53:a4e4/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:200 (200.0 B)

Do network configuration 2/2 (DNS) Done Get time from a NTP server... But first, test the NTP server '0.uk.pool.ntp.org': Previous datetime is Thu Jan 1 00:00:22 GMT 1970 Done New datetime is Thu Jan 1 00:00:22 GMT 1970 Start blue led on Start ftp server... Check for ftp process : 1261 root 1716 S tcpsvd -vE 0.0.0.0 21 ftpd -w / Start http server : serverM... Check for http server process : 1288 root 1408 S ./serverM 80 Start rtsp server : rtspsvrM... Check for rtsp process : Start telnet server... Start telnet server... Start telnet server...

Clem- commented 6 years ago

Hi @Manu68, Did you fill yi-hack.cfg Network configuration ?

haicoi311 commented 6 years ago

I have the same problem. the yellow light keep blinking