all grounds are not being treated as if they were on the same bus

[davidperrenoud]

From irasc...@gmail.com on February 03, 2012 05:57:17

drop a usb connector and an arduino and mouse down on any ground connector. The ground connectors on the other part do not light up.

Original issue: http://code.google.com/p/fritzing/issues/detail?id=1824

[davidperrenoud]

From irasc...@gmail.com on February 03, 2012 05:18:42

Issue 1822 has been merged into this issue.

[davidperrenoud]

From irasc...@gmail.com on February 04, 2012 00:05:43

Labels: Milestone-0.7.1

[davidperrenoud]

From irasc...@gmail.com on February 05, 2012 06:24:41

Cc: stefanhermann79@googlemail.com andre.knoerig@gmail.com

[davidperrenoud]

From irasc...@gmail.com on February 06, 2012 01:19:42

this is correct--they should not automatically be on the same bus. which means that ground fill should also keep these separate

[davidperrenoud]

From irasc...@gmail.com on February 06, 2012 01:34:32

list of parts using "gnd", "ground", "-", or "vss":

\parts/contrib/SN74LS14N Schmitt Trigger.fzp: \parts/contrib/TPA2000D1 Audio Amplifier dip double.fzp: \parts/contrib/TPA2000D1 Audio Amplifier dip.fzp: \parts/contrib/TPA2000D1 Audio Amplifier smd.fzp: \parts/core/74HC595.fzp: \parts/core/AD5206 Digital Potentiometer.fzp: \parts/core/Adafruit_Atmega32u4_Breakout.fzp: \parts/core/Adafruit_Atmega32u4_Breakout.fzp: \parts/core/Arduino Ethernet Shield.fzp: \parts/core/Arduino Ethernet Shield.fzp: \parts/core/Arduino Ethernet Shield.fzp: \parts/core/Arduino Fio.fzp: \parts/core/Arduino Fio.fzp: \parts/core/Arduino LilyPad.fzp: \parts/core/Arduino Mini.fzp: \parts/core/Arduino Mini.fzp: \parts/core/Arduino Mini.fzp: \parts/core/Arduino Mini.fzp: \parts/core/Arduino Mini.fzp: \parts/core/Arduino Nano.fzp: \parts/core/Arduino Nano.fzp: \parts/core/arduino.fzp: \parts/core/arduino.fzp: \parts/core/arduino.fzp: \parts/core/arduino_mega.fzp: \parts/core/arduino_mega.fzp: \parts/core/arduino_mega.fzp: \parts/core/arduino_mega.fzp: \parts/core/arduino_mega.fzp: \parts/core/Arduino_UNO_R3.fzp: \parts/core/Arduino_UNO_R3.fzp: \parts/core/Arduino_UNO_R3.fzp: \parts/core/ATmega644.fzp: \parts/core/ATmega644.fzp: \parts/core/Barometric Pressure Sensor.fzp: \parts/core/controller_mbed.fzp: \parts/core/controller_pico.fzp: \parts/core/controller_wiring.fzp: \parts/core/controller_wiring.fzp: \parts/core/controller_wiring.fzp: \parts/core/controller_wiring.fzp: \parts/core/controller_wiring.fzp: \parts/core/controller_wiring_mini.fzp: \parts/core/controller_wiring_mini.fzp: \parts/core/din-5_midi_connector.fzp: \parts/core/din-5_midi_connector.fzp: \parts/core/din-5_midi_connector.fzp: \parts/core/din-5_midi_connector.fzp: \parts/core/EDGY_motor_control.fzp: \parts/core/EDGY_motor_control.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/gogoboard 4.0.fzp: \parts/core/infrared_proximity_sensor.fzp: \parts/core/KA78R05_Low_Dropout_Voltage_Regulator.fzp: \parts/core/led-rgb-6pin.fzp: \parts/core/led-rgb-6pin.fzp: \parts/core/lm34.fzp: \parts/core/lm35.fzp: \parts/core/Netduino.fzp: \parts/core/Netduino.fzp: <connector id="connector20" name="GND"...

[davidperrenoud]

From irasc...@gmail.com on February 06, 2012 01:34:32

... type="female"> \parts/core/Netduino.fzp: \parts/core/NetduinoMini.fzp: \parts/core/NetduinoMini.fzp: \parts/core/NetduinoPlus.fzp: \parts/core/NetduinoPlus.fzp: \parts/core/NetduinoPlus.fzp: \parts/core/Power plug.fzp: \parts/core/Power plug.fzp: \parts/core/Power plug.fzp: \parts/core/Real_Time_Clock_Module___DS1307_RTC_Breakout_Board.fzp: \parts/core/resonator-3pin.fzp: \parts/core/rfid-reader.fzp: \parts/core/servo.fzp: \parts/core/SMD_74HC595.fzp: \parts/core/SMD_AD5206.fzp: \parts/core/SMD_HTSSOP28.fzp: \parts/core/SMD_Vreg_7805.fzp: \parts/core/SN74LS14N.fzp: \parts/core/SN74LS20N.fzp: \parts/core/SN74LS21N.fzp: \parts/core/SN74LS32N.fzp: \parts/core/Teensy 2.0 ++.fzp: \parts/core/Teensy 2.0 ++.fzp: \parts/core/Teensy 2.0 ++.fzp: \parts/core/Teensy 2.0 ++.fzp: \parts/core/Teensy 2.0.fzp: \parts/core/Teensy 2.0.fzp: \parts/core/Teensy 2.0.fzp: \parts/core/thermalprinter.fzp: \parts/core/thermalprinter.fzp: \parts/core/tmp36.fzp: \parts/core/USB connector.fzp: \parts/core/usbadapter_wiring.fzp: \parts/core/usbadapter_wiring.fzp: \parts/core/voltage_regulator_7805.fzp: \parts/core/voltage_regulator_7833.fzp: \parts/core/Wiring_S.fzp: \parts/core/Wiring_S.fzp: \parts/core/WIZ820io.fzp: \parts/core/WIZ820io.fzp: \parts/core/WIZ820io.fzp: \parts/core/WIZ820io.fzp: \parts/core/xbee.fzp: \parts/obsolete/accelerometer-adxl.fzp: \parts/obsolete/AD5206 Digital Potentiometer.fzp: \parts/obsolete/Arduino Mini Pro.fzp: \parts/obsolete/Arduino Mini Pro.fzp: \parts/obsolete/Arduino Mini Pro.fzp: \parts/obsolete/Arduino Mini Pro.fzp: \parts/obsolete/basic_servo.fzp: \parts/obsolete/controller_arduino_diecimila.fzp: \parts/obsolete/controller_arduino_diecimila.fzp: \parts/obsolete/controller_arduino_diecimila.fzp: \parts/obsolete/led-rgb-6pin.fzp: \parts/obsolete/led-rgb-6pin.fzp: \parts/obsolete/resonator-3pin.fzp: \parts/obsolete/SMD_AD5206.fzp:

\parts/contrib/Peppermill Power Board.fzp: \parts/core/Arduino Fio.fzp: \parts/core/Arduino Nano.fzp: \parts/core/arduino.fzp: \parts/core/arduino.fzp: \parts/core/arduino.fzp: \parts/core/arduino.fzp: \parts/core/arduino_mega.fzp: \parts/core/Arduino_UNO_R3.fzp: \parts/core/Arduino_UNO_R3.fzp: \parts/core/Arduino_UNO_R3.fzp: \parts/core/Arduino_UNO_R3.fzp: \parts/core/atmega168.fzp: \parts/core/BASIC_Stamp_2.fzp: \parts/core/BASIC_Stamp_2e.fzp: \parts/core/BASIC_Stamp_2p24.fzp: \parts/core/BASIC_Stamp_2p40.fzp: \parts/core/BASIC_Stamp_2pe.fzp: \parts/core/BASIC_Stamp_2px24.fzp: \parts/core/BASIC_Stamp_2sx.fzp: \parts/core/battery-AA.fzp: \parts/core/controller_propeller_D40.fzp: \parts/core/controller_wiring.fzp: \parts/core/controller_wiring_mini.fzp: \parts/core/din-5_midi_connector.fzp: \parts/core/EDGY_motor_control.fzp: \parts/core/L293D.fzp: \parts/core/NetduinoMini.fzp: \parts/core/PICAXE_28.fzp: \parts/core/PICAXE_28A.fzp: \parts/core/PICAXE_28X.fzp: \parts/core/PICAXE_28X1.fzp: \parts/core/PICAXE_28X2.fzp: \parts/core/...

[davidperrenoud]

From irasc...@gmail.com on February 06, 2012 01:34:32

...PICAXE_28X2_3V.fzp: \parts/core/PICAXE_40X.fzp: \parts/core/PICAXE_40X1.fzp: \parts/core/PICAXE_40X2.fzp: \parts/core/PICAXE_40X2_3V.fzp: \parts/obsolete/artreeno.fzp: \parts/obsolete/battery-AA.fzp: \parts/obsolete/controller_arduino_diecimila.fzp:

\parts/core/4 x AAA Battery Mount.fzp: \parts/core/Battery block 9V.fzp: \parts/core/battery-AA.fzp: \parts/core/capacitor_electrolytic_large.fzp: \parts/core/capacitor_electrolytic_medium.fzp: \parts/core/capacitor_electrolytic_small.fzp: \parts/core/capacitor_tantalum_100mil.fzp: \parts/core/capacitor_tantalum_200mil.fzp: \parts/core/SMD_elko_0405.fzp: \parts/core/SMD_elko_0605.fzp: \parts/core/SMD_elko_0807.fzp: \parts/core/SMD_elko_1010.fzp: \parts/core/SMD_tantalum_capacitor_A_3216.fzp: \parts/core/SMD_tantalum_capacitor_B_3528.fzp: \parts/core/SMD_tantalum_capacitor_C_6032.fzp: \parts/core/SMD_tantalum_capacitor_D_7343.fzp: \parts/obsolete/Battery block 9V.fzp: \parts/obsolete/battery-AA.fzp: \parts/obsolete/capacitor_tantalum_0_1uF.fzp: \parts/obsolete/capacitor_tantalum_100uF.fzp: \parts/obsolete/capacitor_tantalum_10uF.fzp: \parts/obsolete/capacitor_tantalum_1uF.fzp: \parts/obsolete/electrolytic_capacitor_1000uF.fzp: \parts/obsolete/electrolytic_capacitor_100uF.fzp: \parts/obsolete/electrolytic_capacitor_10uF.fzp: \parts/obsolete/electrolytic_capacitor_1uF.fzp: \parts/obsolete/electrolytic_capacitor_220uF.fzp: \parts/obsolete/electrolytic_capacitor_22uF.fzp: \parts/obsolete/electrolytic_capacitor_4700uF.fzp: \parts/obsolete/electrolytic_capacitor_470uF.fzp: \parts/obsolete/electrolytic_capacitor_47uF.fzp: \parts/obsolete/electrolytic_capacitor_basic_10uF.fzp:

\parts/core/AD5206 Digital Potentiometer.fzp: \parts/core/BASIC_Stamp_1.fzp: \parts/core/BASIC_Stamp_2.fzp: \parts/core/BASIC_Stamp_2.fzp: \parts/core/BASIC_Stamp_2e.fzp: \parts/core/BASIC_Stamp_2e.fzp: \parts/core/BASIC_Stamp_2p24.fzp: \parts/core/BASIC_Stamp_2p24.fzp: \parts/core/BASIC_Stamp_2p40.fzp: \parts/core/BASIC_Stamp_2p40.fzp: \parts/core/BASIC_Stamp_2pe.fzp: \parts/core/BASIC_Stamp_2pe.fzp: \parts/core/BASIC_Stamp_2px24.fzp: \parts/core/BASIC_Stamp_2px24.fzp: \parts/core/BASIC_Stamp_2sx.fzp: \parts/core/BASIC_Stamp_2sx.fzp: \parts/core/controller_propeller_D40.fzp: \parts/core/controller_propeller_D40.fzp: \parts/core/HEF4094.fzp: \parts/core/lcd-GDM1602K.fzp: \parts/core/SMD_AD5206.fzp: \parts/obsolete/AD5206 Digital Potentiometer.fzp: \parts/obsolete/lcd-screen.fzp: \parts/obsolete/SMD_AD5206.fzp:

\resources\parts/core/dcpower.fzp: \resources\parts/core/ground.fzp: \resources\parts/core/dcpower.fzp: \resources\parts/core/ground.fzp:

[davidperrenoud]

From irasc...@gmail.com on February 06, 2012 22:41:17

Status: Duplicate
Mergedinto: 1835