search

frodef / nilan-cts600-homeassistant

Home Assistant integration for Nilan ventilation units with CTS600 controller.
The Unlicense
6 stars 2 forks source link

Failed to call service climate/set_hvac_mode. 'AUS' #11

Open ArctiaCaja opened 1 week ago

ArctiaCaja commented 1 week ago

Hey frodef,

Thanks for your work. Your CTS600 HA-Integration works like a charme in my installation (Nilan VPL15). I only found 2 small issues.

If I switch the Language in the CTS600 to "German" than I'll got an Error if I choose "nilan_central_ventilation_climate_control" to control the ventilation.
the Error-Message i got is: Failed to call service climate/set_hvac_mode. 'AUS' In this case i only can turn Off the unit. I was not able to turn it on or switch to Auto, Heating or Cooling mode.

The second Issue I found is that the Temperature sensors (T1,T2,T5 and T6) wont update there values regulary, The values keeps showing old values for hours. (last update) Even if I request the values within the menu ("Show data") the values keeps showing the old values. Is it possible to request the values on a regulary basis from the control unit?

I'm using the following versions. Core 2024.6.4 Supervisor 2024.06.0 Operating System 12.4 Frontend 20240610.1

Best regards ArctiaCaja

frodef commented 2 days ago

Hello, thanks for reporting the issue. However, the operation of this integration is based on having the CTS600 system language set to english, as explained in the README. If you use the manual mode to change this, all bets are really off.

Can you check if your problem with the values not changing persists with the language set to english?