i recently needed to replace a broken Dimmer with a new FUD71-230V.
It is working fine with the wall switches i have but unfortunately i am not
able to get it into openhab. I started scanning and than pressed a wall
switch to turn on the dimmer but nothing turned up in openhab.
I also tried to add it manually as A5-38 Central Command with the device address
as thingid and dimmer as profile but nothing happens when i use the dimmer
from wall switches and also i dont see a teach-in channel on the manually created
device so i can start the teach in process.
The trace logs show:
==> /var/log/openhab2/openhab.log <==
2018-12-11 20:27:51.204 [TRACE] [nal.transceiver.OpenOceanTransceiver] - Received Sync Byte
2018-12-11 20:27:51.307 [TRACE] [nal.transceiver.OpenOceanTransceiver] - Received header, data length 10 optional length 7 packet type 1
2018-12-11 20:27:51.678 [TRACE] [nal.transceiver.OpenOceanTransceiver] - publish event for: 050A7B7D
2018-12-11 20:27:51.688 [TRACE] [nal.transceiver.OpenOceanTransceiver] - A502000008050A7B7D0001FFFFFFFF5300
2018-12-11 20:27:51.694 [DEBUG] [an.handler.OpenOceanBaseThingHandler] - ESP Packet A502000008050A7B7D00 for 050a7b7d received
HI
i recently needed to replace a broken Dimmer with a new FUD71-230V. It is working fine with the wall switches i have but unfortunately i am not able to get it into openhab. I started scanning and than pressed a wall switch to turn on the dimmer but nothing turned up in openhab.
I also tried to add it manually as A5-38 Central Command with the device address as thingid and dimmer as profile but nothing happens when i use the dimmer from wall switches and also i dont see a teach-in channel on the manually created device so i can start the teach in process.
The trace logs show:
Any help would be greatly appreciated.
Martin