search

fruggy83 / openocean

27 stars 12 forks source link

Einrichten eines EnOcean Systems in openHAB #94

Open svin66 opened 4 years ago

svin66 commented 4 years ago

Hallo,

ich habe gestern diesen Post im openHAB Forum eingegeben, aber er scheint mir hier besser aufgehoben zu sein. Was mache ich falsch?

Danke für die Hilfe lg Sepp

Hi,

I’m struggeling to set up an EnOcean system in openHAB (2.5.3 on an RasPi 3). I have set up a KNX system and that works fine.

So far - with EnOcean - I managed:

discover with the Inbox in PaperUI the EnOcean USB 300 as a gateway
I added succesfully a rocket switcher (Eltako FT4F-rw, which is trained to a nodon SIN-2-2-01 aktor) however only manually as the scan function recognized it wrongly as a push button

But that was it. The openHAB system recognizes when I push the rocket switcher as shown in the log-viewer: 2020-06-07 22:10:07.646 [vent.ChannelTriggeredEvent] - enocean:rockerSwitch:e117XXXX:rockerswitchA triggered DIR1_PRESSED but vice-versa when I operate the switch in the control section of PaperUI nothing happens on my nodon aktor (which is perfectly switched when I push directly the switch). The log viewer also doesn’t show the enocean message as above, only that the item recieved the command ON.

I tried to add the nodon aktor with the scan function in PaperUI and putting it into training mode but it is rejected. Log viewer shows: 2020-06-07 21:24:35.726 [INFO ] [ernal.transceiver.EnOceanTransceiver] - Discard message because this is a teach-in telegram from 058CXXXX! It shows correctly the id of the aktor, the telegram is recieved but rejected.

What am I diong wrong? Why is the switcher recognized by the binding but doesn’t send a signal to switch the aktor?

many thanks for the help Sepp

mdillmann commented 4 years ago

Sepp, I replied on the forum. Here only things that could be bugs or future enhancements should be discussed.