DG: Commands in sequence diagram for "Adding a contact" is unreadable without considerable zooming

[frymash]

Issue The commands in the sequence diagram on page 20 ("Adding a contact") are not very readable by the human eye unless the reader zooms into the diagram by a few hundreds of percents.

Suggestions

• Scale the image up and make it bigger -- there still is some space on the right side of the diagram.
• Break the command up into multiple lines.

Screenshot of issue

Screenshot 2024-11-15 at 5.25.57 PM

[soc-se-bot]

Team's Response

This is a duplicate issue. Accepted this report

The 'Original' Bug

[The team marked this bug as a duplicate of the following bug]

Some contents of sequence diagrams are too small to be readable

Problem: Some sequence diagrams in the DG are too small, such that their contents are hardly readable to the reader.

Suggestions: Ensure that all diagrams are scaled appropriately.

---

_{[original: nus-cs2103-AY2425S1/pe-interim#2811] [original labels: type.DocumentationBug severity.VeryLow]}

Their Response to the 'Original' Bug

[This is the team's response to the above 'original' bug]

No details provided by team.

Items for the Tester to Verify

:question: Issue duplicate status

Team chose to mark this issue as a duplicate of another issue (as explained in the Team's response above)

• [ ] I disagree

Reason for disagreement: [replace this with your explanation]

---

## :question: Issue severity Team chose [`severity.VeryLow`] Originally [`severity.Low`] - [ ] I disagree **Reason for disagreement:** [replace this with your explanation]

---