search

fuacici / nikon-camera-control

Automatically exported from code.google.com/p/nikon-camera-control
0 stars 0 forks source link

several cameras #1

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
It's possible tocontrol several cameras.
that will be great.

Regards

Original issue reported on code.google.com by xptopr...@gmail.com on 15 Apr 2012 at 8:47

GoogleCodeExporter commented 8 years ago 
I fully agree, it would be a great feature :)

Original comment by vin...@vincen.org on 18 Apr 2012 at 4:44

GoogleCodeExporter commented 8 years ago 
I made some progress to support multiple cameras, but i need some tester and 
ideas to implement it.
First step i add a menu to select current device, but still just a single 
device can be controlled.
If somebody have time to do some tests send me a email.

Original comment by Duk...@gmail.com on 17 Jun 2012 at 7:45

GoogleCodeExporter commented 8 years ago 
Great.

Regarding the testing, I will try to get 3  of 4 cameras to test. if more good.

Some ideias.

Control several cameras even if they are diferente models
 - shot all at the same time
 - shot in sequence, the frist shot and then one after the other until the end
 - start to record videowall at the same time
 - download the pictures to the PC

Regards

Original comment by dr...@passosnoar.pt on 17 Jun 2012 at 10:03

GoogleCodeExporter commented 8 years ago 
I add a basic multiple camera support in 0.7.153 version, so if sombody have 
time pls make a short test

Original comment by Duk...@gmail.com on 23 Jun 2012 at 9:32

GoogleCodeExporter commented 8 years ago 
i can not installed it,,,,

Original comment by manuzet...@gmail.com on 23 Jun 2012 at 9:36

GoogleCodeExporter commented 8 years ago 
Do you get some error messages ? Pls post a screen shot with it.

Original comment by Duk...@gmail.com on 23 Jun 2012 at 9:56

GoogleCodeExporter commented 8 years ago 
it does not work on macosx so i tried with a xp pro. What system is recommanded 
?

Original comment by manuzet...@gmail.com on 23 Jun 2012 at 9:59

GoogleCodeExporter commented 8 years ago 
I recommend Windows 7, but should be work fine with Windows XP too, only thing 
on xp you should install windows media player 11.

Original comment by Duk...@gmail.com on 23 Jun 2012 at 10:06

GoogleCodeExporter commented 8 years ago 
ok i will try on windows 7

Original comment by manuzet...@gmail.com on 23 Jun 2012 at 10:07

GoogleCodeExporter commented 8 years ago 
I can confirm that multiple cameras work using a D5000 and a D3000. Having some 
of the features recommended above would be nice.

Original comment by atthepla...@gmail.com on 25 Jun 2012 at 4:31

GoogleCodeExporter commented 8 years ago 
I made improvements in this feature, i will glad if somebody with multiple 
cameras can do some test : 
https://dl.dropbox.com/u/40987577/NCCsetup_0.7.204.exe

Original comment by Duk...@gmail.com on 24 Aug 2012 at 4:54

GoogleCodeExporter commented 8 years ago 
i did  a review with D800's and D3s but it's gone ?

Original comment by manuzet...@gmail.com on 24 Aug 2012 at 5:38

GoogleCodeExporter commented 8 years ago 
Maybe google service do something wrong ...
Try to use google groups, maybe this work better: 
https://groups.google.com/forum/#!categories/ncc-google-group/general

Original comment by Duk...@gmail.com on 24 Aug 2012 at 5:55

GoogleCodeExporter commented 8 years ago 
Hello, 
Where is the source code? I would like to contribute but I can only download 
the exe. 
Thanks!

Original comment by martinpi...@gmail.com on 24 Aug 2012 at 6:34

GoogleCodeExporter commented 8 years ago 
There is in this site 
http://code.google.com/p/nikon-camera-control/source/checkout
you can use svn (http://www.visualsvn.com/) to download the surcecode.

Original comment by Duk...@gmail.com on 24 Aug 2012 at 6:40

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
At this moment how many can you control? can we insert cameras with several ush 
HUB's

Great job

Original comment by xptopr...@gmail.com on 24 Aug 2012 at 10:27

GoogleCodeExporter commented 8 years ago 
Isn't any limit in application, theoretically 126 per usb port using hubs, but 
to transfer 126 camera pictures take some time and this slow down extremely the 
work flow,
but without transferring photos should work..

Original comment by Duk...@gmail.com on 25 Aug 2012 at 6:22

GoogleCodeExporter commented 8 years ago 
Cool.

Another questions, it's possible to synchronize the time of  all cameras, and 
it's possible if wanted to shoot one after another.

Thanks

Original comment by xptopr...@gmail.com on 27 Aug 2012 at 9:42

GoogleCodeExporter commented 8 years ago 
I will implement in next version time synchronization.
Yes you can set the delay bigger that shutter speed.

Original comment by Duk...@gmail.com on 27 Aug 2012 at 2:58

GoogleCodeExporter commented 8 years ago 
We are using the Nikon SDK and can control multiple cameras to trigger and 
write the imagers to hard drive over unique USB ports.  Unfortunately, the 
Nikon driver will not actually process more than on camera at a time. So for 8 
cameras, it takes about 4.5 second to complete.  We need to capture and store 
all of the images in parallel.

Have you solved this problem?

Thanks

Original comment by t...@geospan.com on 1 Oct 2012 at 1:02

GoogleCodeExporter commented 8 years ago 
Hi, i don't use the SDK and i have just a single camera, so i don't know 
nothing about  transfer speed in multiple camera environment, but i'm sure the 
transfer speed isn't limited by the software it self.

If you have time you can do some tests using this version:  
https://dl.dropbox.com/u/40987577/NCC/NCCsetup_0.7.266.exe

Original comment by Duk...@gmail.com on 1 Oct 2012 at 5:45

GoogleCodeExporter commented 8 years ago

Original comment by Duk...@gmail.com on 5 Dec 2012 at 2:13