function3d
commented
1 year ago Hi Till,
I don't think it can be repaired, you should try another one and make sure you plug it in the correct position and power it with 5 volts.
Good luck,
Raúl, Function.3D
On Fri, Mar 17, 2023, 09:33 Till @.***> wrote:
Hi,I'm a big fan from Germany, we recently build your machine with the pcb (manufactured at JLCPCB) and all components for a school project. I set everything up and turned the potentiometers correctly, but as I turned on the whole system the wemos rustle and the led didn't get that bright anymore. I can't flash it right now because it gets very hot while writing.
I don't know if it's my fault, but I rule out a short circuit.
can I repair the wemos?
Thanks for that cool project!!!
— Reply to this email directly, view it on GitHub https://github.com/function3d/petalot/issues/22, or unsubscribe https://github.com/notifications/unsubscribe-auth/A2GTVHYRXIPBVXCTSULYVW3W4QOT7ANCNFSM6AAAAAAV6HJQDU . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Hi,I'm a big fan from Germany, we recently build your machine with the pcb (manufactured at JLCPCB) and all components for a school project. I set everything up and turned the potentiometers correctly, but as I turned on the whole system the wemos rustle and the led didn't get that bright anymore. I can't flash it right now because it gets very hot while writing.
I don't know if it's my fault, but I rule out a short circuit.
can I repair the wemos?
Thanks for that cool project!!!