Just a little doubt

[RuhtraXD]

For power do you use 2 positive and negative 12V wires connected to the board? Is there no risk of closing the circuit?

[function3d]

I don't understand your question, every electrical circuit needs two wires (positive and negative) to be powered.

On Sat, Mar 18, 2023, 16:24 RuhtraXD @.***> wrote:

For power do you use 2 positive and negative 12V wires connected to the board? Is there no risk of closing the circuit?

— Reply to this email directly, view it on GitHub https://github.com/function3d/petalot/issues/23, or unsubscribe https://github.com/notifications/unsubscribe-auth/A2GTVH277D6BW6UKEK6QK5DW4XHSJANCNFSM6AAAAAAV7Q5YZA . You are receiving this because you are subscribed to this thread.Message ID: @.***>

[RuhtraXD]

I mean, should I use 12V positive and 12V negative or should I use 12V positive and negative?

[function3d]

Of course, you must use 12V and ground

On Sat, Mar 18, 2023, 19:27 RuhtraXD @.***> wrote:

Should I use 12V positive and 12V negative or should I use 12V positive and negative?

— Reply to this email directly, view it on GitHub https://github.com/function3d/petalot/issues/23#issuecomment-1474939065, or unsubscribe https://github.com/notifications/unsubscribe-auth/A2GTVHZHSWMWZEDFCAQCF7LW4X5B3ANCNFSM6AAAAAAV7Q5YZA . You are receiving this because you commented.Message ID: @.***>

[RuhtraXD]

Understood, thanks for the assistance, you're doing a great job with this project.

[gulsinho06]

ruhtra meu novo dc sparkinho_ pede amizade