Closed Deses closed 1 year ago
Here's the current table (with dead links) in markdown format in case you want to do the switch, saving you some work. :)
\* These parts are not tested by me because I did not buy them. I replaced them with things I already had.
| Qty | Name | Aliexpress (for reference) |
| ------ | --------------------------------------------------------------------------------------------- | ------------------------------------------ |
| ------ | ----------- **Bottle cutter** ------------------------------------------------- | ------------------------------------------ |
| 2 | bearing 6200 ZZ high speed 10x30x9 | https://s.click.aliexpress.com/e/_DBCB7qJ |
| \*2 | M8 Hex Bolt 60mm Full Thread | https://s.click.aliexpress.com/e/_DF8rC8x |
| \*3 | Hex Nut M8 | https://s.click.aliexpress.com/e/_DdAzvUJ |
| \*1 | Hexagonal Bolt Partial Thread M8 40mm DIN931 | https://s.click.aliexpress.com/e/_DCCHxur |
| \*2+ | Flat Washer M8 16x1 | https://s.click.aliexpress.com/e/_DdBx3SF |
| \*2 | M8 Hex Nylon Insert Lock Nut Self-locking Locknut | https://s.click.aliexpress.com/e/_At5Tpj |
| \*1 | Threaded Rod 6mm (any 6mm rod will work, I used a carbon fiber rod from a kite) | https://s.click.aliexpress.com/e/_DEQQjrz |
| ------ | ----------- **Electronics** --------------------------------------------------- | ------------------------------------------ |
| 1 | Power Supply 12v 5A | https://s.click.aliexpress.com/e/_DEF56Ef |
| 1 | Wemos D1 MINI V3.0.0 | https://s.click.aliexpress.com/e/_9GGvad |
| 1 | Mini DC-DC 12-24V To 5V 3A Step Down | https://s.click.aliexpress.com/e/_A8abPX |
| 1 | Mini Micro Limit Switch Roller Lever Arm | https://s.click.aliexpress.com/e/_AqJnzx |
| 1 | A4988 DRV8825 Stepper Motor Driver With Heat sink | https://s.click.aliexpress.com/e/_AMKH4t |
| 1 | Nema 17 stepper motor 42 motor height 38mm 1.2A D shaped shaft | https://s.click.aliexpress.com/e/_AfngLT |
| 1 | IRLZ44N MOSFET | https://s.click.aliexpress.com/e/_DkRy2Mx |
| 1 | Hotend MK8 Extrusion Aluminum Block 20x20x10mm with Thermistor Ceramic and Heater 12V 40W | https://s.click.aliexpress.com/e/_9QSRwl |
| \*1 | capacitor 100uf 16V | https://s.click.aliexpress.com/e/_DkEQAV5 |
| \*x | pin header | https://s.click.aliexpress.com/e/_Ddiwa2P |
| 3 | terminal blocks 2P | https://s.click.aliexpress.com/e/_DdfJlAb |
| \*2 | 10K ohms resistors | https://s.click.aliexpress.com/e/_DkDLncf |
| \*50cm | 2 wire cable for limit switch, digital signal | https://s.click.aliexpress.com/e/_Dlnn1bd |
| \*50cm | 2 wire cable for 5A+ | https://s.click.aliexpress.com/e/_Dlnn1bdd |
| \*1 | 10A 250V Inlet Module Plug Rocker Switch Male Power Socket 3 Pin IEC320 C14 switch + Fuse New | https://s.click.aliexpress.com/e/_DmXiViX |
| ------ | ----------- **Hardware** ---------------------------------------------------- | ------------------------------------------ |
| 1 | MK8 Brass Nozzle 0.4MM | https://s.click.aliexpress.com/e/_ANswWD |
| 4 | Bearing 8x22x7 mm 608ZZ | https://s.click.aliexpress.com/e/_DDu60K3 |
| 1 | Stainless Steel 90 Degree Angle Bracket Corner 20x20mm | https://s.click.aliexpress.com/e/_ACOtVF |
| \*2 | M8 x 100mm A2 Hex Head Screw Bolt | https://s.click.aliexpress.com/e/_AY2LNb |
| \*2 | M8 Hex Nylon Insert Lock Nut Self-locking Locknut | https://s.click.aliexpress.com/e/_At5Tpj |
| \*1 | M3 8mm Bolt for the motor gear | https://s.click.aliexpress.com/e/_DelUMSF |
| \*3 | M3 14mm Bolt for motor mount | https://s.click.aliexpress.com/e/_DelUMSF |
| \*50cm | Paracord 2mm(nylon string) (I used polyester thread for kite handles) | https://s.click.aliexpress.com/e/_99oV2Hv |
| \*1 | 1.7mm drill bit | https://s.click.aliexpress.com/e/_DD1SYVV |
* These parts are not tested by me because I did not buy them. I replaced them with things I already had. | Qty | Name | Aliexpress (for reference) |
---|---|---|---|
------ | ----------- Bottle cutter ------------------------------------------------- | ------------------------------------------ | |
2 | bearing 6200 ZZ high speed 10x30x9 | https://s.click.aliexpress.com/e/_DBCB7qJ | |
*2 | M8 Hex Bolt 60mm Full Thread | https://s.click.aliexpress.com/e/_DF8rC8x | |
*3 | Hex Nut M8 | https://s.click.aliexpress.com/e/_DdAzvUJ | |
*1 | Hexagonal Bolt Partial Thread M8 40mm DIN931 | https://s.click.aliexpress.com/e/_DCCHxur | |
*2+ | Flat Washer M8 16x1 | https://s.click.aliexpress.com/e/_DdBx3SF | |
*2 | M8 Hex Nylon Insert Lock Nut Self-locking Locknut | https://s.click.aliexpress.com/e/_At5Tpj | |
*1 | Threaded Rod 6mm (any 6mm rod will work, I used a carbon fiber rod from a kite) | https://s.click.aliexpress.com/e/_DEQQjrz | |
------ | ----------- Electronics --------------------------------------------------- | ------------------------------------------ | |
1 | Power Supply 12v 5A | https://s.click.aliexpress.com/e/_DEF56Ef | |
1 | Wemos D1 MINI V3.0.0 | https://s.click.aliexpress.com/e/_9GGvad | |
1 | Mini DC-DC 12-24V To 5V 3A Step Down | https://s.click.aliexpress.com/e/_A8abPX | |
1 | Mini Micro Limit Switch Roller Lever Arm | https://s.click.aliexpress.com/e/_AqJnzx | |
1 | A4988 DRV8825 Stepper Motor Driver With Heat sink | https://s.click.aliexpress.com/e/_AMKH4t | |
1 | Nema 17 stepper motor 42 motor height 38mm 1.2A D shaped shaft | https://s.click.aliexpress.com/e/_AfngLT | |
1 | IRLZ44N MOSFET | https://s.click.aliexpress.com/e/_DkRy2Mx | |
1 | Hotend MK8 Extrusion Aluminum Block 20x20x10mm with Thermistor Ceramic and Heater 12V 40W | https://s.click.aliexpress.com/e/_9QSRwl | |
*1 | capacitor 100uf 16V | https://s.click.aliexpress.com/e/_DkEQAV5 | |
*x | pin header | https://s.click.aliexpress.com/e/_Ddiwa2P | |
3 | terminal blocks 2P | https://s.click.aliexpress.com/e/_DdfJlAb | |
*2 | 10K ohms resistors | https://s.click.aliexpress.com/e/_DkDLncf | |
*50cm | 2 wire cable for limit switch, digital signal | https://s.click.aliexpress.com/e/_Dlnn1bd | |
*50cm | 2 wire cable for 5A+ | https://s.click.aliexpress.com/e/_Dlnn1bdd | |
*1 | 10A 250V Inlet Module Plug Rocker Switch Male Power Socket 3 Pin IEC320 C14 switch + Fuse New | https://s.click.aliexpress.com/e/_DmXiViX | |
------ | ----------- Hardware ---------------------------------------------------- | ------------------------------------------ | |
1 | MK8 Brass Nozzle 0.4MM | https://s.click.aliexpress.com/e/_ANswWD | |
4 | Bearing 8x22x7 mm 608ZZ | https://s.click.aliexpress.com/e/_DDu60K3 | |
1 | Stainless Steel 90 Degree Angle Bracket Corner 20x20mm | https://s.click.aliexpress.com/e/_ACOtVF | |
*2 | M8 x 100mm A2 Hex Head Screw Bolt | https://s.click.aliexpress.com/e/_AY2LNb | |
*2 | M8 Hex Nylon Insert Lock Nut Self-locking Locknut | https://s.click.aliexpress.com/e/_At5Tpj | |
*1 | M3 8mm Bolt for the motor gear | https://s.click.aliexpress.com/e/_DelUMSF | |
*3 | M3 14mm Bolt for motor mount | https://s.click.aliexpress.com/e/_DelUMSF | |
*50cm | Paracord 2mm(nylon string) (I used polyester thread for kite handles) | https://s.click.aliexpress.com/e/_99oV2Hv | |
*1 | 1.7mm drill bit | https://s.click.aliexpress.com/e/_DD1SYVV |
done, thanks for the suggestion and help
I've found some dead links in the BOM, and found some possibly suitable replacements. Please verify if they are the proper ones.
Mini Micro Limit Switch Roller Lever Arm
--> https://es.aliexpress.com/item/1926553469.htmlIRLZ44N MOSFET
--> https://es.aliexpress.com/item/1005002474344551.htmlcapacitor 100uf 16V
--> https://es.aliexpress.com/item/1005002842732971.htmlpin header
--> https://es.aliexpress.com/item/32735482077.htmlAlso, you should maybe consider migrating the BOM to a Github Wiki page to keep everything in one single resource.
Gracias!