Error messages, bug messages

[bonna79]

Despite updating the Insert coin script, when it is executed, it gives me a series of errors, that is, it fails to create folders on the external usb. Such messages have been appearing to me for about 2 days. I don't know if I'm wrong or something's missing. I attach some photos to better understand what is happening. Thank you

[bonna79]

Update:

I copied manually, the folder that could not create or ?Arcade , in the root of my USB stick, now the only mistake that appears is what you see in the picture. I left the same folder, ?Arcade, also on the micro sd inside the FPGA coach. I don't know where I'm wrong. Thank you ps: to the photos

[funkycochise]

hello Bonna79,

I have added the following section in setup.ini :

[setup]

SD : installs on internal SD

USB : installs on external USB

CIFS : installs on mounted CIFS

NONE : disabled

setup_gw=SD setup_mame=SD setup_res=SD

could you please give it a try according to your setup ?

[bonna79]

hello Bonna79,

I have added the following section in setup.ini :

[setup] #SD : installs on internal SD #USB : installs on external USB #CIFS : installs on mounted CIFS #NONE : disabled setup_gw=SD setup_mame=SD setup_res=SD

could you please give it a try according to your setup ?

I willing later I feel it a lot thanks for its availability

cordially emanuele

[bonna79]

Thank you again for your help.

I did 2 tests, the first I left the setup.ini file unchanged as it was set by her. The result is what you come in photos below

The second attempt I have referred the file setup.ini as follows:

[reserved] version=3

[update] main_mister=0 mame_rom=1 gnw_rom=1 console_core=0

dualsdram=0 ; single SDRAM core

dualsdram=1 ; Dual SDRAM core

dualsdram=2 ; Both Single and Dual SDRAM cores

dualsdram=0

[console] psx=1 s32x=1 saturn=1 sgb=1 neogeo=1 n64=1

[clean] console_mgl=0 obsolete_core=0 remove_other=0

[setup]

SD : installs on internal SD

USB : installs on external USB

CIFS : installs on mounted CIFS

NONE : disabled

setup_gw=USB setup_mame=USB setup_res=USB

[folder] manufacturer_subfolder=1 action=1 beat=1 horizontal=1 newest=1 puzzle=1 sport=1 stg_h=1 stg_v=1 vertical=1 vsf=1

---

setting how to do USB to all three lines. The result and as from the photo below:

In both cases I did not find any error on the screen and the script has always installed on micro sd card, and it is fine.

---

out.txt output.log These files refer to the last attempt.

Thank you for everything cordially emanuele

Ps: Let me know if you need any more evidence or files/videos to help you.

[bonna79]

Yesterday, after doing an update all and then an update all insert coin, the result is as seen in the photo. I'm attaching the photo below

[funkycochise]

I will try again on my side