grego1981
commented
3 years ago Also the output of the agent is:
> fusioninventory-netinventory --credentials version:2c,community:v2cpublic --debug --host IP
[debug] creating 1 worker threads
[debug] [thread 1] creation
[debug] [thread 1] scanning 0
[debug] no match for sysobjectID .1.3.6.1.4.1.40093.1.1 in database: unknown manufacturer ID
[debug] [thread 1] termination
<?xml version="1.0" encoding="UTF-8" ?>
<REQUEST>
<CONTENT>
<DEVICE>
<INFO>
<COMMENTS>MFG:Pantum;CMD:ACL,PJL,PL,PCL,PCLXL,PS3,PDF;MDL:M7100DW series;CID:Pantum M7100DW series;CLS:PRINTER;DES:Pantum M7100DW series;</COMMENTS>
<CONTACT>unknown</CONTACT>
<ID>0</ID>
<IPS>
<IP>127.0.0.1</IP>
<IP>199.x.x.x</IP>
<IP>191.x.x.x</IP>
</IPS>
<LOCATION>Fabrica</LOCATION>
<MAC>44:ef:bf:cb:4f:8f</MAC>
<MODEL>M7100DW</MODEL>
<NAME>M7100DW</NAME>
<TYPE>PRINTER</TYPE>
<UPTIME>11 minutes, 20.77</UPTIME>
</INFO>
<PORTS>
<PORT>
<IFDESCR>lo</IFDESCR>
<IFINERRORS>0</IFINERRORS>
<IFINOCTETS>60637</IFINOCTETS>
<IFINTERNALSTATUS>1</IFINTERNALSTATUS>
<IFLASTCHANGE>0.00 seconds</IFLASTCHANGE>
<IFMTU>16436</IFMTU>
<IFNAME>lo</IFNAME>
<IFNUMBER>1</IFNUMBER>
<IFOUTERRORS>0</IFOUTERRORS>
<IFOUTOCTETS>60637</IFOUTOCTETS>
<IFSPEED>10000000</IFSPEED>
<IFSTATUS>1</IFSTATUS>
<IFTYPE>24</IFTYPE>
<IP>127.0.0.1</IP>
<IPS>
<IP>127.0.0.1</IP>
</IPS>
</PORT>
<PORT>
<IFDESCR>eth0</IFDESCR>
<IFINERRORS>0</IFINERRORS>
<IFINOCTETS>0</IFINOCTETS>
<IFINTERNALSTATUS>1</IFINTERNALSTATUS>
<IFLASTCHANGE>0.00 seconds</IFLASTCHANGE>
<IFMTU>1500</IFMTU>
<IFNAME>eth0</IFNAME>
<IFNUMBER>2</IFNUMBER>
<IFOUTERRORS>0</IFOUTERRORS>
<IFOUTOCTETS>28111</IFOUTOCTETS>
<IFSPEED>0</IFSPEED>
<IFSTATUS>1</IFSTATUS>
<IFTYPE>6</IFTYPE>
<MAC>ac:c5:1b:14:2b:52</MAC>
</PORT>
<PORT>
<IFDESCR>sit0</IFDESCR>
<IFINERRORS>0</IFINERRORS>
<IFINOCTETS>0</IFINOCTETS>
<IFINTERNALSTATUS>2</IFINTERNALSTATUS>
<IFLASTCHANGE>0.00 seconds</IFLASTCHANGE>
<IFMTU>1480</IFMTU>
<IFNAME>sit0</IFNAME>
<IFNUMBER>3</IFNUMBER>
<IFOUTERRORS>0</IFOUTERRORS>
<IFOUTOCTETS>0</IFOUTOCTETS>
<IFSPEED>0</IFSPEED>
<IFSTATUS>2</IFSTATUS>
<IFTYPE>131</IFTYPE>
</PORT>
<PORT>
<IFDESCR>mlan0</IFDESCR>
<IFINERRORS>0</IFINERRORS>
<IFINOCTETS>142398120</IFINOCTETS>
<IFINTERNALSTATUS>1</IFINTERNALSTATUS>
<IFLASTCHANGE>0.00 seconds</IFLASTCHANGE>
<IFMTU>1500</IFMTU>
<IFNAME>mlan0</IFNAME>
<IFNUMBER>4</IFNUMBER>
<IFOUTERRORS>0</IFOUTERRORS>
<IFOUTOCTETS>12310298</IFOUTOCTETS>
<IFSPEED>0</IFSPEED>
<IFSTATUS>1</IFSTATUS>
<IFTYPE>6</IFTYPE>
<IP>199.x.x.x</IP>
<IPS>
<IP>199.x.x.x</IP>
</IPS>
<MAC>44:ef:bf:cb:4f:8f</MAC>
</PORT>
<PORT>
<IFDESCR>wfd0</IFDESCR>
<IFINERRORS>0</IFINERRORS>
<IFINOCTETS>0</IFINOCTETS>
<IFINTERNALSTATUS>1</IFINTERNALSTATUS>
<IFLASTCHANGE>0.00 seconds</IFLASTCHANGE>
<IFMTU>1500</IFMTU>
<IFNAME>wfd0</IFNAME>
<IFNUMBER>5</IFNUMBER>
<IFOUTERRORS>61</IFOUTERRORS>
<IFOUTOCTETS>0</IFOUTOCTETS>
<IFSPEED>0</IFSPEED>
<IFSTATUS>1</IFSTATUS>
<IFTYPE>6</IFTYPE>
<IP>191.x.x.x</IP>
<IPS>
<IP>191.x.x.x</IP>
</IPS>
<MAC>46:ef:bf:cb:4f:8f</MAC>
</PORT>
</PORTS>
</DEVICE>
<MODULEVERSION>2.6</MODULEVERSION>
<PROCESSNUMBER>1</PROCESSNUMBER>
</CONTENT>
<DEVICEID>foo</DEVICEID>
<QUERY>SNMPQUERY</QUERY>
</REQUEST>
[debug] cleaning 1 worker threads
g-bougard
Kearvan
Hi all,
We have a Pantum M7100DW printer, SNMP is not detecting its serial number thus not importing it, by enabling the add by MAC address rule it was detected but only the model was populated, no page satistics or toner levels, or even serial number. Below is the walk output and the snmpget command from the readme, hope we can make it work!