search

fvdhoef / aquarius-plus

Official Aquarius+ repository
MIT License
43 stars 9 forks source link

Can't Run AQDS.AQX on a V0.22 + v0.18 System #56

Closed 1stage closed 9 months ago

1stage commented 9 months ago

On my system running V0.22 OS and v0.18 pB, when I get into the aqds folder, and RUN "AQDS.AQX" it shows

Ok run Ok aqds/fileman.bin

Not sure what to do. Runs fine on other systems upgraded to V0.22 via esp:settings > updategh > V0.22

1stage commented 9 months ago

https://github.com/fvdhoef/aquarius-plus/assets/20803301/35ab7edd-f0c7-4662-9a68-a7bc70f21018

fvdhoef commented 9 months ago

Did you update the system that shows the weird behaviour on DevStudio also via updategh? Is this the first rev2 board (the same one I have)? Maybe there is some hardware issue? For example the banking pins? (high address lines of the RAM) DevStudio is running from page 40-44

1stage commented 9 months ago

Yes, it was via an updategh.

It is the WHITE prototype board which you and I have (and a few others). When I opened the case to try a USB-BASED update, the SD card reader game loose from the side mounts, so I have to fix that as well now. I'll check the RAM pins all around when I do this.

fvdhoef commented 9 months ago

Any update on this?

1stage commented 9 months ago

This motherboard seems to have issues. I've reflowed the chips, but the system could not recover from an updategh.

I will USB upload the image again and report back.

1stage commented 9 months ago

V0.22b loaded (USB) and SD card updated, still having issues with running AQDS.

This seems to be specific to this prototype PCB. Not having issues with other, production hardware, either standard or mini form-factors.