fwupd constantly using 100% of one CPU on Ubuntu 16.10

superm1 commented 8 years ago

@marco-c:

Will need some details to debug this further.

Can you comment more on the reproducibility? Is this happening every boot? When you plug in a USB device? After some apt updates?
Share the output of # lsusb
Share output of # dmesg
Make a copy of all files in /var/lib/app-info/yaml/. They may be needed to investigate further if the stacktrace shows the need, but they get updated daily with apt updates so if this problem is transient it would be important to see them in what would be a corrupted state.
A current stack trace to figure out where fwupd is spinning while using 100% CPU. See more details at https://github.com/hughsie/fwupd/wiki/Ubuntu-backtracing for how to capture this stacktrace.

marco-c commented 8 years ago

Can you comment more on the reproducibility? Is this happening every boot? When you plug in a USB device? After some apt updates?

As far as I can tell, it is intermittent. It's unrelated to USB devices (I reproduced it once without any USB device plugged-in, another time with a USB mouse). The regression started after I updated to 16.10, so it's really hard to tell if a specific package is at fault.

Share the output of # lsusb

Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 138a:0017 Validity Sensors, Inc. Fingerprint Reader
Bus 003 Device 003: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
Bus 003 Device 002: ID 046d:c05b Logitech, Inc. M-U0004 810-001317 [B110 Optical USB Mouse]
Bus 003 Device 007: ID 0765:5010 X-Rite, Inc. 
Bus 003 Device 006: ID 5986:026a Acer, Inc 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Share output of # dmesg

I've currently uninstalled fwupd as a workaround. Do you want me to send you the dmesg output after I reinstall it and while I run into the problem, or does any output work?

Make a copy of all files in /var/lib/app-info/yaml/

yaml.zip

A current stack trace to figure out where fwupd is spinning while using 100% CPU

Will do after I run into the problem again.

superm1 commented 8 years ago

Will do after I run into the problem again.

Thanks. The stack trace will be the most important piece to narrow down further.

I've currently uninstalled fwupd as a workaround. Do you want me to send you the dmesg output after I reinstall it and while I run into the problem, or does any output work?

After you run into the problem. The main thing looking for in the output is any messages from other parts of the system having problems (such as kernel drivers). This would help to narrow it down.

Make a copy of all files in /var/lib/app-info/yaml/

If you do reproduce this again, please repeat this step and we can use it as a basis for comparison in case it is indeed yaml related.

Share the output of # lsusb

You do have a few "built-in" devices that are there even without your USB mouse plugged in, so it's entirely possible that one of them say has a DFU endpoint with some problems.

Same thing with this, let's compare if a USB device drops off the bus or goes into DFU mode (different VID/PID) if/when you reproduce this.

superm1 commented 8 years ago

yaml.zip

Next time you attach this, can you have it follow symlinks? The files are empty in what you attached.

marco-c commented 8 years ago

Next time you attach this, can you have it follow symlinks? The files are empty in what you attached.

Oops, I hadn't noticed :)

marco-c commented 8 years ago

fwupd.zip

Looks like it might be happening after some apt updates.

marco-c commented 8 years ago

It's happening every time I boot now.

Burusutazu commented 8 years ago

I'm having the same issue. It happens at startup and is caused by gnome-software/ubuntu-software. If I kill the processes I can make it reoccur by opening ubuntu-software. Apologies if this is not the correct format, never used GitHub before.

lsusb output:

Bus 001 Device 002: ID 8087:8001 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 04f3:2033 Elan Microelectronics Corp. 
Bus 002 Device 004: ID 8087:0a2a Intel Corp. 
Bus 002 Device 003: ID 0c45:64cb Microdia 
Bus 002 Device 006: ID 0483:91d1 STMicroelectronics Sensor Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg output:

[    0.000000] microcode: CPU0 microcode updated early to revision 0x22, date = 2015-09-11
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-45-generic (buildd@lgw01-34) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 (Ubuntu 4.4.0-45.66-generic 4.4.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic.efi.signed root=UUID=4676ebe4-a3dd-46af-b852-ab7f88aa2684 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000869d9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000869da000-0x00000000872d9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000872da000-0x000000009c4cefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c4cf000-0x000000009cebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x853c1018-0x853d1057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000853c1017] usable
[    0.000000] reserve setup_data: [mem 0x00000000853c1018-0x00000000853d1057] usable
[    0.000000] reserve setup_data: [mem 0x00000000853d1058-0x00000000869d9fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000869da000-0x00000000872d9fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000872da000-0x000000009c4cefff] usable
[    0.000000] reserve setup_data: [mem 0x000000009c4cf000-0x000000009cebefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] efi: EFI v2.40 by Dell Inc.
[    0.000000] efi:  ESRT=0x9c743d18  SMBIOS=0x9c742000  ACPI 2.0=0x9cffe014 
[    0.000000] esrt: Reserving ESRT space from 0x000000009c743d18 to 0x000000009c743d50.
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc. Inspiron 7348/067RT2, BIOS A08 11/13/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 16GB, type WB
[    0.000000] reg 1, base: 2512MB, range: 16MB, type UC
[    0.000000] reg 2, base: 2528MB, range: 32MB, type UC
[    0.000000] reg 3, base: 2560MB, range: 512MB, type UC
[    0.000000] reg 4, base: 3GB, range: 1GB, type UC
[    0.000000] total RAM covered: 14800M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 64M     num_reg: 6      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 512MB, type WB
[    0.000000] reg 2, base: 2512MB, range: 16MB, type UC
[    0.000000] reg 3, base: 2528MB, range: 32MB, type UC
[    0.000000] reg 4, base: 4GB, range: 4GB, type WB
[    0.000000] reg 5, base: 8GB, range: 8GB, type WB
[    0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000080000] 80000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3dc19000-0x3fffafff]
[    0.000000] Secure boot enabled
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x000000009CFC6188 0000EC (v01 DELL   WN09     00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF1000 00010C (v05 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: DSDT 0x000000009CFD4000 0165EF (v02 DELL   WN09     00000000 ASL  00040000)
[    0.000000] ACPI: FACS 0x000000009CFB7000 000040
[    0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFB000 000042 (v01 DELL   WN09     00000000 ASL  00040000)
[    0.000000] ACPI: MSDM 0x000000009CFFA000 000055 (v03 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF6000 00398C (v02 INSYDE HSW-LPT  00001000 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFF5000 0000A5 (v32 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: ASPT 0x000000009CFF4000 000034 (v07 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: BOOT 0x000000009CFF3000 000028 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: DBGP 0x000000009CFF2000 000034 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: HPET 0x000000009CFF0000 000038 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: LPIT 0x000000009CFEF000 000094 (v01 DELL   WN09     00000000 ASL  00040000)
[    0.000000] ACPI: APIC 0x000000009CFEE000 00008C (v03 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: MCFG 0x000000009CFED000 00003C (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: SLIC 0x000000009CFEC000 000176 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: WDAT 0x000000009CFEB000 000224 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD0000 0037AA (v02 INSYDE HSW-LPT  00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCF000 000BD3 (v02 INSYDE HSW-LPT  00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCE000 000539 (v02 INSYDE HSW-LPT  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCD000 000B74 (v02 INSYDE HSW-LPT  00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFC7000 005BEB (v02 INSYDE HSW-LPT  00003000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFC5000 0000D4 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: CSRT 0x000000009CFC4000 0000C4 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: FPDT 0x000000009CFC3000 000044 (v01 DELL   WN09     00000002 ASL  00040000)
[    0.000000] ACPI: BGRT 0x000000009CFC2000 000038 (v01 DELL   WN09     00000001 ASL  00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25eff8000-0x25effcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000085fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000869d9fff]
[    0.000000]   node   0: [mem 0x00000000872da000-0x000000009c4cefff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[    0.000000] On node 0 totalpages: 2075476
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3972 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9904 pages used for memmap
[    0.000000]   DMA32 zone: 633808 pages, LIFO batch:31
[    0.000000]   Normal zone: 22464 pages used for memmap
[    0.000000]   Normal zone: 1437696 pages, LIFO batch:31
[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[    0.000000] Reserving Intel graphics stolen memory at 0x9e000000-0x9fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x853c1000-0x853c1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x853d1000-0x853d1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x869da000-0x872d9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c4cf000-0x9cebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88025ec00000 s98008 r8192 d28968 u262144
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2043022
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-45-generic.efi.signed root=UUID=4676ebe4-a3dd-46af-b852-ab7f88aa2684 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7999284K/8301904K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 302620K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:760 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 2394.389 MHz processor
[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.77 BogoMIPS (lpj=9577556)
[    0.000033] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20150930
[    0.021922] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.024783] Security Framework initialized
[    0.024786] Yama: becoming mindful.
[    0.024803] AppArmor: AppArmor initialized
[    0.025308] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.026975] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.027739] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.027749] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.027971] Initializing cgroup subsys io
[    0.027974] Initializing cgroup subsys memory
[    0.027982] Initializing cgroup subsys devices
[    0.027984] Initializing cgroup subsys freezer
[    0.027986] Initializing cgroup subsys net_cls
[    0.027987] Initializing cgroup subsys perf_event
[    0.027989] Initializing cgroup subsys net_prio
[    0.027992] Initializing cgroup subsys hugetlb
[    0.027993] Initializing cgroup subsys pids
[    0.028016] CPU: Physical Processor ID: 0
[    0.028017] CPU: Processor Core ID: 0
[    0.028021] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028022] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029022] mce: CPU supports 7 MCE banks
[    0.029035] CPU0: Thermal monitoring enabled (TM1)
[    0.029043] process: using mwait in idle threads
[    0.029046] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.029047] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.029406] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[    0.033781] ftrace: allocating 32007 entries in 126 pages
[    0.047613] smpboot: Max logical packages: 4
[    0.047615] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.047624] DMAR: Host address width 39
[    0.047626] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.047634] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.047635] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.047639] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.047640] DMAR: RMRR base: 0x0000009ce66000 end: 0x0000009ce85fff
[    0.047641] DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.047642] DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.047644] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.047645] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.047646] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.047647] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.048227] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.048229] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.049302] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088993] TSC deadline timer enabled
[    0.088997] smpboot: CPU0: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.089015] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
[    0.089034] ... version:                3
[    0.089035] ... bit width:              48
[    0.089035] ... generic registers:      4
[    0.089036] ... value mask:             0000ffffffffffff
[    0.089037] ... max period:             0000ffffffffffff
[    0.089038] ... fixed-purpose events:   3
[    0.089039] ... event mask:             000000070000000f
[    0.089847] x86: Booting SMP configuration:
[    0.089849] .... node  #0, CPUs:      #1
[    0.091279] microcode: CPU1 microcode updated early to revision 0x22, date = 2015-09-11
[    0.094481] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.094543]  #2 #3
[    0.101772] x86: Booted up 1 node, 4 CPUs
[    0.101776] smpboot: Total of 4 processors activated (19155.11 BogoMIPS)
[    0.106297] devtmpfs: initialized
[    0.108493] evm: security.selinux
[    0.108495] evm: security.SMACK64
[    0.108495] evm: security.SMACK64EXEC
[    0.108496] evm: security.SMACK64TRANSMUTE
[    0.108497] evm: security.SMACK64MMAP
[    0.108498] evm: security.ima
[    0.108499] evm: security.capability
[    0.108551] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[    0.108635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108723] pinctrl core: initialized pinctrl subsystem
[    0.108850] RTC time:  1:16:09, date: 10/30/16
[    0.108959] NET: Registered protocol family 16
[    0.118135] cpuidle: using governor ladder
[    0.130143] cpuidle: using governor menu
[    0.130147] PCCT header not found.
[    0.130209] Simple Boot Flag at 0x44 set to 0x1
[    0.130255] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.130257] ACPI: bus type PCI registered
[    0.130258] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130333] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.130335] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.130347] PCI: Using configuration type 1 for base access
[    0.130472] dmi type 0xB1 record - unknown flag
[    0.146455] ACPI: Added _OSI(Module Device)
[    0.146457] ACPI: Added _OSI(Processor Device)
[    0.146458] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.146459] ACPI: Added _OSI(Processor Aggregator Device)
[    0.151747] ACPI: Executed 19 blocks of module-level executable AML code
[    0.156980] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.167423] ACPI: Dynamic OEM Table Load:
[    0.167433] ACPI: SSDT 0xFFFF8802548F3800 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.168274] ACPI: Dynamic OEM Table Load:
[    0.168283] ACPI: SSDT 0xFFFF880254E32800 0005AA (v02 PmRef  ApIst    00003000 INTL 20130117)
[    0.169161] ACPI: Dynamic OEM Table Load:
[    0.169168] ACPI: SSDT 0xFFFF880254974400 000119 (v02 PmRef  ApCst    00003000 INTL 20130117)
[    0.170864] ACPI : EC: EC started
[    0.171290] ACPI: Interpreter enabled
[    0.171299] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.171306] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.171329] ACPI: (supports S0 S3 S4 S5)
[    0.171330] ACPI: Using IOAPIC for interrupt routing
[    0.171356] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.171813] ACPI: Power Resource [PG00] (on)
[    0.172183] ACPI: Power Resource [PG01] (on)
[    0.172544] ACPI: Power Resource [PG02] (on)
[    0.183791] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.193438] ACPI: Power Resource [FN00] (off)
[    0.193508] ACPI: Power Resource [FN01] (off)
[    0.193574] ACPI: Power Resource [FN02] (off)
[    0.193638] ACPI: Power Resource [FN03] (off)
[    0.193703] ACPI: Power Resource [FN04] (off)
[    0.194475] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.194481] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.195550] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.195551] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.196241] PCI host bridge to bus 0000:00
[    0.196244] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.196246] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.196248] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.196249] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.196250] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.196252] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.196253] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.196254] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.196256] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.196257] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.196258] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.196260] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.196261] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.196262] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.196264] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.196265] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.196266] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfe113fff window]
[    0.196268] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.196275] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.196530] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.196544] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.196550] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.196554] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.196816] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.196828] pci 0000:00:03.0: reg 0x10: [mem 0xc1118000-0xc111bfff 64bit]
[    0.197085] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[    0.197099] pci 0000:00:04.0: reg 0x10: [mem 0xc1110000-0xc1117fff 64bit]
[    0.197400] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.197466] pci 0000:00:14.0: reg 0x10: [mem 0xc1100000-0xc110ffff 64bit]
[    0.197599] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.197819] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.197869] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.197940] pci 0000:00:16.0: reg 0x10: [mem 0xc1121000-0xc112101f 64bit]
[    0.198080] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.198383] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.198445] pci 0000:00:1b.0: reg 0x10: [mem 0xc111c000-0xc111ffff 64bit]
[    0.198554] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.198793] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.198847] pci 0000:00:1c.0: [8086:9c94] type 01 class 0x060400
[    0.199036] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.199307] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.199371] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.200356] pci 0000:00:1d.0: reg 0x10: [mem 0xc1125000-0xc11253ff]
[    0.206033] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.206263] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.206310] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.206779] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.206836] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.206854] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.206871] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.206889] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.206906] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.206924] pci 0000:00:1f.2: reg 0x24: [mem 0xc1124000-0xc11247ff]
[    0.206997] pci 0000:00:1f.2: PME# supported from D3hot
[    0.207244] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.207284] pci 0000:00:1f.3: reg 0x10: [mem 0xc1120000-0xc11200ff 64bit]
[    0.207336] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.207631] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.207715] pci 0000:00:1f.6: reg 0x10: [mem 0xc1123000-0xc1123fff 64bit]
[    0.208413] pci 0000:01:00.0: [8086:095a] type 00 class 0x028000
[    0.208525] pci 0000:01:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit]
[    0.208876] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.209002] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.213696] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.213704] pci 0000:00:1c.0:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.215547] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.215597] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.215644] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.215692] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.215740] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.215785] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.215831] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.215878] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.218441] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.218486] ACPI : EC: GPE = 0x22, I/O: command/status = 0x66, data = 0x62
[    0.218585] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.218586] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.218589] vgaarb: loaded
[    0.218590] vgaarb: bridge control possible 0000:00:02.0
[    0.218782] SCSI subsystem initialized
[    0.218814] libata version 3.00 loaded.
[    0.218832] ACPI: bus type USB registered
[    0.218847] usbcore: registered new interface driver usbfs
[    0.218854] usbcore: registered new interface driver hub
[    0.218866] usbcore: registered new device driver usb
[    0.219039] PCI: Using ACPI for IRQ routing
[    0.238005] PCI: pci_cache_line_size set to 64 bytes
[    0.238350] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.238352] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.238353] e820: reserve RAM buffer [mem 0x853c1018-0x87ffffff]
[    0.238354] e820: reserve RAM buffer [mem 0x869da000-0x87ffffff]
[    0.238355] e820: reserve RAM buffer [mem 0x9c4cf000-0x9fffffff]
[    0.238357] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.238358] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.238462] NetLabel: Initializing
[    0.238463] NetLabel:  domain hash size = 128
[    0.238464] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.238475] NetLabel:  unlabeled traffic allowed by default
[    0.238548] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.238552] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.240572] amd_nb: Cannot enumerate AMD northbridges
[    0.240586] clocksource: Switched to clocksource hpet
[    0.246133] AppArmor: AppArmor Filesystem Enabled
[    0.246197] pnp: PnP ACPI init
[    0.246379] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.246382] system 00:00: [io  0xffff] has been reserved
[    0.246384] system 00:00: [io  0xffff] has been reserved
[    0.246386] system 00:00: [io  0xffff] has been reserved
[    0.246388] system 00:00: [io  0x1800-0x18fe] could not be reserved
[    0.246390] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.246393] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246437] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.246477] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.246479] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.246518] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.246520] system 00:03: [mem 0xfe800000-0xfe802fff] has been reserved
[    0.246523] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.246688] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.246715] pnp 00:05: Plug and Play ACPI device, IDs DLL065a SYN0600 SYN0002 PNP0f13 (active)
[    0.247184] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
[    0.247186] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[    0.247189] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.247775] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.247777] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.247779] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.247781] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.247783] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.247785] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.247787] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.247789] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.247791] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[    0.247793] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.247795] system 00:07: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.247797] system 00:07: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.247799] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250319] pnp: PnP ACPI: found 8 devices
[    0.256573] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.256620] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.256630] pci 0000:00:1c.0:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.256648] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.256649] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.256651] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.256652] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.256653] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.256655] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.256656] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.256657] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.256659] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.256660] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.256661] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.256663] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.256664] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.256665] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.256667] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.256668] pci_bus 0000:00: resource 19 [mem 0xa0000000-0xdfffffff window]
[    0.256669] pci_bus 0000:00: resource 20 [mem 0xfe000000-0xfe113fff window]
[    0.256671] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc10fffff]
[    0.256699] NET: Registered protocol family 2
[    0.256846] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.256962] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.257118] TCP: Hash tables configured (established 65536 bind 65536)
[    0.257142] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.257166] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.257222] NET: Registered protocol family 1
[    0.257237] pci 0000:00:02.0: Video device with shadowed ROM
[    0.257314] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.257315] pci 0000:00:14.0: PCI INT A: no GSI
[    0.272855] PCI: CLS 64 bytes, default 64
[    0.272899] Trying to unpack rootfs image as initramfs...
[    0.828130] Freeing initrd memory: 36744K (ffff88003dc19000 - ffff88003fffb000)
[    0.828179] DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[    0.828189] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.828191] software IO TLB [mem 0x9802a000-0x9c02a000] (64MB) mapped at [ffff88009802a000-ffff88009c029fff]
[    0.828255] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.828256] hw unit of domain pp0-core 2^-14 Joules
[    0.828257] hw unit of domain package 2^-14 Joules
[    0.828258] hw unit of domain dram 2^-14 Joules
[    0.828259] hw unit of domain pp1-gpu 2^-14 Joules
[    0.828397] Scanning for low memory corruption every 60 seconds
[    0.828730] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.828772] audit: initializing netlink subsys (disabled)
[    0.828786] audit: type=2000 audit(1477790169.812:1): initialized
[    0.829194] Initialise system trusted keyring
[    0.829316] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.829317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.830574] zbud: loaded
[    0.830753] VFS: Disk quotas dquot_6.6.0
[    0.830794] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.831010] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.831231] fuse init (API version 7.23)
[    0.831353] Key type big_key registered
[    0.831381] Allocating IMA MOK and blacklist keyrings.
[    0.831827] Key type asymmetric registered
[    0.831829] Asymmetric key parser 'x509' registered
[    0.831857] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.831890] io scheduler noop registered
[    0.831892] io scheduler deadline registered (default)
[    0.831917] io scheduler cfq registered
[    0.832323] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.832324] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.832336] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.832342] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.832348] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.832379] efifb: probing for efifb
[    0.832390] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90001000000, using 8100k, total 8100k
[    0.832391] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.832392] efifb: scrolling: redraw
[    0.832393] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.832487] Console: switching to colour frame buffer device 240x67
[    0.832507] fb0: EFI VGA frame buffer device
[    0.832515] intel_idle: MWAIT substates: 0x11142120
[    0.832516] intel_idle: v0.4.1 model 0x3D
[    0.832517] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.832790] ACPI: AC Adapter [ADP1] (on-line)
[    0.832858] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.832861] ACPI: Sleep Button [SLPB]
[    0.832889] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.832891] ACPI: Power Button [PWRB]
[    0.832919] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.832943] ACPI: Lid Switch [LID0]
[    0.832973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.832975] ACPI: Power Button [PWRF]
[    0.833019] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    0.833024] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff8802560fb7a8), AE_NOT_FOUND (20150930/psparse-542)
[    0.833030] acpi PNP0C0B:00: Failed to change power state to D0
[    0.833050] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    0.833052] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff8802560fb7a8), AE_NOT_FOUND (20150930/psparse-542)
[    0.833057] acpi PNP0C0B:00: Setting initial power state
[    0.852647] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
[    0.865200] thermal LNXTHERM:00: registered as thermal_zone0
[    0.865202] ACPI: Thermal Zone [THM] (57 C)
[    0.865277] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    0.865281] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff8802560fbf28), AE_NOT_FOUND (20150930/psparse-542)
[    0.865354] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    0.865357] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff8802560fbf28), AE_NOT_FOUND (20150930/psparse-542)
[    0.865394] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    0.865396] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff880256100000), AE_NOT_FOUND (20150930/psparse-542)
[    0.865427] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECRD] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[    0.865430] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff880256100000), AE_NOT_FOUND (20150930/psparse-542)
[    0.865464] GHES: HEST is not enabled!
[    0.865559] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.867159] Linux agpgart interface v0.103
[    0.869617] brd: module loaded
[    0.870735] loop: module loaded
[    0.870907] libphy: Fixed MDIO Bus: probed
[    0.870910] tun: Universal TUN/TAP device driver, 1.6
[    0.870911] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.870945] PPP generic driver version 2.4.2
[    0.870995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.870998] ehci-pci: EHCI PCI platform driver
[    0.871119] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.871124] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.871145] ehci-pci 0000:00:1d.0: debug port 2
[    0.872885] ACPI: Battery Slot [BAT0] (battery present)
[    0.875049] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.875062] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1125000
[    0.888689] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.888745] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.888747] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888748] usb usb1: Product: EHCI Host Controller
[    0.888750] usb usb1: Manufacturer: Linux 4.4.0-45-generic ehci_hcd
[    0.888751] usb usb1: SerialNumber: 0000:00:1d.0
[    0.888942] hub 1-0:1.0: USB hub found
[    0.888948] hub 1-0:1.0: 2 ports detected
[    0.889075] ehci-platform: EHCI generic platform driver
[    0.889097] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.889102] ohci-pci: OHCI PCI platform driver
[    0.889112] ohci-platform: OHCI generic platform driver
[    0.889122] uhci_hcd: USB Universal Host Controller Interface driver
[    0.889228] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    0.889229] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    0.889259] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.889263] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.890443] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.890452] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.890578] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.890580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.890581] usb usb2: Product: xHCI Host Controller
[    0.890583] usb usb2: Manufacturer: Linux 4.4.0-45-generic xhci-hcd
[    0.890584] usb usb2: SerialNumber: 0000:00:14.0
[    0.890743] hub 2-0:1.0: USB hub found
[    0.890774] hub 2-0:1.0: 11 ports detected
[    0.893473] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.893476] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.893508] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    0.893510] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.893511] usb usb3: Product: xHCI Host Controller
[    0.893512] usb usb3: Manufacturer: Linux 4.4.0-45-generic xhci-hcd
[    0.893513] usb usb3: SerialNumber: 0000:00:14.0
[    0.893674] hub 3-0:1.0: USB hub found
[    0.893688] hub 3-0:1.0: 4 ports detected
[    0.894600] usb: port power management may be unreliable
[    0.894704] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.899223] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.899226] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.899466] mousedev: PS/2 mouse device common for all mice
[    0.899799] rtc_cmos 00:01: RTC can wake from S4
[    0.900037] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.900092] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.900100] i2c /dev entries driver
[    0.900154] device-mapper: uevent: version 1.0.3
[    0.900217] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.900239] Intel P-state driver initializing.
[    0.900399] ledtrig-cpu: registered to indicate activity on CPUs
[    0.900410] EFI Variables Facility v0.08 2004-May-17
[    0.922296] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.932667] NET: Registered protocol family 10
[    0.932825] NET: Registered protocol family 17
[    0.932834] Key type dns_resolver registered
[    0.933042] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x22
[    0.933053] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x22
[    0.933097] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x22
[    0.933101] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x22
[    0.933172] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.935680] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring'
[    0.935689] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring'
[    0.935878] EFI: Loaded cert ': 9b398b58bae7d28e4449e715084144d8' linked to '.system_keyring'
[    0.936652] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.system_keyring'
[    0.937698] EFI: Loaded cert 'QA Certificate.: 455143dd9167bdb84979711692bcf6ef' linked to '.system_blacklist_keyring'
[    0.937716] registered taskstats version 1
[    0.937727] Loading compiled-in X.509 certificates
[    0.938298] Loaded X.509 cert 'Build time autogenerated kernel key: 5295ae568fdd4deae5e4e5c175542790e6aaeab9'
[    0.938322] zswap: loaded using pool lzo/zbud
[    0.939970] Key type trusted registered
[    0.943035] Key type encrypted registered
[    0.943042] AppArmor: AppArmor sha1 policy hashing enabled
[    0.943044] ima: No TPM chip found, activating TPM-bypass!
[    0.943062] evm: HMAC attrs: 0x1
[    0.943648]   Magic number: 4:103:257
[    0.943786] rtc_cmos 00:01: setting system clock to 2016-10-30 01:16:10 UTC (1477790170)
[    0.943855] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.943855] EDD information not available.
[    0.944875] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    0.944876] Write protecting the kernel read-only data: 14336k
[    0.945341] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[    0.945674] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    0.954027] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954079] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954088] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954398] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954436] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954613] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954650] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954684] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954718] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.954755] random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[    0.975913] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.978886] sdhci: Secure Digital Host Controller Interface driver
[    0.978888] sdhci: Copyright(c) Pierre Ossman
[    0.980564] hidraw: raw HID events driver (C) Jiri Kosina
[    0.994658] wmi: Mapper loaded
[    0.999635] ahci 0000:00:1f.2: version 3.0
[    0.999888] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    0.999892] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.001509] [drm] Initialized drm 1.1.0 20060810
[    1.004054] scsi host0: ahci
[    1.004209] scsi host1: ahci
[    1.004663] scsi host2: ahci
[    1.004787] scsi host3: ahci
[    1.004841] ata1: SATA max UDMA/133 abar m2048@0xc1124000 port 0xc1124100 irq 44
[    1.004843] ata2: DUMMY
[    1.004845] ata3: DUMMY
[    1.004846] ata4: DUMMY
[    1.022772] [drm] Memory usable by graphics device = 4096M
[    1.022775] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
[    1.022776] fb: switching to inteldrmfb from EFI VGA
[    1.022799] Console: switching to colour dummy device 80x25
[    1.022878] [drm] Replacing VGA console driver
[    1.028798] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.028800] [drm] Driver supports precise vblank timestamp query.
[    1.029249] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.074416] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.074638] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    1.074762] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    1.097970] fbcon: inteldrmfb (fb0) is primary device
[    1.098035] Console: switching to colour frame buffer device 240x67
[    1.098058] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.200685] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.204677] usb 2-4: new full-speed USB device number 2 using xhci_hcd
[    1.324721] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.333062] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
[    1.333064] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.333310] hub 1-1:1.0: USB hub found
[    1.333385] hub 1-1:1.0: 8 ports detected
[    1.334168] usb 2-4: New USB device found, idVendor=0483, idProduct=91d1
[    1.334180] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.334181] usb 2-4: Product: ST_SENSOR_HUB
[    1.334184] usb 2-4: Manufacturer: STMicroelectronics
[    1.334185] usb 2-4: SerialNumber: ST_SENSOR_HUB
[    1.342323] usbcore: registered new interface driver usbhid
[    1.342325] usbhid: USB HID core driver
[    1.500694] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[    1.502324] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.502738] ata1.00: ATA-9: ST500LM000-1EJ162, DEM9, max UDMA/133
[    1.502741] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.549252] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.549605] ata1.00: configured for UDMA/133
[    1.556897] scsi 0:0:0:0: Direct-Access     ATA      ST500LM000-1EJ16 DEM9 PQ: 0 ANSI: 5
[    1.557224] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.557225] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.557228] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.557321] sd 0:0:0:0: [sda] Write Protect is off
[    1.557324] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.557369] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.560366]  sda: sda1 sda2 sda3 sda4
[    1.560773] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.766474] usb 2-5: New USB device found, idVendor=0c45, idProduct=64cb
[    1.766477] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.766479] usb 2-5: Product: Integrated_Webcam_HD
[    1.766480] usb 2-5: Manufacturer: CN0GNXH5724874CPA1MRA00
[    1.824684] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[    1.824688] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns
[    1.940711] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[    1.958974] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.971321] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4704]
[    2.001579] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1148..]
[    2.060400] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800/0x0, board id: 3017, fw id: 1752976
[    2.070454] usb 2-6: New USB device found, idVendor=8087, idProduct=0a2a
[    2.070457] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.097536] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.184714] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[    2.314618] usb 2-7: New USB device found, idVendor=04f3, idProduct=2033
[    2.314621] usb 2-7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[    2.314623] usb 2-7: Product: Touchscreen
[    2.314624] usb 2-7: Manufacturer: ELAN
[    2.314784] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.801074] random: nonblocking pool is initialized
[    2.824868] clocksource: Switched to clocksource tsc
[    3.470448] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.470553] systemd[1]: Detected architecture x86-64.
[    3.487461] systemd[1]: Set hostname to <brandon-Inspiron-7348>.
[    4.895215] systemd[1]: Listening on Syslog Socket.
[    4.895263] systemd[1]: Reached target Remote File Systems (Pre).
[    4.895290] systemd[1]: Listening on Journal Socket.
[    4.895372] systemd[1]: Created slice System Slice.
[    4.895433] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.908910] systemd[1]: Starting Uncomplicated firewall...
[    4.909278] systemd[1]: Starting Set console keymap...
[    4.909622] systemd[1]: Started Read required files in advance.
[    4.909806] systemd[1]: Reached target Encrypted Volumes.
[    4.909856] systemd[1]: Listening on udev Kernel Socket.
[    4.910264] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.910281] systemd[1]: Reached target Remote File Systems.
[    4.910331] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.910484] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.923554] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.923618] systemd[1]: Listening on Journal Audit Socket.
[    4.923965] systemd[1]: Starting Journal Service...
[    4.924340] systemd[1]: Mounting POSIX Message Queue File System...
[    4.924823] systemd[1]: Mounting Debug File System...
[    4.929359] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.929403] systemd[1]: Reached target User and Group Name Lookups.
[    4.930575] systemd[1]: Starting Load Kernel Modules...
[    4.930629] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.931097] systemd[1]: Started Braille Device Support.
[    4.931200] systemd[1]: Listening on udev Control Socket.
[    4.931302] systemd[1]: Created slice User and Session Slice.
[    4.931314] systemd[1]: Reached target Slices.
[    4.931620] systemd[1]: Mounting Huge Pages File System...
[    5.185226] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.196859] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.242121] systemd[1]: Started Uncomplicated firewall.
[    5.460917] systemd[1]: Mounted Debug File System.
[    5.460960] systemd[1]: Mounted Huge Pages File System.
[    5.460983] systemd[1]: Mounted POSIX Message Queue File System.
[    5.578636] lp: driver loaded but no devices found
[    5.621141] ppdev: user-space parallel port driver
[    5.665976] systemd[1]: Started Journal Service.
[    7.080690] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    7.158438] systemd-journald[230]: Received request to flush runtime journal from PID 1
[    7.473181] input: DELL Wireless hotkeys as /devices/virtual/input/input8
[    7.589126] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    7.591831] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.635957] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input9
[    7.939347] Intel(R) Wireless WiFi driver for Linux
[    7.939350] Copyright(c) 2003- 2015 Intel Corporation
[    7.941021] iwlwifi 0000:01:00.0: Unsupported splx structure
[    8.044752] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2
[    8.044771] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2
[    8.045180] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
[    8.101755] iwlwifi 0000:01:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
[    8.252714] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.390833] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.390867] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    8.422911] AVX2 version of gcm_enc/dec engaged.
[    8.422913] AES CTR mode by8 optimization enabled
[    8.435687] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[    8.436026] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[    8.436468] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[    8.473306] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    8.473309] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.473311] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.473313] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    8.473314] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    8.473316] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x19
[    8.473317] snd_hda_codec_realtek hdaudioC1D0:      Headphone Mic=0x1a
[    8.473319] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    8.542788] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[    8.542836] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[    8.542875] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[    8.546893] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    8.759804] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    8.968326] input: ELAN Touchscreen Pen as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:04F3:2033.0002/input/input14
[    8.969085] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:04F3:2033.0002/input/input15
[    8.969261] hid-multitouch 0003:04F3:2033.0002: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
[    8.974557] input: Dell WMI hotkeys as /devices/virtual/input/input17
[    8.979769] input: DLL0675:00 06CB:75DB Touchpad as /devices/pci0000:00/INT3433:00/i2c-5/i2c-DLL0675:00/0018:06CB:75DB.0003/input/input18
[    8.979858] hid-multitouch 0018:06CB:75DB.0003: input,hidraw1: I2C HID v1.00 Mouse [DLL0675:00 06CB:75DB] on i2c-DLL0675:00
[    8.998537] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[    9.479392] intel_rapl: Found RAPL domain package
[    9.479395] intel_rapl: Found RAPL domain core
[    9.479398] intel_rapl: Found RAPL domain uncore
[    9.479400] intel_rapl: Found RAPL domain dram
[    9.479404] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.479408] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    9.972854] Adding 15625212k swap on /dev/sda3.  Priority:-1 extents:1 across:15625212k FS
[   10.174607] cfg80211: World regulatory domain updated:
[   10.174610] cfg80211:  DFS Master region: unset
[   10.174611] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.174613] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.174615] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.174616] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.174617] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   10.174619] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   10.174620] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.174621] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.174622] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.279494] Bluetooth: Core ver 2.21
[   10.279509] NET: Registered protocol family 31
[   10.279511] Bluetooth: HCI device and connection manager initialized
[   10.279514] Bluetooth: HCI socket layer initialized
[   10.279516] Bluetooth: L2CAP socket layer initialized
[   10.279524] Bluetooth: SCO socket layer initialized
[   10.405975] media: Linux media interface: v0.10
[   10.454695] Linux video capture interface: v2.00
[   10.745385] usbcore: registered new interface driver btusb
[   10.759731] Bluetooth: hci0: read Intel version: 370810011003110e00
[   10.790324] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:64cb)
[   10.832015] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input20
[   10.832117] usbcore: registered new interface driver uvcvideo
[   10.832119] USB Video Class driver (1.1.1)
[   10.837332] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[   11.148741] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   12.357060] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   14.494689] audit: type=1400 audit(1477790184.045:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=857 comm="apparmor_parser"
[   14.494695] audit: type=1400 audit(1477790184.045:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=857 comm="apparmor_parser"
[   14.494699] audit: type=1400 audit(1477790184.045:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=857 comm="apparmor_parser"
[   14.494702] audit: type=1400 audit(1477790184.045:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=857 comm="apparmor_parser"
[   14.508139] audit: type=1400 audit(1477790184.057:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=861 comm="apparmor_parser"
[   14.508145] audit: type=1400 audit(1477790184.057:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=861 comm="apparmor_parser"
[   14.545911] audit: type=1400 audit(1477790184.097:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=856 comm="apparmor_parser"
[   14.545918] audit: type=1400 audit(1477790184.097:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=856 comm="apparmor_parser"
[   14.551241] audit: type=1400 audit(1477790184.101:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=860 comm="apparmor_parser"
[   14.551249] audit: type=1400 audit(1477790184.101:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=860 comm="apparmor_parser"
[   18.304697] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.304702] Bluetooth: BNEP filters: protocol multicast
[   18.304706] Bluetooth: BNEP socket layer initialized
[   23.109827] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   23.110220] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[   23.110662] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[   23.172136] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[   23.172676] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[   23.208606] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   23.824735] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   24.109621] Guest personality initialized and is inactive
[   24.109758] VMCI host device registered (name=vmci, major=10, minor=53)
[   24.109760] Initialized host personality
[   24.133382] NET: Registered protocol family 40
[   28.402654] Non-volatile memory driver v1.3
[   29.447193] Bluetooth: RFCOMM TTY layer initialized
[   29.447199] Bluetooth: RFCOMM socket layer initialized
[   29.447203] Bluetooth: RFCOMM ver 1.11
[   80.262245] wlp1s0: authenticate with 74:44:01:42:a3:14
[   80.268941] wlp1s0: send auth to 74:44:01:42:a3:14 (try 1/3)
[   80.271820] wlp1s0: authenticated
[   80.274937] wlp1s0: associate with 74:44:01:42:a3:14 (try 1/3)
[   80.278594] wlp1s0: RX AssocResp from 74:44:01:42:a3:14 (capab=0x411 status=0 aid=4)
[   80.279998] wlp1s0: associated
[   80.280034] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  718.729320] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  718.729325] Bluetooth: HIDP socket layer initialized
[  722.711580] wiimote 0005:057E:0330.0004: unknown main item tag 0x0
[  722.711652] wiimote 0005:057E:0330.0004: hidraw2: BLUETOOTH HID v0.01 Gamepad [Nintendo RVL-CNT-01-UC] on 60:57:18:9d:b7:0e
[  722.711660] wiimote 0005:057E:0330.0004: New device registered
[  722.773234] wiimote 0005:057E:0330.0004: detected device: Nintendo Wii U Pro Controller
[  722.808176] wiimote 0005:057E:0330.0004: detected extension: Nintendo Wii U Pro Controller
[  722.808286] input: Nintendo Wii Remote Pro Controller as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/bluetooth/hci0/hci0:512/0005:057E:0330.0004/input/input21
[  909.922705] wiimote 0005:057E:0330.0004: Device removed
[  918.061126] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  918.091600] wlp1s0: deauthenticating from 74:44:01:42:a3:14 by local choice (Reason: 3=DEAUTH_LEAVING)
[  919.465809] PM: Syncing filesystems ... done.
[  919.647820] PM: Preparing system for sleep (mem)
[  919.648237] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  919.649997] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  919.651130] PM: Suspending system (mem)
[  919.651145] Suspending console(s) (use no_console_suspend to debug)
[  919.652231] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  919.670356] sd 0:0:0:0: [sda] Stopping disk
[  919.712120] psmouse serio1: Failed to disable mouse on isa0060/serio1
[  920.052873] PM: suspend of devices complete after 401.572 msecs
[  920.053173] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[  920.053177] ACPI Error: Method parse/execution failed [\_TZ.FN04._OFF] (Node ffff8802560fbcd0), AE_NOT_FOUND (20150930/psparse-542)
[  920.053199] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[  920.053201] ACPI Error: Method parse/execution failed [\_TZ.FN03._OFF] (Node ffff8802560fbb90), AE_NOT_FOUND (20150930/psparse-542)
[  920.053219] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[  920.053221] ACPI Error: Method parse/execution failed [\_TZ.FN02._OFF] (Node ffff8802560fba50), AE_NOT_FOUND (20150930/psparse-542)
[  920.053239] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[  920.053241] ACPI Error: Method parse/execution failed [\_TZ.FN01._OFF] (Node ffff8802560fb910), AE_NOT_FOUND (20150930/psparse-542)
[  920.068877] PM: late suspend of devices complete after 15.987 msecs
[  920.071022] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  920.071088] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  920.085200] PM: noirq suspend of devices complete after 16.318 msecs
[  920.085531] ACPI: Preparing to enter system sleep state S3
[  920.113613] ACPI : EC: EC stopped
[  920.113613] PM: Saving platform NVS memory
[  920.113616] Disabling non-boot CPUs ...
[  920.113830] Broke affinity for irq 44
[  920.114854] smpboot: CPU 1 is now offline
[  920.125320] Broke affinity for irq 23
[  920.125331] Broke affinity for irq 43
[  920.125335] Broke affinity for irq 44
[  920.125338] Broke affinity for irq 45
[  920.126382] smpboot: CPU 2 is now offline
[  920.137658] Broke affinity for irq 1
[  920.137663] Broke affinity for irq 6
[  920.137666] Broke affinity for irq 7
[  920.137669] Broke affinity for irq 8
[  920.137673] Broke affinity for irq 9
[  920.137677] Broke affinity for irq 12
[  920.137681] Broke affinity for irq 23
[  920.137686] Broke affinity for irq 39
[  920.137691] Broke affinity for irq 42
[  920.137695] Broke affinity for irq 43
[  920.137699] Broke affinity for irq 44
[  920.137703] Broke affinity for irq 45
[  920.137707] Broke affinity for irq 47
[  920.138751] smpboot: CPU 3 is now offline
[  920.150791] ACPI: Low-level resume complete
[  920.150902] ACPI : EC: EC started
[  920.150903] PM: Restoring platform NVS memory
[  920.153189] microcode: CPU0 microcode updated early to revision 0x22, date = 2015-09-11
[  920.153213] Enabling non-boot CPUs ...
[  920.171069] x86: Booting SMP configuration:
[  920.171070] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  920.172219] microcode: CPU1 microcode updated early to revision 0x22, date = 2015-09-11
[  920.175354]  cache: parent cpu1 should not be sleeping
[  920.175432] CPU1 is up
[  920.195116] smpboot: Booting Node 0 Processor 2 APIC 0x1
[  920.198839]  cache: parent cpu2 should not be sleeping
[  920.198944] CPU2 is up
[  920.223099] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  920.226671]  cache: parent cpu3 should not be sleeping
[  920.226751] CPU3 is up
[  920.230254] ACPI: Waking up from system sleep state S3
[  920.258753] acpi LNXPOWER:04: Turning ON
[  920.258769] acpi LNXPOWER:05: Turning ON
[  920.258784] acpi LNXPOWER:06: Turning ON
[  920.258799] acpi LNXPOWER:07: Turning ON
[  920.258828] acpi LNXPOWER:03: Turning OFF
[  920.258841] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECWT] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[  920.258844] ACPI Error: Method parse/execution failed [\_TZ.FN00._OFF] (Node ffff8802560fb7d0), AE_NOT_FOUND (20150930/psparse-542)
[  920.259506] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  920.275089] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  920.275520] PM: noirq resume of devices complete after 16.654 msecs
[  920.275807] PM: early resume of devices complete after 0.268 msecs
[  920.275966] usb usb2: root hub lost power or was reset
[  920.275967] usb usb3: root hub lost power or was reset
[  920.277511] rtc_cmos 00:01: System wakeup disabled by ACPI
[  920.279768] sd 0:0:0:0: [sda] Starting disk
[  920.503015] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[  920.603069] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  920.603642] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[  920.604569] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[  920.604973] ata1.00: configured for UDMA/133
[  920.607103] usb 2-7: reset full-speed USB device number 5 using xhci_hcd
[  920.735722] usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[  920.847068] usb 2-5: reset high-speed USB device number 3 using xhci_hcd
[  921.143032] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
[  921.214819] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4704]
[  921.274863] PM: resume of devices complete after 999.058 msecs
[  921.275319] PM: Finishing wakeup.
[  921.275320] Restarting tasks ... 
[  921.275647] usb 2-4: USB disconnect, device number 2
[  921.279196] pci_bus 0000:01: Allocating resources
[  921.279408] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[  921.279412] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[  921.279417] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  921.279425] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[  921.279427] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[  921.279429] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[  921.279431] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[  921.279447] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xa0100000-0xa02fffff 64bit pref]
[  921.279451] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[  921.279723] pci_bus 0000:01: Allocating resources
[  921.279928] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  921.280064] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  921.289321] Bluetooth: hci0: read Intel version: 370810011003110e00
[  921.289327] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[  921.295032] done.
[  921.299205] psmouse serio1: synaptics: device claims to have min coordinates query, but I'm not able to read it.
[  921.360098] psmouse serio1: synaptics: Unable to initialize device.
[  921.518973] usb 2-4: new full-speed USB device number 6 using xhci_hcd
[  921.597326] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[  921.648121] usb 2-4: New USB device found, idVendor=0483, idProduct=91d1
[  921.648124] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  921.648126] usb 2-4: Product: ST_SENSOR_HUB
[  921.648127] usb 2-4: Manufacturer: STMicroelectronics
[  921.648128] usb 2-4: SerialNumber: ST_SENSOR_HUB
[  924.160569] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  924.160999] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[  924.161691] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[  924.222579] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[  924.223436] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[  924.246265] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  924.292931] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  927.623363] wlp1s0: authenticate with 74:44:01:42:a3:14
[  927.628692] wlp1s0: send auth to 74:44:01:42:a3:14 (try 1/3)
[  927.630538] wlp1s0: authenticated
[  927.630905] wlp1s0: associate with 74:44:01:42:a3:14 (try 1/3)
[  927.634573] wlp1s0: RX AssocResp from 74:44:01:42:a3:14 (capab=0x411 status=0 aid=5)
[  927.636385] wlp1s0: associated
[  927.636414] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 3598.877258] do_trap: 51 callbacks suppressed
[ 3598.877271] traps: nautilus[2620] trap int3 ip:7f20d90d2a6b sp:7ffc40480c70 error:0

yaml files:

marco-c commented 8 years ago

I can reproduce this pretty consistently.

Do you think you'll be able to get to this soon? Or should I just remove fwupd for the time being?

hughsie commented 8 years ago

What version appstream-glib do you have installed?

marco-c commented 8 years ago

What version appstream-glib do you have installed?

The latest for Ubuntu 16.10: https://launchpad.net/ubuntu/+source/appstream-glib/0.6.3-1

hughsie commented 8 years ago

Right, the issue was fixed in 0.6.4 which was released a few weeks ago. Note, 0.6.5 has also been released since fixing that bug, so I think someone needs to update Ubuntu to something newer on a more regular basis.

superm1 commented 8 years ago

@hughsie are you expecting it to be commits https://github.com/hughsie/appstream-glib/commit/f0990480624f7f76f6d82a4d1d7356464e340880 and https://github.com/hughsie/appstream-glib/commit/57f6d00ff98cdc5e70913701b8a70d47b3e5649b in 0.6.4 that fixed it?

Ubuntu stable releases typically doesn't take new versions in the name of stability, but will cherry pick patches to fix issues. @robert-ancell FYI, there's a need to pull in some fixes in yakkety^.

hughsie commented 8 years ago

@superm1 My point is that I just can't QA 0.6.3 plus random patches. I already test all my stuff against all versions of deps of the lowest version and most newer tarballs since, and git master against git master. There are other yaml fixes in the code, e.g. a6c499d3b414237fca43c77b18300e8d753d6770 f0990480624f7f76f6d82a4d1d7356464e340880 and 57f6d00ff98cdc5e70913701b8a70d47b3e5649b as well as other important and stability fixes which are nothing to do with libyaml. I'm fine with Ubuntu patching stuff rather than rebasing (like RHEL often does) but I think these kind of bugs just need to be handled in Lauchpad rather than upstream.

marco-c commented 7 years ago

@robert-ancell ping. Should I report this on Launchpad?

robert-ancell commented 7 years ago

This is already reported at https://bugs.launchpad.net/ubuntu/+source/appstream-glib/+bug/1637024

waelbentaleb commented 7 years ago

I had the same problem and it can be an apt-get cache problem so it's recommended to clean the cache :

sudo -ic
apt-get clean
cd /var/lib/apt
mv lists lists.old
mkdir -p lists/partial
apt-get clean
apt-get update

or it can be a permission problem

sudo chown {user} /home/{user}/.cache/dconf

this solve the problem for me.

fwupd / fwupd

fwupd constantly using 100% of one CPU on Ubuntu 16.10 #70